Positron annihilation spectroscopy: a new frontier for understanding nanoparticle loaded polymer brushes

Nanoparticle-loaded polymer brushes are powerful tools for the development of innovative devices. However, their characterization is challenging and arrays of different techniques are typically required to gain sufficient insight. Here we demonstrate for the first time the suitability of positron annihilation spectroscopy (PAS) to investigate, with unprecedented detail and without making the least damage to samples, the physico-chemical changes experienced by pHresponsive polymer brushes after protonation and after loading of silver nanoparticles. One of the most important findings is the depth profiling of silver nanoparticles inside the brushes. These results open up a completely new way to understand the structure and behavior of such complex systems

Gas transport and free volume study in polyethylene based epoxy membranes

The mechanism of gas diffusivity in amine modified epoxy membranes is studied in the frame of free volume properties. Epoxy membranes with two different crosslinking densities and composite with Graphene nanoplatelets were prepared by solvent casting method. The free volume parameters measured by Positron Annihilation Spectroscopy (PAS) show inverse correlation with crosslinking density of the samples. The gas permeability and diffusivity for CO2 have been studied by gas permeation measurements. The study reveals that the gas permeability and diffusivity change significantly as a function of crosslinking density, free volumes and structural relaxations of the molecular chains

Spray-combustion synthesis: Efficient solution route to high-performance oxide transistors

Metal-oxide (MO) semiconductors have emerged as enabling materials for next generation thin-film electronics owing to their high carrier mobilities, even in the amorphous state, large-area uniformity, low cost, and optical transparency, which are applicable to flat-panel displays, flexible circuitry, and photovoltaic cells. Impressive progress in solution-processed MO electronics has been achieved using methodologies such as sol gel, deep-UV irradiation, preformed nanostructures, and combustion synthesis. Nevertheless, because of incomplete lattice condensation and film densification, high-quality solution-processed MO films having technologically relevant thicknesses achievable in a single step have yet to be shown. Here, we report a low-temperature, thickness-controlled coating process to create high-performance, solution-processed MO electronics: spray-combustion synthesis (SCS). We also report for the first time, to our knowledge, indium-gallium-zinc-oxide (IGZO) transistors having densification, nanoporosity, electron mobility, trap densities, bias stability, and film transport approaching those of sputtered films and compatible with conventional fabrication (FAB) operations

A Moiré Deflectometer for Antimatter

The precise measurement of forces is one way to obtain deep insight into the fundamental interactions present in nature. In the context of neutral antimatter, the gravitational interaction is of high interest, potentially revealing new forces that violate the weak equivalence principle. Here we report on a successful extension of a tool from atom optics - the moirè deflectometer - for a measurement of the acceleration of slow antiprotons. The setup consists of two identical transmission gratings and a spatially resolving emulsion detector for antiproton annihilations. Absolute referencing of the observed antimatter pattern with a photon pattern experiencing no deflection allows the direct inference of forces present. The concept is also straightforwardly applicable to antihydrogen measurements as pursued by the AEgIS collaboration. The combination of these very different techniques from high energy and atomic physics opens a very promising route to the direct detection of the gravitational acceleration of neutral antimatter

AEgIS Experiment: Measuring the Acceleration g of the Earth's Gravitational Field on Antihydrogen Beam

The AEgIS experiment [1] aims at directly measuring the gravitational acceleration g on a beam of cold antihydrogen (H) to a precision of 1%, performing the first test with antimatter of the (WEP) Weak Equivalence Principle. The experimental apparatus is sited at the Antiproton Decelerator (AD) at CERN, Geneva, Switzerland. After production by mixing of antiprotons with Rydberg state positronium atoms (Ps), the atoms will be driven to fly horizontally with a velocity of a few 100 ms−1 for a path length of about 1 meter. The small deflection, few tens of μm, will be measured using two material gratings (of period ∼ 80 μm) coupled to a position-sensitive detector working as a moiré deflectometer similarly to what has been done with matter atoms [2]. The shadow pattern produced by the beam will then be detected by reconstructing the annihilation points with a spatial resolution (∼ 2 μm) of each antiatom at the end of the flight path by the sensitive-position detector. During 2012 the experimental apparatus has been commissioned with antiprotons and positrons. Since the AD will not be running during 2013,during the refurbishment of the CERN accelerators, the experiment is currently working with positrons, electrons and protons, in order to prepare the way for the antihydrogen production in late 2014

Particle tracking at cryogenic temperatures: the Fast Annihilation Cryogenic Tracking (FACT) detector for the AEgIS antimatter gravity experiment

The AEgIS experiment is an interdisciplinary collaboration between atomic, plasma and particle physicists, with the scientific goal of performing the first precision measurement of the Earth’s gravitational acceleration on antimatter. The principle of the experiment is as follows: cold antihydrogen atoms are synthesized in a Penning-Malmberg trap and are Stark accelerated towards a moire deflectometer, the classical counterpart of an atom interferometer, and annihilate on a position sensitive detector. Crucial to the success of the experiment is an antihydrogen detector that will be used to demonstrate the production of antihydrogen and also to measure the temperature of the anti-atoms and the creation of a beam. The operating requirements for the detector are very challenging: it must operate at close to 4 K inside a 1 T solenoid magnetic field and identify the annihilation of the antihydrogen atoms that are produced during the 1 µs period of antihydrogen production. Our solution — called the FACT detector — is based on a novel multi-layer scintillating fiber tracker with SiPM readout and off the shelf FPGA based readout system. This talk will present the design of the FACT detector and detail the operation of the detector in the context of the AEgIS experiment

On the Two-Step Ageing in a Commercial Al-Zn-Mg Alloy. A Study by Positron Lifetime Spectroscopy.

Formation of Guinier-Preston zones and precipitation, induced by two-step ageing thermal treatments in an age-hardenable commercial Al-Zn-Mg-based alloy, have been studied by positron lifetime spectroscopy and Vickers microhardness measurements. In particular, an initial softening of the specimens, occurring in the early stages of the second ageing step (artificial ageing at 150°C), appears to be correlated with a strong decrease in the positron lifetime, which indicates a partial dissolution of the GP zones. If the treatment at 150°C is interrupted at this stage, and the ageing continues at a lower temperature (either room temperature or 70°C), the positron lifetime and the microhardness recover to the values reached at the end of the first ageing step (natural ageing at room temperature for five days). The kinetics of this process is discussed in terms of reconstruction of GP zones; the activation energy value of this process is also obtained

Pre-precipitation Study in the 7012 Al-Zn-Mg-Cu Alloy by Electrical Resistivity.

A study of the microstructural evolution of a commercial 7012 (Al–Zn–Mg–Cu) age-hardenable alloy following artificial ageing by high resolution and conventional transmission electron microscopy and positron annihilation lifetime spectroscopy is presented. At the early stages of decomposition, the microstructure included precipitation of either pre-precipitate solute clusters or Guinier–Preston zones and semicoherent η′ precipitates, with typical sizes between 1 and 10 nm. Quantitative information on the size, number density and morphology of the particles present in the microstructure was obtained. The results were correlated with those obtained using positron annihilation lifetime spectroscopy