UV Photoelectron Spectroscopy of Aqueous Solutions

Knowledge of the electronic structure of an aqueous solution is a prerequisite to understanding its chemical and biological reactivity and its response to light. One of the most direct ways of determining electronic structure is to use photoelectron spectroscopy to measure electron binding energies. Initially, photoelectron spectroscopy was restricted to the gas or solid phases due to the requirement for high vacuum to minimize inelastic scattering of the emitted electrons. The introduction of liquid-jets and their combination with intense X-ray sources at synchrotrons in the late 1990s expanded the scope of photoelectron spectroscopy to include liquids. Liquid-jet photoelectron spectroscopy is now an active research field involving a growing number of research groups. A limitation of X-ray photoelectron spectroscopy of aqueous solutions is the requirement to use solutes with reasonably high concentrations in order to obtain photoelectron spectra with adequate signal-to-noise after subtracting the spectrum of water. This has excluded most studies of organic molecules, which tend to be only weakly soluble. A solution to this problem is to use resonance-enhanced photoelectron spectroscopy with ultraviolet (UV) light pulses (hν ≲ 6 eV). However, the development of UV liquid-jet photoelectron spectroscopy has been hampered by a lack of quantitative understanding of inelastic scattering of low kinetic energy electrons (≲5 eV) and the impact on spectral lineshapes and positions.In this Account, we describe the key steps involved in the measurement of UV photoelectron spectra of aqueous solutions: photoionization/detachment, electron transport of low kinetic energy electrons through the conduction band, transmission through the water-vacuum interface, and transport through the spectrometer. We also explain the steps we take to record accurate UV photoelectron spectra of liquids with excellent signal-to-noise. We then describe how we have combined Monte Carlo simulations of electron scattering and spectral inversion with molecular dynamics simulations of depth profiles of organic solutes in aqueous solution to develop an efficient and widely applicable method for retrieving true UV photoelectron spectra of aqueous solutions. The huge potential of our experimental and spectral retrieval methods is illustrated using three examples. The first is a measurement of the vertical detachment energy of the green fluorescent protein chromophore, a sparingly soluble organic anion whose electronic structure underpins its fluorescence and photooxidation properties. The second is a measurement of the vertical ionization energy of liquid water, which has been the subject of discussion since the first X-ray photoelectron spectroscopy measurement in 1997. The third is a UV photoelectron spectroscopy study of the vertical ionization energy of aqueous phenol which demonstrates the possibility of retrieving true photoelectron spectra from measurements with contributions from components with different concentration profiles

Accurate Vertical Ionization Energy of Water and Retrieval of True Ultraviolet Photoelectron Spectra of Aqueous Solutions

Ultraviolet (UV) photoelectron spectroscopy provides a direct way of measuring valence electronic structure; however, its application to aqueous solutions has been hampered by a lack of quantitative understanding of how inelastic scattering of low-energy (<5 eV) electrons in liquid water distorts the measured electron kinetic energy distributions. Here, we present an efficient and widely applicable method for retrieving true UV photoelectron spectra of aqueous solutions. Our method combines Monte Carlo simulations of electron scattering and spectral inversion, with molecular dynamics simulations of depth profiles of organic solutes in aqueous solution. Its application is demonstrated for both liquid water, and aqueous solutions of phenol and phenolate, which are ubiquitous biologically relevant structural motifs

On the multiphoton ionisation photoelectron spectra of phenol

The phenol molecule is a prototype for non-adiabatic dynamics and the excited-state photochemistry of biomolecules. In this article, we report a joint theoretical and experimental investigation on the resonance enhanced multiphoton ionisation photoelectron (REMPI) spectra of the two lowest ionisation bands of phenol. The focus is on the theoretical interpretation of the measured spectra using quantum dynamics simulations. These were performed by numerically solving the time-dependent Schrödinger equation using the multi-layer variant of the multiconfiguration time-dependent Hartree algorithm together with a vibronic coupling Hamiltonian model. The ionising laser pulse is modelled explicitly within the ionisation continuum model to simulate experimental femtosecond 1+1 REMPI photoelectron spectra. These measured spectra are sensitive to very short lived electronically excited states, providing a rigorous benchmark for our theoretical methods. The match between experiment and theory allows for an interpretation of the features of the spectra at different wavelengths and shows that there are features due to both 'direct' and 'indirect' ionisation, resulting from non-resonant and resonant excitation by the pump pulse

Single-crystal organometallic perovskite optical fibers

Semiconductors in their optical-fiber forms are desirable. Single-crystal organometallic halide perovskites have attractive optoelectronic properties and therefore are suitable fiber-optic platforms. However, single-crystal organometallic perovskite optical fibers have not been reported before due to the challenge of one-directional single-crystal growth in solution. Here, we report a solution-processed approach to continuously grow single-crystal organometallic perovskite optical fibers with controllable diameters and lengths. For single-crystal MAPbBr3 (MA = CH3NH3+) perovskite optical fiber made using our method, it demonstrates low transmission losses (<0.7 dB/cm), mechanical flexibilities (a bending radius down to 3.5 mm), and mechanical deformation-tunable photoluminescence in organometallic perovskites. Moreover, the light confinement provided by our organometallic perovskite optical fibers leads to three-photon absorption (3PA), in contrast with 2PA in bulk single crystals under the same experimental conditions. The single-crystal organometallic perovskite optical fibers have the potential in future optoelectronic applications

Zero Threshold for Water Adsorption on MAPbBr3

Hybrid organic-inorganic perovskites (HOIPs) have shown great promise in a wide range of optoelectronic applications. However, this performance is inhibited by the sensitivity of HOIPs to various environmental factors, particularly high levels of relative humidity. This study uses X-ray photoelectron spectroscopy (XPS) to determine that there is essentially no threshold to water adsorption on the in situ cleaved MAPbBr3 (001) single crystal surface. Using scanning tunneling microscopy (STM), it shows that the initial surface restructuring upon exposure to water vapor occurs in isolated regions, which grow in area with increasing exposure, providing insight into the initial degradation mechanism of HOIPs. The electronic structure evolution of the surface was also monitored via ultraviolet photoemission spectroscopy (UPS), evidencing an increased bandgap state density following water vapor exposure, which is attributed to surface defect formation due to lattice swelling. This study will help to inform the surface engineering and designs of future perovskite-based optoelectronic devices

The Effect of Conjugation on the Competition Between Internal Conversion and Electron Detachment: A Comparison Between Green Fluorescent and Red Kaede Protein Chromophores

Kaede, an analogue of green fluorescent protein (GFP), is a green-to-red photoconvertible fluorescent protein used as an in vivo ‘optical highlighter’ in bioimaging. The fluorescence quantum yield of the red Kaede protein is lower than that of GFP, suggesting that increasing the conjugation modifies the electronic relaxation pathway. Using a combination of anion photoelectron spectroscopy and electronic structure calculations, we find that the isolated red Kaede protein chromophore in the gas phase is deprotonated at the imidazole ring, unlike the GFP chromophore that is deprotonated at the phenol ring. We find evidence of an efficient electronic relaxation pathway from higher lying electronically excited states to the S1 state of the red Kaede chromophore that is not accessible in the GFP chromophore. Rapid autodetachment from high lying vibrational states of S1 is found to compete efficiently with internal conversion to the ground electronic state

Intramolecular thiomaleimide [2+2] photocycloadditions: stereoselective control for disulfide stapling and observation of excited state intermediates by transient absorption spectroscopy

Thiomaleimides undergo efficient intermolecular [2 + 2] photocycloaddition reactions and offer applications from photochemical peptide stapling to polymer crosslinking; however, the reactions are limited to the formation of the exo head-to-head isomers. Herein, we present an intramolecular variation which completely reverses the stereochemical outcome of this photoreaction, quantitatively generating endo adducts which minimise the structural disturbance of the disulfide staple and afford a 10-fold increase in quantum yield. We demonstrate the application of this reaction on a protein scaffold, using light to confer thiol stability to an antibody fragment conjugate. To understand more about this intriguing class of [2 + 2] photocycloadditions, we have used transient absorption spectroscopy (electronic and vibrational) to study the excited states involved. The initially formed S2 (π1π*) excited state is observed to decay to the S1 (n1π*) state before intersystem crossing to a triplet state. An accelerated intramolecular C–C bond formation provides evidence to explain the increased efficiency of the reaction, and the impact of the various excited states on the carbonyl vibrational modes is discussed

Liquid-microjet photoelectron spectroscopy of the green fluorescent protein chromophore

Green fluorescent protein (GFP), the most widely used fluorescent protein for in vivo monitoring of biological processes, is known to undergo photooxidation reactions. However, the most fundamental property underpinning photooxidation, the electron detachment energy, has only been measured for the deprotonated GFP chromophore in the gas phase. Here, we use multiphoton ultraviolet photoelectron spectroscopy in a liquid-microjet and high-level quantum chemistry calculations to determine the electron detachment energy of the GFP chromophore in aqueous solution. The aqueous environment is found to raise the detachment energy by around 4 eV compared to the gas phase, similar to calculations of the chromophore in its native protein environment. In most cases, electron detachment is found to occur resonantly through electronically excited states of the chromophore, highlighting their importance in photo-induced electron transfer processes in the condensed phase. Our results suggest that the photooxidation properties of the GFP chromophore in an aqueous environment will be similar to those in the protein

Polaron-adsorbate coupling at the TiO2(110)-carboxylate interface

Understanding how adsorbates influence polaron behavior is of fundamental importance in describing the catalytic properties of TiO2. Carboxylic acids adsorb readily at TiO2 surfaces, yet their influence on polaronic states is unknown. Using UV photoemission spectroscopy (UPS), two-photon photoemission spectroscopy (2PPE), and density functional theory (DFT) we show that dissociative adsorption of formic and acetic acids has profound, yet different, effects on the surface density, crystal field, and photoexcitation of polarons in rutile TiO2(110). We also show that these variations are governed by the contrasting electrostatic properties of the acids, which impacts the extent of polaron−adsorbate coupling. The density of polarons in the surface region increases more in formate-terminated TiO2(110) relative to acetate. Consequently, increased coupling gives rise to new photoexcitation channels via states 3.83 eV above the Fermi level. The onset of this process is 3.45 eV, likely adding to the catalytic photoyield

Effect of the duration of antimicrobial exposure on the development of antimicrobial resistance (AMR) for macrolide antibiotics: protocol for a systematic review with a network meta-analysis

THD is funded by the Commonwealth Scholarship Commission and the Helse Nord RHF. This review is part of his PhD work at LSHTM. ELC is funded by a Wellcome Trust Senior Research Fellowship in Clinical Science: WT200901. HRS is supported by the Medical Research Council [MR/R008345/1].Background: Antimicrobial resistance generates a huge health and economic burden and has the potential to become the leading cause of death globally, but its underlying drivers are yet to be fully described. The association between a microbe’s exposure to antimicrobials and subsequent development of, or selection for, resistance is well documented, as are the exacerbating microbial and human factors. However, the nature and extent of this risk, and how it varies by antimicrobial class and duration of treatment, is poorly defined. The goal of our systematic review and network meta-analysis is to determine the relationship between the duration of antimicrobial exposure and selection for resistance. We will use macrolides as the antimicrobial class of interest and Streptococcus pneumoniae carriage as an indicator organism. Our secondary outcomes include duration of symptoms, risk of treatment failure and recurrence, and descriptions of resistance mechanisms. Methods:  We will conduct a systematic review, selecting studies if they are published randomised controlled trials (RCTs) which report the relationship between taking a macrolide for any indication and incidence of resistant Streptococcus pneumoniae in patients of any age group. We will use a predefined search strategy to identify studies meeting these eligibility criteria in MEDLINE, Embase, Global Health and the Cochrane Central Register of RCTs. Two authors will independently screen titles and abstracts, review the full texts and undertake data extraction. We will use the Cochrane Collaboration’s tool to assess the quality of included RCTs. If feasible, we will perform pair-wise meta-analysis modelling to determine the relationship between the duration of macrolide treatment and development of macrolide resistant Streptococcus pneumoniae. If the identified studies meet the assumptions for a network meta-analysis (NMA), we will additionally model this relationship using indirect comparisons. Our protocol utilises reporting guidance by Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) and the extensions for protocols (PRISMA-P) and network meta-analyses (PRISMA for NMA). Our review will also report to these standards. Discussion:  Establishing the relationship between the duration of antimicrobial exposure and development of, or selection for, resistance will inform the design of antimicrobial prescriptions, treatment guidelines and the behaviour of both physicians and patients. This work will therefore be a strong contribution towards the full realisation of current antimicrobial resistance stewardship strategies.Publisher PDFPeer reviewe