Reforming Housing Policies for the Sustainability of Historic Cities in the Post-COVID Time: Insights from the Atlas World Heritage

In recent years, finding affordable housing has been a notable challenge for the residents of historic cities in Europe. This paper aims to develop a novel vision for improving housing policies in the post-COVID time to moderate the long-lasting issue of affordable housing in historic cities. The research was developed based on the findings of the Atlas World Heritage in 2019. In this project, five European Art Cities, namely Florence, Edinburgh, Bordeaux, Porto, and Santiago de Compostela, discussed their common management challenges through the shared learning method. Focusing on the case study of Florence and using a mixed-method, we collected data through the municipality of Florence, map analysis, and distribution of a questionnaire among the city residents. Then, we used inductive reasoning to explain how reforming housing policies in the post-COVID time could moderate the long-lasting issue of affordable housing in historic cities. The findings suggest that housing policies need to be supported simultaneously at both international and local levels. From the international perspective, associated cultural heritage organizations, like United Nations Educational, Scientific and Cultural Organization (UNESCO) and its advisory bodies and the World Tourism Organization (UNWTO), need to develop restriction policies that manage tourism flows in historic cities like increasing the airline taxation. At the local level, Florence needs decisive housing policies that ban the growth of illegal tourist accommodation in the city. However, the privilege of establishing new hotels can be awarded in suburban or rural areas to support sustainable tourism goals

Musculoskeletal disorders among robotic surgeons: A questionnaire analysis

Objective: Robotic surgical systems offer better workplace in order to relieve surgeons from prolonged physical efforts and improve their surgical outcomes. However, robotic surgery could produce musculoskeletal disorders due to the prolonged sitting position of the operator, the fixed position of the console viewer and the movements of the limbs. Until today, no one study has been reported concerning the association between robotics and musculoskeletal pain. The aim of this work was verify the prevalence of musculoskeletal disorders among Italian robotic surgeons. Material and methods: Between July 2011 and April 2012 a modified Standardized Nordic Questionnaire was delivered to thirty-nine Italian robotic centres. Twentytwo surgeons (56%) returned the questionnaires but only seventeen questionnaires (43.5%) were evaluable. Results: Seven surgeons (41.2%) reported musculoskeletal disorders, by since their first use of the robot which significantly persisted during the daily surgical activity (P < 0.001). Regarding the body parts affected, musculoskeletal disorders were mainly reported in the cervical spine (29.4%) and in the upper limbs (23.5%). Six surgeons (35.3%) defined the robotic console as less comfortable or neither comfortable/uncomfortable with a negative influence on their surgical procedures. Conclusions: In spite of some important limitations, our data showed musculoskeletal disorders due to posture discomfort with negative impact on daily surgical activity among robotic surgeons. These aspects could be due to the lack of ergonomic seat and to the fixed position of the console viewer which could have produced an inadequate spinal posture. The evaluation of these postural factors, in particular the development of an integrated and more ergonomic chair, could further improve the comfort feeling of the surgeon at the console and probably his surgical outcomes

Sustainable Cultural Heritage Planning and Management of Overtourism in Art Cities: Lessons from Atlas World Heritage

In recent years, there has been an increase in international tourist arrivals worldwide. In this respect, Art Cities are among the most favorable tourist destinations, as they exhibit masterpieces of art and architecture in a cultural environment. However, the so-called phenomenon of overtourism has emerged as a significant threat to the residents’ quality of life, and, consequently, the sustainability of Art Cites. This research aims to develop a management toolkit that assists site managers to control tourism flows in Art Cities and World Heritage Sites and promotes the residents’ quality of life. The research methodology was developed within the framework of the Atlas Project in 2019. In this project, five European Art Cities, including Florence, Edinburgh, Bordeaux, Porto, and Santiago de Compostela, discussed their common management challenges through the shared learning method. After developing selection criteria, the Atlas’ partners suggested a total of nine strategies as best practices for managing overtourism in Art Cities in multiple sections of accommodation policies, monitoring tactics, and promotional offerings. The Atlas project was conducted before the outbreak of the COVID-19 virus pandemic. Based on the current data, it is somehow uncertain when and how tourism activities will return to normal. The analysis of the Atlas findings also highlights some neglected dimensions in the current strategies in terms of environmental concerns, climate change impacts, crisis management, and cultural development plans, which require further research to boost the heritage planning process

Sensory profiling and consumer acceptability of new dark cocoa bars containing Tuscan autochthonous food products

A new set of cocoa bars named Toscolata® were developed containing top-quality extra virgin olive oil, dried apples cultivars, and chestnut flour. The present work has been conducted to define the sensory profile of these products through tasting by trained experts and consumers to study the acceptability, preference, and quality perception. The four sensorial profiles of the bars differed in the level of persistence, bitterness, aromaticity, acidity, astringency, and tastiness. In particular, the sour attribute could be traced to the presence of dried apple. Bars containing apple and chestnut flour obtained higher acceptance ratings, compared to those with extra virgin olive oil. The bar with chestnut flour was preferred by consumers who considered it to be sweeter due to the presence of natural sugars, which lowered the bitter sensation of cocoa. These results showed that the selection of the preferred bar by consumers was mainly based on the level of bitterness and, in particular, elderly consumers expressed a strong preference for the sweetest product. As far as we know, this is the first study comparing the results of a panel of expert tasters with that of consumers in the tasting of dark chocolate

Removal of micro-pollutants from urban wastewater by constructed wetlands with Phragmites australis and Salix matsudana

This study assessed the ability to remove micro-pollutants from wastewater using herbaceous species (Phragmites australis L.) and trees (Salix matsudana Koidz.) in constructed wetland (CW) systems. The targets of the study were as follows: (i) pharmaceuticals like diclofenac, ketoprofen, and atenolol; (ii) 4-n-NP (4-n-nonylphenol) and the ethoxylated derivatives monoethoxylated nonylphenol (NP1EO) and diethoxylated nonylphenol (NP2EO); (iii) triclosan, a bactericide used in personal care products. The 12 CW systems, filled with clay and gravel, were irrigated with wastewater from municipal area of Pagnana (Tuscany, Italy) and influent and effluent water samples analyzed periodically by gas chromatography-mass spectrometry (GC-MS/MS). The removal efficiency of CWs planted with willow and common red ranged from 8.4 up to 100%, with the higher removal efficiency for triclosan. On the contrary, the removal efficiency of NPs and NPEOs appears lower than pharmaceuticals. Data demonstrated that P. australis efficiently removed NP, diclofenac, and atenolol, while S. matsudana preferentially removed NP1EO, NP2EO, ketoprofene, and triclosan. A specific selection of plants used in CWs could be exploited for the removal of specific xenobiotics from wastewater

Cocoa Bar Antioxidant Profile Enrichment with Underutilized Apples Varieties

The impact of dried apples (Malus x domestica Borkh.) addition on improving the antioxidant characteristics of dark chocolate was evaluated. The antioxidant activity was measured through DPPH scavenging activity and showed an increase in the cocoa bar with 'Nesta' dry apple (17.3% vs. 46.8%) in comparison to cocoa mass. The 15 polyphenols analyzed by UHPLC-ESI-MS/MS indicated great variability among the apple varieties. Quercetin was detected in the highest concentrations (ranged from 753.3 to 1915.5 mu g g(-1)), while the lowest were for kaempferol 7-O-glucoside, measured only in 'Mora' and 'Nesta' cocoa bars (from 0.034 to 0.069 mu g g(-1), respectively). P-coumaric acid, trans-ferulic acid, and chlorogenic acid contribute largely to the antioxidant activity in cocoa bars. Principal component analysis shows that a cocoa bar with the addition of 'Nesta' dry apple differ from others due to its higher content of polyphenols (1614 +/- 61.8 mg gallic acid equivalents per 100 g). In conclusion, data confirm that cocoa bars with dry apples might be considered as a polyphenol-enriched food

Ultra-High performance concrete (UHPC) with polypropylene (Pp) and steel Fibres: Investigation on the high temperature behaviour

Ultra-high performance concretes (UHPC) are advanced cement-based materials characterised by superior me-chanical properties with respect to normal and high-strength concretes; however, their dense and compact matrix can facilitate the onset of spalling at high temperatures. This problem is often coped up by adding polypropylene (PP) fibres to the mix design, alone or with other types of fibres; steel fibres enhance the material’s tensile ca-pacity. The paper presents a series of tests on two UHPC types (150 and 180 N/mm2) with PP fibres (0.27% of volume) and variable content of steel fibres (0% to 1.92%), aimed at investigating the residual mechanical properties of the material after high temperature exposure. The experimental results are compared to available research on small UHPC specimens exposed to high temperatures, with dosages in PP fibres from 0.03% to 2%, and in steel fibres from 0 to 3%. The results of this research demonstrate that UHPCs need hybrid fibre rein-forcement (PP +steel) to withstand high temperatures, and that the residual strength increases after 200 ◦C exposure, at all steel fibre dosages; this is in line with literature. Available research also shows that strength loss is possible in hot conditions, as found in the present research, while PP fibres alone do not always prevent the occurrence of spalling in small UHPC sample

Implementation and Test of a LED-Based Lamp for a Lighthouse

A novel sustainable source was developed for an existing Italian lighthouse, exploiting the light emitting diode (LED) technology and the norms evolution. The research work started with the optical design of the device, while this work concerns the realization, installation, and test of the new LED lamp. The lamp recombines multiple separated LEDs, realizing a quasipunctual localized source. After installation in the lighthouse, specific photometric tests verified that the proposed power-saving source satisfied the illumination requirements of the marine signaling norms. The advantages of the LED-based lamp are reduced energy consumption, enhanced efficiency, longer life, decreased faults, slower aging, and lower maintenance costs. The obtained LED signalling device is more durable and reliable. In the future the application of these power-saving long-life sources could be extended to other maritime signaling devices or to other traffic signs

Poly(Ethylene glycol) diacrylate hydrogel with silver nanoclusters for water Pb(II) ions filtering

Poly(ethylene glycol) diacrylate (PEGDA) hydrogels modified with luminescent silver nanoclusters (AgNCs) are synthesized by a photo-crosslinking process. The hybrid material thus obtained is employed to filter Pb(II) polluted water. Under the best conditions, the nanocomposite is able to remove up to 80–90% of lead contaminant, depending on the filter composition. The experimental results indicate that the adsorption process of Pb(II) onto the modified filter can be well modeled using the Freundlich isotherm, thus revealing that the chemisorption is the driving process of Pb(II) adsorption. In addition, the parameter n in the Freundlich model suggests that the adsorption process of Pb(II) ions in the modified hydrogel is favored. Based on the obtained remarkable contaminant uptake capacity and the overall low cost, this hybrid system appears to be a promising sorbent material for the removal of Pb(II) ions from aqueous media