Numerical modeling of coupled thermo-hydro-mechanical processes in geological porous media

Coupled Thermo-Hydro-Mechanical (THM) behavior in geological porous media has been a subject of great interest in many geoengineering disciplines. Many attempts have been made to develop numerical prediction capabilities associated with topics such as the movement of pollutant plumes, gas injection, energy storage, geothermal energy extraction, and safety assessment of repositories for radioactive waste and spent nuclear fuel. This thesis presents a new numerical modeling approach and a new computer code for simulating coupled THM behavior in geological porous media in general, and compacted bentonite clays in particular, as buffer materials in underground radioactive waste repositories. New governing equations were derived according to the theory of mixtures, considering interactions among solid-phase deformation, flows of water and gases, heat transport, and phase change of water. For three-dimensional problems, eight governing equations were formulated to describe the coupled THM processes. A new thermal conductivity model was developed to predict the thermal conductivity of geological porous media as composite mixtures. The proposed model considers the combined effects of solid mineral composition, temperature, liquid saturation degree, porosity and pressure on the effective thermal conductivity of the porous media. The predicted results agree well with the experimental data for MX80 bentonite. A new water retention curve model was developed to predict the suction-saturation behavior of the geological porous media, as a function of suction, effective saturated degree, temperature, porosity, pore-gas pressure, and the rate of saturation degree change with time. The model was verified against experimental data of the FEBEX bentonite, with good agreement between measured and calculated results. A new finite element code (ROLG) was developed for modeling fully coupled thermo-hydro-mechanical processes in geological porous media. The new code was validated against several analytical solutions and experiments, and was applied to simulate the large scale in-situ Canister Retrieval Test (CRT) at Äspö Hard Rock Laboratory, SKB, Sweden, with good agreement between measured and predicted results. The results are useful for performance and safety assessments of radioactive waste repositories.QC20100720THERES

p Pickering emulsions stabilized by biocompatible particles: A review of preparation, bioapplication, and perspective

The phenomenon of adsorption of solid particles at fluid interfaces to stabilize emulsions or foams have been known for more than a century. Today, particle-stabilized emulsions, often referred to as Pickering emulsions, are receiving growing attention as they are encountered in oil recovery and have long been used in personal care products and food industry. Over the past 10 years the focus of the Pickering emulsion has also increasingly shifted to biomedical applications with thanks to novel syntheses of a wide range of biocompatible particle stabilizers. Here, a brief overview of the development of biocompatible particles is given for Pickering emulsion stabilization, including alginate, poly(lactic-co-glycolic acid) (PLGA), and protein-based particles. The materials prepared by templating from emulsion stabilized with biocompatible particles include colloidal capsules and hierarchically porous materials. It is hoped that the understanding gained from the recent intense activity in the field will enable more researchers to modify existing materials and design new formulations, which would be beneficial for exploring more biological applications. (c) 2021 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Effect of Porosity on Soil-Water Retention Curves: Theoretical and Experimental Aspects

Porosity change is a common characteristic of natural soils in fluid-solid interaction problems, which can lead to an obvious change of the soil-water retention curve (SWRC). The influence of porosity on soil water retention phenomena is investigated by a theoretical model and an experimental test in this study. A model expressing the change in suction with porosity and effective saturation is put forward theoretically. The model is based on an idealization of three-phase porous materials, the pore structures of which are homogeneous and isotropic. It accounts for the porosity effect on soil water retention, using four parameters with clear physical meanings. The presented model can obtain the SWRC at any porosity, which will reduce the test number required in characterizing the hydraulic behavior of soil. A laboratory experiment for loamy sand with different porosities is performed. The test results show that suction has a significant variation with changes in porosity and decreases with the increase of porosity. The formulation is verified by both the test data and the literature data for FEBEX bentonite and Boom clay. The very good agreements between measured and predicted results show that the SWRC model is reliable and feasible for various soils

Physicochemical Properties of Lutein-Loaded Microcapsules and Their Uptake via Caco-2 Monolayers

Lutein is one of the most important carotenoids that can be utilized in foods as a natural pigment and nutraceutical ingredient to improve eye health. However, its utilization is limited due to its poor solubility. Chemically, the highly unsaturated structure of lutein makes it extremely susceptible to light, oxygen, heat, and pro-oxidants and therefore easily oxidized, decomposed or dissociated. In this study, we aimed to imbed natural lutein to improve its storage stability and enhance its water dispersibility. As two commonly studied water-soluble and water-insoluble food-grade surfactants, sodium caseinate (NaCas) and lecithin were chosen as the wall materials, and lutein-loaded lecithin microcapsules and NaCas microcapsules were prepared, the results revealed the lutein-loaded NaCas microcapsules not only exhibited better dispersibility and stability than those of lutein-loaded lecithin microcapsules, but also were more stable when stored at 4 °C, 25 °C, 37 °C. Moreover, the lutein-loaded NaCas microcapsules were more easily absorbed by the intestinal Caco-2 cells than natural lutein. Considering the dispersibility, stability and cell absorption effect, the NaCas-based microparticle is a potential carrier for lutein

Microstructural Evolution and Mechanical Properties of 7075 Aluminium Alloy during Semi-Solid Compression Deformation

Aluminium alloys are becoming increasingly popular due to the demands for high-performance lightweight components, and semi-solid metal processing (SSM) is a technique for forming near-net-shape and complex components with far fewer defects associated with turbulent filling. The deformation mechanisms of semi-solid 7075 aluminium alloy were studied through the direct partial re-melting method using as-extruded billets. It is found that inter-granular and intra-granular deformation occur simultaneously during compression under the semi-solid condition; the deformation of solid primary α-Al grains can compensate for the shrinkage of inter-granular liquid and increase the integrity of shaped parts. The intra-granular deformation at the final stage of SSM can change the morphology of spherical solid grains and induces sub-grain boundaries