Curing kinetics and effects of fibre surface treatment and curing parameters on the interfacial and tensile properties of hemp/epoxy composites

The curing kinetics of neat epoxy (NE) and hemp fibre/epoxy composites was studied and assessed using two dynamic models (the Kissinger and Flynn-Wall-Ozawa Models) and an isothermal model (the Autocatalytic Model) which was generally supported by the experimental data obtained from dynamic and isothermal differential scanning calorimetry (DSC) scans. The activation energies for the curing of composites exhibited lower values compared to curing of NE which is believed to be due to higher nucleophilic activity of the amine groups of the curing agent in the presence of fibres. The highest tensile strength, σ was obtained with composites produced with an epoxy to curing agent ratio of 1:1 and the highest Young's modulus, E was obtained with an epoxy to curing agent ratio of 1:1.2. Alkali treated hemp fibre/epoxy (ATFE) composites were found to have higher σ and E values compared to those for untreated hemp fibre/epoxy (UTFE) composites which was consistent with the trend for interfacial shear strength (IFSS) values. Composites σ and E were found to be higher for a processing temperature of 70°C than for 25°C for both UTFE and ATFE composites, but were found to decrease as the curing temperature was increased further to 120°C

Dielectric tuning and coupling of whispering gallery modes using an anisotropic prism

Optical whispering gallery mode (WGM) resonators are a powerful and versatile tool used in many branches of science. Fine tuning of the central frequency and line width of individual resonances is however desirable in a number of applications including frequency conversion, optical communications and efficient light-matter coupling. To this end we present a detailed theoretical analysis of dielectric tuning of WGMs supported in axisymmetric resonators. Using the Bethe-Schwinger equation and adopting an angular spectrum field representation we study the resonance shift and mode broadening of high $Q$ WGMs when a planar dielectric substrate is brought close to the resonator. Particular focus is given to use of a uniaxial substrate with an arbitrarily aligned optic axis. Competing red and blue resonance shifts ($\sim 30$ MHz), deriving from generation of a near field material polarisation and back action from the radiation continuum respectively, are found. Anomalous resonance shifts can hence be observed depending on the substrate material, whereas mode broadening on the order of $\sim 50$ MHz can also be simply realised. Furthermore, polarisation selective coupling with extinction ratios of $> 10^4$ can be achieved when the resonator and substrate are of the same composition and their optic axes are chosen correctly. Double refraction and properties of out-coupled beams are also discussed

Long range orbital error estimation for applications satellites

A method of optimum orbital averaging was employed to study the long range accuracy potential of polar orbiting applications satellites. This approach involved the determination of the boundary conditions of one set of differential equations of motion by adjusting the initial conditions in a least square sense with the use of data generated by another set of differential equations of motion

Influence of accelerated ageing on the physico-mechanical properties of alkali-treated industrial hemp fibre reinforced poly(lactic acid) (PLA) composites

30 wt% aligned untreated long hemp fibre/PLA (AUL) and aligned alkali treated long hemp fibre/PLA (AAL) composites were produced by film stacking and subjected to accelerated ageing. Accelerated ageing was carried out using UV irradiation and water spray at 50 °C for four different time intervals (250, 500, 750 and 1000 h). After accelerated ageing, tensile strength (TS), flexural strength, Young's modulus (YM), flexural modulus and mode I fracture toughness (KIc) were found to decrease and impact strength (IS) was found to increase for both AUL and AAL composites. AUL composites had greatest overall reduction in mechanical properties than that for AAL composites upon exposure to accelerated ageing environment. FTIR analysis and crystallinity contents of the accelerated aged composites support the results of the deterioration of mechanical properties upon exposure to accelerated ageing environment

Reflection of light and heavy holes from a linear potential barrier

In this paper we study reflection of holes in direct-band semiconductors from the linear potential barrier. It is shown that light-heavy hole transformation matrix is universal. It depends only on a dimensionless product of the light hole longitudinal momentum and the characteristic length determined by the slope of the potential and doesn't depend on the ratio of light and heavy hole masses, provided this ratio is small. It is shown that the transformation coefficient goes to zero both in the limit of small and large longitudinal momenta, however the phase of a reflected hole is different in these limits. An approximate analytical expression for the light-heavy hole transformation coefficient is found.Comment: 6 pages, 2 figure

First-principles envelope-function theory for lattice-matched semiconductor heterostructures

In this paper a multi-band envelope-function Hamiltonian for lattice-matched semiconductor heterostructures is derived from first-principles norm-conserving pseudopotentials. The theory is applicable to isovalent or heterovalent heterostructures with macroscopically neutral interfaces and no spontaneous bulk polarization. The key assumption -- proved in earlier numerical studies -- is that the heterostructure can be treated as a weak perturbation with respect to some periodic reference crystal, with the nonlinear response small in comparison to the linear response. Quadratic response theory is then used in conjunction with k.p perturbation theory to develop a multi-band effective-mass Hamiltonian (for slowly varying envelope functions) in which all interface band-mixing effects are determined by the linear response. To within terms of the same order as the position dependence of the effective mass, the quadratic response contributes only a bulk band offset term and an interface dipole term, both of which are diagonal in the effective-mass Hamiltonian. Long-range multipole Coulomb fields arise in quantum wires or dots, but have no qualitative effect in two-dimensional systems beyond a dipole contribution to the band offsets.Comment: 25 pages, no figures, RevTeX4; v3: final published versio

Influence of molecular weight on the phase behavior and structure formation of branched side-chain hairy-rod polyfluorene in bulk phase.

We report on an experimental study of the self-organization and phase behavior of hairy-rod π -conjugated branched side-chain polyfluorene, poly[9,9-bis(2-ethylhexyl)-fluorene-2,7-diyl]—i.e., poly[2,7–(9,9–bis(2–ethylhexyl)fluorene] (PF2∕6) —as a function of molecular weight (Mn) . The results have been compared to those of phenomenological theory. Samples for which Mn=3–147 kg∕mol were used. First, the stiffness of PF2∕6 , the assumption of the theory, has been probed by small-angle neutron scattering in solution. Thermogravimetry has been used to show that PF2∕6 is thermally stable over the conditions studied. Second, the existence of nematic and hexagonal phases has been phenomenologically identified for lower and higher Mn (LMW, Mn<Mn* and HMW, Mn>Mn* ) regimes, respectively, based on free-energy argument of nematic and hexagonal hairy rods and found to correspond to the experimental x-ray diffraction (XRD) results for PF2∕6 . By using the lattice parameters of PF2∕6 as an experimental input, the nematic-hexagonal transition has been predicted in the vicinity of glassification temperature (Tg) of PF2∕6 . Then, by taking the orientation parts of the free energies into account the nematic-hexagonal transition has been calculated as a function of temperature and Mn and a phase diagram has been formed. Below Tg of 80 °C only (frozen) nematic phase is observed for Mn<Mn*=104 g∕mol and crystalline hexagonal phase for Mn>Mn* . The nematic-hexagonal transition upon heating is observed for the HMW regime depending weakly on Mn , being at 140–165 °C for Mn>Mn* . Third, the phase behavior and structure formation as a function of Mn have been probed using powder and fiber XRD and differential scanning calorimetry and reasonable semiquantitative agreement with theory has been found for Mn≥3 kg∕mol . Fourth, structural characteristics are widely discussed. The nematic phase of LMW materials has been observed to be denser than high-temperature nematic phase of HMW compounds. The hexagonal phase has been found to be paracrystalline in the (ab0) plane but a genuine crystal meridionally. We also find that all these materials including the shortest 10-mer possess the formerly observed rigid five-helix hairy-rod molecular structure

Lattice model theory of the equation of state covering the gas, liquid, and solid phases

The three stable states of matter and the corresponding phase transitions were obtained with a single model. Patterned after Lennard-Jones and Devonshires's theory, a simple cubic lattice model containing two fcc sublattices (alpha and beta) is adopted. The interatomic potential is taken to be the Lennard-Jones (6-12) potential. Employing the cluster variation method, the Weiss and the pair approximations on the lattice gas failed to give the correct phase diagrams. Hybrid approximations were devised to describe the lattice term in the free energy. A lattice vibration term corresponding to a free volume correction is included semi-phenomenologically. The combinations of the lattice part and the free volume part yield the three states and the proper phase diagrams. To determine the coexistence regions, the equalities of the pressure and Gibbs free energy per molecule of the coexisting phases were utilized. The ordered branch of the free energy gives rise to the solid phase while the disordered branch yields the gas and liquid phases. It is observed that the triple point and the critical point quantities, the phase diagrams and the coexistence regions plotted are in good agreement with the experimental values and graphs for argon

eleanor: An open-source tool for extracting light curves from the TESS Full-Frame Images

During its two year prime mission the Transiting Exoplanet Survey Satellite (TESS) will perform a time-series photometric survey covering over 80% of the sky. This survey comprises observations of 26 24 x 96 degree sectors that are each monitored continuously for approximately 27 days. The main goal of TESS is to find transiting planets around 200,000 pre-selected stars for which fixed aperture photometry is recorded every two minutes. However, TESS is also recording and delivering Full-Frame Images (FFIs) of each detector at a 30 minute cadence. We have created an open-source tool, eleanor, to produce light curves for objects in the TESS FFIs. Here, we describe the methods used in eleanor to produce light curves that are optimized for planet searches. The tool performs background subtraction, aperture and PSF photometry, decorrelation of instrument systematics, and cotrending using principal component analysis. We recover known transiting exoplanets in the FFIs to validate the pipeline and perform a limited search for new planet candidates in Sector 1. Our tests indicate that eleanor produces light curves with significantly less scatter than other tools that have been used in the literature. Cadence-stacked images, and raw and detrended eleanor light curves for each analyzed star will be hosted on MAST, with planet candidates on ExoFOP-TESS as Community TESS Objects of Interest (CTOIs). This work confirms the promise that the TESS FFIs will enable the detection of thousands of new exoplanets and a broad range of time domain astrophysics.Comment: 21 pages, 13 figures, 2 tables, Accepted to PAS