Methods to Quantify Reactive Chromium Vaporization from Solid Oxide Fuel Cell Interconnects

High-temperature (>600 degrees C) reactive vaporization of Cr from chromia and stainless steels in oxidizing environments is an industrially relevant phenomenon that has been and will continue to be studied extensively for decades. Recently, many experimental techniques have been developed to measure Cr vaporization from stainless steel interconnect (IC) components within solid oxide fuel cell (SOFC) systems. Many of these techniques are based on an experimental method known as the transpiration method, which is used to generate Cr vapors and subsequently collect them for quantitative analysis. However, vapor collection and analysis methods differ significantly between investigators within the community, as does the array of alloys (with and without protective surface coatings), temperatures, flow rates, and water vapor pressures used in experimentation. Therefore, the purpose of the present work is to provide an overview of experimental techniques used to quantify reactive Cr vaporization, and to compare data reported in literature on Cr vaporization from Cr2O3 and chromium containing alloys in oxidizing environments

Long-term (4 year) degradation behavior of coated stainless steel 441 used for solid oxide fuel cell interconnect applications

The present work aims to investigate the long-term stability of Ce/Co coated AISI 441 used as an interconnect material in solid oxide fuel cells (SOFC). Being a commercially available alloy the use of AISI 441 would greatly reduce the cost of SOFCs in comparison to tailor-made interconnect materials such as Crofer 22 APU. To analyze the long-term stability Ce/Co coated AISI 441 is exposed in air at 800 \ub0C for up to 38 000 h. Mass gain values are recorded continuously. After 7 000, 23 000, and 35 000 h area specific resistance (ASR) measurements are performed, and cross-sections are prepared and analyzed using scanning electron microscopy (SEM) and energy dispersive x-ray (EDX) spectroscopy. Cr-evaporation measurements are conducted on samples exposed for up to 38 000 h

Development of robust metal-supported SOFCs and stack components in EU METSAPP consortium

The potential of MS-SOFCs was demonstrated through the previous EU METSOFC project, which concluded that the development of oxidation resistant novel metal-supported solid oxide fule cell (MS-SOFC) design and stack is the requirement to advance this technology to the next level. The following EU METSAPP project has been executed with an overall aim of developing advanced metal-supported cells and stacks based on a robust, reliable and up-scalable technology. During the project, oxidation resistant nanostructured anodes based on modified SrTiO3 were developed and integrated into MS-SOFCs to enhance their robustness. In addition, the manufacturing of metal-supported cells with different geometries, scalability of the manufacturing process was demonstrated and more than 200 cells with an area of ∼150 cm2 were produced. The electrochemical performance of different cell generations was evaluated and best performance and stability combination was observed with doped SrTiO3 based anode designs. Furthermore, numerical models to understand the corrosion behavior of the MS-SOFCs were developed and validated. Finally, the cost effective concept of coated metal interconnects was developed, which resulted in 90% reduction in Cr evaporation, three times lower Cr2O3 scale thickness and increased lifetime. The possibility of assembling these cells into two radically different stack designs was demonstrated

Adsorption of CO on a Platinum (111) surface - a study within a four-component relativistic density functional approach

We report on results of a theoretical study of the adsorption process of a single carbon oxide molecule on a Platinum (111) surface. A four-component relativistic density functional method was applied to account for a proper description of the strong relativistic effects. A limited number of atoms in the framework of a cluster approach is used to describe the surface. Different adsorption sites are investigated. We found that CO is preferably adsorbed at the top position.Comment: 23 Pages with 4 figure

Risk governance in organizations

Dieses Buch dokumentiert 10 Jahre Risk-Governance-Forschung an der Universität Siegen. In 50 Beiträgen reflektieren Forscher und Praktiker Risk Governance vor dem Hintergrund ihrer eigenen Forschungen und/oder Erfahrungen und geben jeweils einen Entwicklungsimpuls für die Zukunft der Risk Governance. Das Buch zeigt die große Bandbreite und Tiefe des Forschungsgebietes auf und diskutiert Grundannahmen, Implementierungsfragen, die Rolle der Risk Governance als Transformationsmotor, ihre Wirkung in den verschiedenen betrieblichen Funktionen, Entwicklungsperspektiven und den Beitrag der Risk Governance zu einer nachhaltigen Ausrichtung von Unternehmen.This book documents 10 years of risk governance research at the University of Siegen. In 50 contributions, researchers and practitioners reflect on risk governance against the background of their own research and/or experience and provide a development impetus for the future of risk governance. The book shows the wide range and depth of the research field and discusses basic assumptions, implementation issues, the role of risk governance as transformation engine, its impact in the various operational functions, development perspectives, and the contribution of risk governance to a sustainable orientation of companies