Scalable production of graphene inks via wet-jet milling exfoliation for screen-printed micro-supercapacitors

The miniaturization of energy storage units is pivotal for the development of next-generation portable electronic devices. Micro-supercapacitors (MSCs) hold a great potential to work as on-chip micro-power sources and energy storage units complementing batteries and energy harvester systems. The scalable production of supercapacitor materials with cost-effective and high-throughput processing methods is crucial for the widespread application of MSCs. Here, we report wet-jet milling exfoliation of graphite to scale-up the production of graphene as supercapacitor material. The formulation of aqueous/alcohol-based graphene inks allows metal-free, flexible MSCs to be screen-printed. These MSCs exhibit areal capacitance (Careal) values up to 1.324 mF cm-2 (5.296 mF cm-2 for a single electrode), corresponding to an outstanding volumetric capacitance (Cvol) of 0.490 F cm-3 (1.961 F cm-3 for a single electrode). The screen-printed MSCs can operate up to power density above 20 mW cm-2 at energy density of 0.064 uWh cm-2. The devices exhibit excellent cycling stability over charge-discharge cycling (10000 cycles), bending cycling (100 cycles at bending radius of 1 cm) and folding (up to angles of 180{\deg}). Moreover, ethylene vinyl acetate-encapsulated MSCs retain their electrochemical properties after a home-laundry cycle, providing waterproof and washable properties for prospective application in wearable electronics

The Intention to Purchase Recycled Products: Towards an Integrative Theoretical Framework

The growing interest of the scientific literature regarding purchase behavior, circular economy and new business models has generated the need, as well as the opportunity, for a comprehensive review and categorization of the state of the existing research carried out so far. The present study aims at reconciling the wide but fragmented literature dealing with the purchase intention of recycled products. An integrative theoretical framework, able to combine several constructs, perspectives, and theories discussed to date on the topic, is proposed. Such framework represents a further step toward a comprehensive understanding of behavioral theories and constructs, which need to be understood to design effective business models for the circular economy. This effort could be highly valuable both for scholars interested in the topic—as the integrative framework could assist them in theorizing additional effects—and for firms’ managers—who can understand, more in depth, the drivers of the consumers’ purchasing process and act accordingly

Tactile multisensing on flexible aluminum nitride

The integration of a polycrystalline material such as aluminum nitride (AlN) on a flexible substrate allows the realization of elastic tactile sensors showing both piezoelectricity and significant capacitive variation under normal stress. The application of a normal stress on AlN generates deformation of the flexible substrate on which AlN is grown, which results in strain gradient of the polycrystalline layer. The strain gradient is responsible for an additional polarization described in the literature as the flexoelectric effect, leading to an enhancement of the transduction properties of the material. The flexible AlN is synthesized by sputtering deposition on kapton HN (poly 4,4′- oxydiphenyl pyromellitimide) in a highly oriented crystal structure. High orientation is demonstrated by X-ray diffraction spectra (FWHM = 0.55° of AlN (0002)) and HRTEM. The piezoelectric coefficient d 33 and stress sensitive capacitance are 4.7 ± 0.5 pm V -1 and 4 × 10 -3 pF kPa -1, respectively. The parallel plate capacitors realized for tactile sensing present a typical dome shape, very elastic under applied stress and sensitive in the pressure range of interest for robotic applications (10 kPa to 1 MPa). The flexibility of the device finalized for tactile applications is assessed by measuring the sensor capacitance before and after shaping the sensing foil on curved surfaces for 1 hour. Bending does not affect sensors operation, which exhibits an electrical Q factor as high as 210, regardless of the bending, and a maximum capacitance shift of 0.02%

HERG1 positivity and Glut-1 negativity identifies high-risk TNM stage I and II colorectal cancer patients, regardless of adjuvant chemotherapy

BACKGROUND: The identification of early-stage colorectal cancer (CRC) with high risk of progression is one major clinical challenge, mainly due to lack of validated biomarkers. The aims of the present study were to analyze the prognostic impact of three molecular markers belonging to the ion channels and transporters family: the ether-à-go-go-related gene 1 (hERG1) and the calcium-activated KCa3.1 potassium channels, as well as the glucose transporter 1 (Glut-1); and to define the impact of adjuvant chemotherapy in conjunction with the abovementioned biomarkers, in a cohort of radically resected stage I–III CRC patients. PATIENTS AND METHODS: The expressions of hERG1, KCa3.1, and Glut-1 were tested by immunohistochemistry on 162 surgical samples of nonmetastatic, stage I–III CRC patients. The median follow-up was 32 months. The association between biological markers, clinicopathological features, and survival outcomes was investigated by evaluating both disease-free survival and overall survival. RESULTS: Although no prognostic valence emerged for KCa3.1, evidence of a negative impact of hERG1 expression on survival outcomes was provided. On the contrary, Glut-1 expression had a positive impact. According to the results of the multivariate analysis, patients were stratified in four risk groups, based on TNM stage and hERG1/Glut-1 expression. After adjusting for adjuvant therapy, stage I and II, Glut-1-negative, and hERG1-positive patients showed the worst survival experience. CONCLUSION: This study strongly indicates that the combination of hERG1 positivity and Glut-1 negativity behaves as a prognostic biomarker in radically resected CRC patients. This combination identifies a group of stage I and II CRC patients with a bad prognosis, even worse than that of stage III patients, regardless of adjuvant therapy accomplishment

Recalcitrant compounds removal in raw leachate and synthetic effluents using the white-rot fungus Bjerkandera adusta

Recalcitrant compounds limit the efficiency of conventional biological processes for wastewater treatment, representing one of the major issues in the field. This study focused on the treatment of three effluents with White-Rot-Fungus (WRF) Bjerkandera adusta MUT 2295 in batch tests, with biomass cultivated in attached form on polyurethane foam cubes (PUFs) to test its efficiency in the removal of the target effluents' recalcitrant fraction. Treatment efficiency of B. adusta was evaluated on landfill leachate (Canada) and two solutions containing synthetic recalcitrant compounds, which were prepared with tannic and humic acid. Chemical Oxygen Demand (COD) and color removal, the production of manganese peroxidases, and the consumption of a co-substrate (glucose) were monitored during the experiment. Biological Oxygen Demand (BOD5) and fungal dry weight were measured at the beginning and at the end of the experiment. After co-substrate addition, effluent COD was 2300 ± 85, 2545 ± 84, and 2580 ± 95 (mg/L) in raw leachate and tannic and humic acids, respectively. COD removal of 48%, 61%, and 48% was obtained in raw leachate and in the synthetic effluents containing tannic and humic acids, respectively. Color removal of 49%, 25%, and 42% was detected in raw leachate and in tannic and humic acid solutions, respectively. COD and color removals were associated with the increase of fungal dry weight, which was observed in all the trials. These results encourage the use of the selected fungal strain to remove tannic acid, while further investigations are required to optimize leachate and humic acid bioremediation

Effects of an intensive inpatient rehabilitation program in elderly patients with obesity

Objective: The aim of this study was to assess the short-term effectiveness of an intensive inpatient multidimensional rehabilitation program (MRP), including diet, exercise, and behavioral therapy, in elderly patients with severe obesity. Methods: Forty-four elderly patients (old; age 69.3 \ub1 3.5 years, BMI 41.9 \ub1 14.9) were analyzed against 215 younger patients (young; age 48.2 \ub1 18.5 years, BMI 43.9 \ub1 9.4), who were used as controls. All patients underwent MRP, based on group therapy guided by a multidisciplinary team (physicians, dietitians, exercise trainers, psychologists). We evaluated changes in anthropometry, cardiovascular risk factors, physical fitness, quality of life, and eating behavior. Results: After 3 weeks of MRP, we observed a reduction in body weight (old -3.8%, young -4.3%), BMI (old -3.9%, young -4.4%), waist circumference (old -3.4%, young -4.1%), total cholesterol (old -14.0%, young -15.0%), and fasting glucose (old -8.3%, young -8.1%), as well as improved performance in the Six-Minute-Walk Test (old +28.7%, young +15.3%), chair-stand test (old +24.8%, young +26.9%), and arm-curl test (old +15.2%, young +27.3%). Significant improvement was registered in all other analyzed domains. Conclusion: Our 3-week MRP provided significant clinical and functional improvement, which was similar between elderly and younger patients with severe obesity. In the long-term, this may be translated into better quality of life, through better management of obesity-associated morbidities and reduced frailty

Thermo-mechanical response FEM simulation of ceramic refractories undergoing severe temperature variations

T. K Papathanasiou and F. Dal Corso gratefully acknowledge support from the European Union FP7 project “Mechanics of refractory materials at high–temperature for advanced industrial technologies” under contract number PIAPP–GA–2013–609758. A. Piccolroaz would like to acknowledge financial support from the European Union‟s Seventh Framework Programme FP7/2007-2013/ under REA grant agreement number PITN-GA-2013-606878-CERMAT2