New highly radioactive particles derived from Fukushima Daiichi Reactor Unit 1 : Properties and environmental impacts

A contaminated zone elongated toward Futaba Town, north-northwest of the Fukushima Daiichi Nuclear Power Plant (FDNPP), contains highly radioactive particles released from reactor Unit 1. There are uncertainties associated with the physio-chemical properties and environmental impacts of these particles. In this study, 31 radioactive particles were isolated from surface soils collected 3.9 km north-northwest of the FDNPP. Two of these particles have the highest particle-associated 134+137Cs activity ever reported for Fukushima (6.1 × 105 and 2.5 × 106 Bq per particle after decay-correction to March 2011). The new, highly-radioactive particle labeled FTB1 is an aggregate of flaky silicate nanoparticles with an amorphous structure containing ~0.8 wt% Cs, occasionally associated with SiO2 and TiO2 inclusions. FTB1 likely originates from the reactor building, which was damaged by a H2 explosion, after adsorbing volatilized Cs. The 134+137Cs activity in the other highly radioactive particle labeled FTB26 exceeded 106 Bq. FTB26 has a glassy carbon core and a surface that is embedded with numerous micro-particles: Pb–Sn alloy, fibrous Al-silicate, Ca-carbonate or hydroxide, and quartz. The isotopic signatures of the micro-particles indicate neutron capture by B, Cs volatilization, and adsorption of natural Ba. The composition of the micro-particles on FTB26 reflects the composition of airborne particles at the moment of the H2 explosion. Owing to their large size, the health effects of the highly radioactive particles are likely limited to external radiation during static contact with skin; the highly radioactive particles are thus expected to have negligible health impacts for humans. By investigating the mobility of the highly radioactive particles, we can better understand how the radiation dose transfers through environments impacted by Unit 1. The highly radioactive particles also provide insights into the atmospheric conditions at the time of the Unit 1 explosion and the physio-chemical phenomena that occurred during reactor meltdown.Peer reviewe

Ten years after the NPP accident at Fukushima : review on fuel debris behavior in contact with water

International audienceFollowing the NPP accident, several hundred tons of heat-generating corium and fuel debris have been cooled permanently by millions of m3 of flowing. Knowledge on the interaction with water is cruc..

Occurrence of radioactive cesium-rich micro-particles (CsMPs) in a school building located 2.8 km south-west of the Fukushima Daiichi Nuclear Power Plant

International audienceRadioactive Cs-rich microparticles (CsMPs) released from the Fukushima Daiichi Nuclear Power Plant (FDNPP) are a potential health risk through inhalation. Little has been documented on the occurrence of CsMPs, particularly their occurrence inside buildings. In this study, we quantitatively analyze the distribution and number of CsMPs in indoor dust samples collected from an elementary school located 2.8 km to the southwest of FDNPP. The school had remained deserted until 2016. Then, using a modified version of the autoradiography-based “quantifying CsMPs (mQCP) method,” we collected samples and determined the number of CsMPs and Cs radioactive fraction (RF) values of the microparticles (defined as total Cs activity from CsMPs/bulk Cs activity of the entire sample). The numbers of CsMPs ranged from 653 to 2570 particles/(g dust) and 296–1273 particles/(g dust) on the first and second floors of the school, respectively. The corresponding RFs ranged between 6.85 – 38.9% and 4.48–6.61%, respectively. The number of CsMPs and RF values in additional outdoor samples collected near the school building were 23–63 particles/(g dust or soil) and 1.14–1.61%, respectively. The CsMPs were most abundant on the school's first floor near to the entrance, and the relative abundance was higher near the stairs on the second floor, indicating a likely CsMP dispersion path through the building. Additional wetting of the indoor samples combined with autoradiography revealed that indoor dusts had a distinct absence of intrinsic, soluble Cs species, such as CsOH. These combined observations indicate that a significant amount of poorly soluble CsMPs were likely contained in initial radioactive airmass plumes from the FDNPP and that the microparticles penetrated buildings. CsMPs could still be abundant at the location, with locally high Cs activity in indoor environments near to openings

Volatilization of B4_4C control rods in Fukushima Daiichi nuclear reactors during meltdown: B–Li isotopic signatures in cesium-rich microparticles

International audienceBoron carbide control rods remain in the fuel debris of the damaged reactors in the Fukushima Daiichi Nuclear Power Plant, potentially preventing re-criticality; however, the state and stability of the control rods remain unknown. Sensitive high-resolution ion microprobe analyses have revealed B–Li isotopic signatures in radioactive Cs-rich microparticles (CsMPs) that formed by volatilization and condensation of Si-oxides during the meltdowns. The CsMPs contain 1518–6733 mg kg–1 of 10+11B and 11.99–1213 mg kg–1 of 7Li. The 11B/10B (4.15–4.21) and 7Li/6Li (213−406) isotopic ratios are greater than natural abundances (~4.05 and ~12.5, respectively), indicating that 10B(n,α)7Li reactions occurred in B4C prior to the meltdowns. The total amount of B released with CsMPs was estimated to be 0.024–62 g, suggesting that essentially all B remains in reactor Units 2 and/or 3 and is enough to prevent re-criticality; however, the heterogeneous distribution of B needs to be considered during decommissioning