Torque de desinserción y propiedades fisico-químicas de implantes dentales grabados con ácidos fluorhídrico y nítrico: estudio experimental en perros Beagle

Objetivo: Estudiar la composición, características superficiales y respuesta al torque de desinserción de una superficie implantaria tratada inicialmente con ácido fluorhídrico y posterior pasivado con ácidos fluorhídrico y nítrico. Diseño del estudio: En una primera fase, se seleccionaron 12 implantes en los que se estudiaron las características fisico-químicas mediante mediciones de energía dispersa de rayos X (EDS), microscopio electrónico de barrido y análisis de XPS (espectrometría de fotoelectrones). Asimismo, se colocaron 24 implantes 'doce de 8 mm y doce de 10 mm de longitud-, en seis perros beagle, en los que tras un período de reposo, se procedió a la retirada de 12 implantes a las seis semanas y los 12 restantes a las doce semanas, mediante un calibrador de torque Gauge TonichiR modelo BGT150CN-S -con un rango de registro de fuerza de 0 a 150 Ncm. Resultados: El análisis de la composición química superficial mediante EDS sólo mostró la presencia de titanio en las superficies grabadas. En el análisis mediante XPS, al igual que sucede con las superficies de otros implantes dentales, aparecieron trazas de otros elementos presentes en la superficie, fundamentalmente de carbono. La morfología de la superficie tras el doble grabado con ácido, permitió observar la rugosidad creada por el ataque ácido, con una morfología bastante homogénea. Los valores de rugosidad obtenidos fueron superiores al micrómetro. Los valores medios encontrados para el torque de desinserción, a las seis semanas, fueron de 79,7 Ncm para los implantes de 8 mm de longitud y 115 Ncm para los implantes de 10 mm. A las doce semanas, estos valores incrementaron hasta 101,2 Ncm para los implantes de 8 mm y 139,7 Ncm para los implantes de 10 mm de longitud. Conclusiones: El grabado con ácido fluorhídrico y nítrico, posee características superficiales óptimas y comparables al de otras superficies. Los valores de torque de desinserción abren la posibilidad para su aplicación en clínica humana para procedimientos de carga precoz o inmediata.Objective: To study the composition, surface characteristics and response to removal torque of an implant surface subjected to hydrofluoric acid etching and posterior passivating with hydrofluoric and nitric acid. Study design: Twelve implants were initially selected and their physico-chemical characteristics were evaluated by means of energy-dispersive X-rays (EDS), scanning electron microscopy (SEM) and photoelectron spectroscopy (XPS). In addition, 24 implants ' 12 measuring 8 mm and 12 measuring 10 mm in length ' were implanted in 6 Beagle dogs. Twelve implants were removed after a recovery period of 6 weeks, followed by removal of the remaining 12 implants after 12 Medeweeks, using a torque calibrator (Gauge Tonichi® model BGT150CN-S) with a force registry range of 0-150 Ncm. Results: EDS analysis of the surface chemical composition only revealed the presence of titanium in the etched surfaces. In the same way as with the surfaces of other dental implants, XPS analysis revealed traces of other elements present in the surface, fundamentally carbon. Following dual acid etching, the surface showed the roughness resulting from acid action, with a morphology that proved to be quite homogeneous. The roughness values obtained exceeded 1 ìm. The mean removal torque values after 6 weeks were 79.7 Ncm for the 8 mm implants and 115 Ncm for the 10 mm implants. After 12 weeks, these values increased to 101.2 Ncm and 139.7 Ncm, respectively. Conclusions: Hydrofluoric and nitric acid etching affords optimum surface characteristics comparable to those of other surfaces. The recorded removal torque values raise the possibility of human clinical application for early or immediate loading procedures

Removal torque and physico-chemical characteristics of dental implants etched with hydrofluoric and nitric acid : an experimental study in Beagle dogs

Objective: To study the composition, surface characteristics and response to removal torque of an implant surface subjected to hydrofluoric acid etching and posterior passivating with hydrofluoric and nitric acid. Study design: Twelve implants were initially selected and their physico-chemical characteristics were evaluated by means of energy-dispersive X-rays (EDS), scanning electron microscopy (SEM) and photoelectron spectroscopy (XPS). In addition, 24 implants ? 12 measuring 8 mm and 12 measuring 10 mm in length ? were implanted in 6 Beagle dogs. Twelve implants were removed after a recovery period of 6 weeks, followed by removal of the remaining 12 implants after 12 weeks, using a torque calibrator (Gauge Tonichi® model BGT150CN-S) with a force registry range of 0-150 Ncm. Results: EDS analysis of the surface chemical composition only revealed the presence of titanium in the etched surfaces. In the same way as with the surfaces of other dental implants, XPS analysis revealed traces of other elements present in the surface, fundamentally carbon. Following dual acid etching, the surface showed the roughness resulting from acid action, with a morphology that proved to be quite homogeneous. The roughness values obtained exceeded 1 µm. The mean removal torque values after 6 weeks were 79.7 Ncm for the 8 mm implants and 115 Ncm for the 10 mm implants. After 12 weeks, these values increased to 101.2 Ncm and 139.7 Ncm, respectively. Conclusions: Hydrofluoric and nitric acid etching affords optimum surface characteristics comparable to those of other surfaces. The recorded removal torque values raise the possibility of human clinical application for early or immediate loading procedures

Effects of COVID-19 Lockdown on Tumour Burden of Melanoma and Cutaneous Squamous Cell Carcinoma.

The aim of this study was to compare tumour burden in patients who underwent surgery for melanoma and cutaneous squamous cell carcinoma during nationwide lockdown in Spain due to COVID-19 (for the period 14 March to 13 June 2020) and during the same dates in 2019 before the COVID-19 pandemic. In addition, associations between median tumour burden (Breslow thickness for melanoma and maximum clinical diameter for cutaneous squamous cell carcinoma) and demographic, clinical, and medical factors were analysed, building a multivariate linear regression model. During the 3 months of lockdown, there was a significant decrease in skin tumours operated on (41% decrease for melanoma (n = 352 vs n = 207) and 44% decrease for cutaneous squamous cell carcinoma (n = 770 vs n = 429)) compared with the previous year. The proportion of large skin tumours operated on increased. Fear of SARS-CoV-2 infection, with respect to family member/close contact, and detection of the lesion by the patient or doctor, were related to thicker melanomas; and fear of being diagnosed with cancer, and detection of the lesion by the patient or relatives, were related to larger size cutaneous squamous cell carcinoma. In conclusion, lockdown due to COVID-19 has resulted in a reduction in treatment of skin cancer

Investigación educativa en las aulas de primaria

Reúne trabajos derivados de la experiencias de diversos docentes en educación primaria en los siguientes temas: Tecnología de Información y Comunicación, educación inclusiva, enseñanza de la música, educación física, enseñanza de la historia, acoso escolar, auto-evaluación, métodos de enseñanza, inteligencia emocional, percepción del alumno, marco cognitivo en comprensión lectora y comunicación escuela-familia

Experiencias de innovación educativa en la Universidad de Murcia (2008)

Resumen tomado de la publicaciónSe recogen diversos proyectos de innovación realizados por el profesorado de la Universidad de Murcia. Son experiencias de adaptación, en las que se han diseñado, aplicado y evaluado diversas acciones de enseñanza, como : el aprendizaje basado en problemas, portafolios, aprendizaje cooperativo, planes de acción tutorial o curso cero de acogida de estudiantes, entre otros. Se trata de dar respuesta al cambio que requiere el proceso de de Convergencia Europea.MurciaBiblioteca de Educación del Ministerio de Educación, Cultura y Deporte; Calle San Agustín 5 -3 Planta; 28014 Madrid; Tel. +34917748000; [email protected]