How is the biocompatibilty of dental biomaterials evaluated?

All biomaterials used in dentistry must be evaluated for biocompatibility using screening assays to protect patient health and safety. The purpose of this review is to explain the international biocompatibility guidelines, and to explain the structure of a test program. The test program requires the structured assessment of materials into four phases; general toxicity, local tissue irritation, pre-clinical, and clinical evaluation. Different types of screening assays are available, and it is important to understand the advantages and limitations of the various types of assays that are available, so that they can be selected for appropriateness and interpreted accurately. New scientific advances in terms of the chemical properties of dental materials, tissue engineering, stem cell, genetic transfer, biomaterial, and growth factor therapies are under development. These new therapies create improved opportunities to restore and regenerate oral tissues, but they can also present new hazards to patients. Prior to their clinical use, these new technologies must be proven to be safe, and not hazardous to human health. A structured biocompatibility assessment and advice on the selection of assays are outlined to evaluate these new therapies

Clinical Performance of Viscous Glass Ionomer Cement in Posterior Cavities over Two Years

In this controlled prospective clinical study the highly viscous glass ionomer cement Ketac Molar was clinically assessed in Class I and Class II cavities. Forty-nine subjects (mean age 32.3 years) received 108 restorations placed by six operators in conventional Black I and II type cavities with undercuts after excavating primary lesions or after removing insufficient restorations. At baseline, and after 6, 12, and 24 months, restorations were assessed by two independent investigators according to modified USPHS codes and criteria. Impressions of the restorations were taken and epoxy replicas were made. Between the baseline and the 24-month recall, 51 representative samples were analyzed at 130 × magnification by use of a stereo light microscope (SLM). Recall rates were 83% after 6 months, 50% after 12 months, and 24% after 24 months. Failure rates after 24 months were 8% for Class I and 40% for Class II fillings, mainly due to bulk fracture at occlusally loaded areas (Kaplan Meier survival analysis). Significant changes over time were found for the criteria “surface roughness”, “marginal integrity”, “restoration integrity”, and “overall judgement” (P < .05; Friedman test). SLM analysis revealed statistically significant differences for the following criteria over time (baseline/6 months/12 months (in % of entire evaluable margin length); P < .05; Friedman 2-way ANOVA): perfect margin 37/19/11, negative step formation 26/49/57, gap formation 2/7/9, and overhang 24/11/8. Replicas exhibited mainly negative step formation as main finding due to apparently inferior wear resistance (P < .05). Gap formations were more frequently observed in Class II restorations than in Class I (12% versus 3% after 12 months; P < .05, Mann-Whitney-U test). The evaluated margin lengths were not statistically different (P > .05, Friedman 2-way ANOVA)

The role of angiogenesis in implant dentistry part II: the effect of bone-grafting and barrier membrane materials on angiogenesis

Background : In implant dentistry, bone substitute materials and barrier membranes are used in different treatments including guided bone regeneration (GBR), socket preservation, alveolar ridge augmentation, maxillary sinus elevation, and filling bony defects around the inserted dental implant. One of the most important factors in prognosis of treatments using these materials is the growth of new blood vessels in applied areas. Present review was performed to evaluate the effect of the bone-grafting and barrier membrane materials on angiogenesis events. Material and Methods : An electronic search was performed in PubMed, MEDLINE, and EMBASE databases via OVID using the keywords mentioned in the PubMed and MeSH headings regarding the role of angiogenesis in implant dentistry from January 2000-April 2014. Results: Of the 5,622 articles identified in our initial search results, only 33 met the inclusion criteria set for this review. Among bone substitute materials the autogenous bone-grafts, and among the barrier membranes the collagenous membranes, had the highest angiogenic potentials. Other bone-grafting materials or membranes were mostly used with pro-angiogenic factors to enhance their angiogenic properties. Conclusions: Angiogenesis is one of the key factors, which plays a critical role in success rate of GBR technique and is seriously considered in manufacturing bone-grafting and barrier membrane materials. However, there is still lack of clinical and in-vivo studies addressing the effect of angiogenesis in treatments using bone-grafting and barrier membrane materials

The role of angiogenesis in implant dentistry part I: review of titanium alloys, surface characteristics and treatments

Background: Angiogenesis plays an important role in osseointegration process by contributing to inflammatory and regenerative phases of surrounding alveolar bone. The present review evaluated the effect of titanium alloys and their surface characteristics including: surface topography (macro, micro, and nano), surface wettability/ energy, surface hydrophilicity or hydrophobicity, surface charge, and surface treatments of dental implants on angiogenesis events, which occur during osseointegration period. Material and Methods: An electronic search was performed in PubMed, MEDLINE, and EMBASE databases via OVID using the keywords mentioned in the PubMed and MeSH headings regarding the role of angiogenesis in implant dentistry from January 2000-April 2014. Results: Of the 2,691 articles identified in our initial search results, only 30 met the inclusion criteria set for this review. The hydrophilicity and topography of dental implants are the most important and effective surface characteristics in angiogenesis and osteogenesis processes. The surface treatments or modifications of dental implants are mainly directed through the enhancement of biological activity and functionalization in order to promote osteogenesis and angiogenesis, and accelerate the osseointegration procedure. Conclusions: Angiogenesis is of great importance in implant dentistry in a manner that most of the surface characteristics and treatments of dental implants are directed toward creating a more pro-angiogenic surface on dental implants. A number of studies discussed the effect of titanium alloys, dental implant surface characteristic and treatments on agiogenesis process. However, clinical trials and in-vivo studies delineating the mechanisms of dental implants, and their surface characteristics or treatments, action in angiogenesis processes are lagging

The Coronavirus Disease-19 Infection and the Oral Mucosa

BACKGROUND: The current coronavirus disease (COVID-19) pandemics induced a modification of daily life and clinical practice. Health care workers, particularly dentists and dental hygienists, have been obliged to limit their activity and to establish new operative protocols. AIM: We aimed to discuss an easy protocol for the prevention of cross-infections in dental settings. METHODS: We revised literature data about COVID-19 and oral health to establish how to work safely with dental patients. RESULTS AND CONCLUSION: A few papers are currently available about the effective prevention of COVID-19 during dental procedures. Most of the revised articles report a potential strong effectiveness of povidone-iodine and its safety for both patients and dental professionals

Effect of pH on compressive strength of some modification of mineral trioxide aggregate

Objectives: Recently, it was shown that NanoMTA improved the setting time and promoted a better hydration process which prevents washout and the dislodgment of this novel biomaterial in comparison with WTMA. This study analyzed the compressive strength of ProRoot WMTA (Dentsply), a NanoWMTA (Kamal Asgar Research Center), and Bioaggregate (Innovative Bioceramix) after its exposure to a range of environmental pH conditions during hydration. Study Design: After mixing the cements under aseptic condition and based on the manufacturers' recommendations, the cements were condensed with moderate force using plugger into 9 × 6 mm split molds. Each type of cement was then randomly divided into three groups (n=10). Specimens were exposed to environments with pH values of 4.4, 7.4, or 10.4 for 3 days. Cement pellets were compressed by using an Instron testing machine. Values were recorded and compared. Data were analyzed by using one-way analysis of variance and a post hoc Tukey's test. Results: After 3 days, the samples were solid when probed with an explorer before removing them from the molds. The greatest mean compressive strength 133.19±11.14 MPa was observed after exposure to a pH value of 10.4 for NanoWMTA. The values decreased to 111.41±8.26 MPa after exposure to a pH value of 4.4. Increasing of pH had a significant effect on the compressive strength of the groups (p<0.001). The mean compressive strength for the NanoWMTA was statistically higher than for ProRoot WMTA and Bioaggregate (p<0.001). Moreover, increasing of pH values had a significant effect on compressive strength of the experimental groups (p<0.001). Conclusion: The compressive strength of NanoWMTA was significantly higher than WMTA and Bioaggregate; the more acidic the environmental pH, the lower was the compressive strength

In vitro marginal and internal adaptation of four different base materials used to elevate proximal dentin gingival margins

There is still debate about the most appropriate restorative material category to relocate the proximal deep cervical margins, thus, this study aimed to compare the marginal and internal adaptation of four base materials used for deep margin elevation, a

Repair of bone defect by nano-modified white mineral trioxide aggregates in rabbit: a histopathological study

Background: Many researchers have tried to enhance materials functions in different aspects of science using nano-modification method, and in many cases the results have been encouraging. To evaluate the histopathological responses of the micro-/nano-size cement-type biomaterials derived from calcium silicate-based composition with addition of nano tricalcium aluminate (3CaO.Al 2 O 3 ) on bone healing response. Material and Methods: Ninety mature male rabbits were anesthetized and a bone defect was created in the right mandible. The rabbits were divided into three groups, which were in turn subdivided into five subgroups with six animals each based on the defect filled by: white mineral trioxide aggregate (WMTA), Nano-WMTA, WMTA without 3CaO.Al 2 O 3 , Nano-WMTA with 2% Nano-3CaO.Al 2 O 3 , and empty as control. Twenty, forty and sixty days postoperatively the animals were sacrificed and the right mandibles were removed for histopathological evaluations. Kruskal-Wallis test with post-hoc comparisons based on the LSMeans procedure was used for data analysis. Results: All the experimental materials provoked a moderate to severe inflammatory reaction, which significantly differed from the control group ( p < 0.05). Statistical analysis of bone formation and bone regeneration data showed significant differences between groups at 40- and 60- day intervals in all groups. Absence of 3CaO.Al 2 O 3 leads to more inflammation and foreign body reaction than other groups in all time intervals. Conclusions: Both powder nano-modification and addition of 2% Nano-3CaO.Al 2 O 3 to calcium silicate-based cement enhanced the favorable tissue response and osteogenesis properties of WMTA based materials

Determining efficacy of monitoring devices on ceramic bond to resin composite

Objectives: This paper aims to assess the effectiveness of 3D nanoroughness and 2D microroughness evaluations, by their correlation with contact angle measurements and shear bond strength test, in order to evaluate the effect of two different acids conditioning on the bonding efficacy of a leucite-based glass-ceramic to a composite resin. Study Design: Ceramic (IPS Empress) blocks were treated as follows: 1) no treatment, 2) 37% phosphoric acid (H 3 PO 4 ), 15 s, 3) 9% hydrofluoric acid (HF), 5 min. Micro- and nano-roughness were assessed with a profilometer and by means of an atomic force microscopy (AFM). Water contact angle (CA) measurements were determined to assess wettability of the ceramic surfaces with the asixymetric drop shape analysis contact diameter technique. Shear bond strength (SBS) was tested to a resin composite (Z100) with three different adhesive systems (Scotch bond Multipurpose Plus, Clearfil New Bond, ProBOND). Scanning electron microscopy (SEM) images were performed. Results: Nanoroughness values assessed in 50x50 ?m areas were higher for the HF group, these differences were not detected by profilometric analysis. HF treatment created the nano- roughest surfaces and the smallest CA (p<0.05), producing the highest SBS to the composite resin with all tested adhesive systems (p<0.05). No diffe- rences existed between the SBS produced by the adhesive systems evaluated with any of the surface treatments tested. Conclusions: Nano-roughness obtained in a 50x50 ?m scan size areas was the most reliable data to evaluate the topographical changes produced by the different acid treatments on ceramic surfaces

Using Antiseptic Mouthrinses to Reduce Sars-Cov2 Oral Viral Load

n/