865 research outputs found
Identification of two cracks with different severity in beams and rods from minimal frequency data
It has been known for a long time that the problem of identifying two small cracks in a simply supported beam from the first three natural frequencies can be analytically formulated and solved if the two cracks have equal severity. In this paper we extend this result to the case of cracks with different severity. Each crack is simulated by a rotational elastic spring and the inverse problem is solved in terms of the damage-induced changes in the first four natural frequencies. Closed-form expressions of the damage parameters in terms of the measured frequencies are obtained. The results can be extended to the identification of two cracks in a longitudinally vibrating beam based on a suitable set of natural frequency and antiresonant frequency data. Numerical simulations support the theory, and show that if accurate input data are available and the cracks are not too close, then damage identification leads to satisfactory results
A constitutive model for analyzing martensite formation in austenitic steels deforming at high strain rates
This study presents a constitutive model for steels exhibiting SIMT, based on previous seminal works, and the corresponding methodology to estimate their parameters. The model includes temperature effects in the phase transformation kinetics, and in the softening of each solid phase through the use of a homogenization technique. The model was validated with experimental results of dynamic tensile tests on AISI 304 sheet steel specimens, and their predictions correlate well with the experimental evidence in terms of macroscopic stress–strain curves and martensite volume fraction formed at high strain rates. The work shows the value of considering temperature effects in the modeling of metastable austenitic steels submitted to impact conditions. Regarding most of the works reported in the literature on SIMT, modeling of the martensitic transformation at high strain rates is the distinctive feature of the present paper.The researchers of the University Carlos III of Madrid are indebted to the Comunidad Autónoma de Madrid (Project CCG10-UC3M/DPI-5596)) and to the Ministerio de Ciencia e Innovación de España (Project DPI/2008-06408) for the financial support received which allowed conducting part of this work. The authors express their thanks to Mr. Philippe and Mr. Tobisch from the company Zwick for the facilities provided to perform the tensile tests at high strain rates
Unique determination of a single crack in a uniform simply supported beam in bending vibration
In this paper we consider one of the basic inverse problems in damage detection based on natural frequency data, namely the identification of a single open crack in a uniform simply supported beam from measurement of the first and the second natural frequency. It is commonly accepted in the literature that the knowledge of this set of spectral data allows for the unique determination of the severity and the position (up to symmetry) of the damage. However, in spite of the fact that many numerical evidences are in support of this property, the result is rigorously proved only when the severity of the crack is small. In this paper we definitely show, by means of an original constructive method, that the above result holds true for any level of crack severity. (C) 2016 Elsevier Ltd. All rights reserved
A constitutive model for analyzing martensite formation in austenitic steels deforming at high strain rates
This study presents a constitutive model for steels exhibiting SIMT, based on previous seminal works, and the corresponding methodology to estimate their parameters. The model includes temperature effects in the phase transformation kinetics, and in the softening of each solid phase through the use of a homogenization technique. The model was validated with experimental results of dynamic tensile tests on AISI 304 sheet steel specimens, and their predictions correlate well with the experimental evidence in terms of macroscopic stress–strain curves and martensite volume fraction formed at high strain rates. The work shows the value of considering temperature effects in the modeling of metastable austenitic steels submitted to impact conditions. Regarding most of the works reported in the literature on SIMT, modeling of the martensitic transformation at high strain rates is the distinctive feature of the present paper.The researchers of the University Carlos III of Madrid are indebted to the Comunidad Autónoma de Madrid (Project CCG10-UC3M/DPI-5596)) and to the Ministerio de Ciencia e Innovación de España (Project DPI/2008-06408) for the financial support received which allowed conducting part of this work. The authors express their thanks to Mr. Philippe and Mr. Tobisch from the company Zwick for the facilities provided to perform the tensile tests at high strain rates
La dieta alta en grasas y el Aceite de oliva virgen extra (AOVE) modulan la homeostasis lipídica testicular a través de la proteína Srebp-2
La obesidad y el sobrepeso están aumentando en todo el mundo y tienen influencias perjudiciales en varias funciones del cuerpo humano, incluida la salud reproductiva. Definir los mecanismos de cómo el aumento del colesterol en la dieta amenaza la salud reproductiva masculina es fundamental para desarrollar enfoques que mejoren los problemas actuales de fertilidad.Fil: Funes A, .
Universidad del AconcaguaFil: Crescitelli, J..
Universidad del AconcaguaFil: Fernandez, M..
Universidad del AconcaguaFil: Monclús, M..
Universidad del AconcaguaFil: Fornés, M..
Universidad del AconcaguaFil: Saez. Lancellotti E. .
Universidad del Aconcagu
Visual processing speed in hemianopia patients secondary to acquired brain injury: a new assessment methodology
Producción CientíficaBackground: There is a clinical need to identify diagnostic parameters that objectively quantify and monitor the
effective visual ability of patients with homonymous visual field defects (HVFDs). Visual processing speed (VPS) is an
objective measure of visual ability. It is the reaction time (RT) needed to correctly search and/or reach for a visual
stimulus. VPS depends on six main brain processing systems: auditory-cognitive, attentional, working memory,
visuocognitive, visuomotor, and executive. We designed a new assessment methodology capable of activating
these six systems and measuring RTs to determine the VPS of patients with HVFDs.
Methods: New software was designed for assessing subject visual stimulus search and reach times (S-RT and R-RT
respectively), measured in seconds. Thirty-two different everyday visual stimuli were divided in four complexity
groups that were presented along 8 radial visual field positions at three different eccentricities (10o, 20o, and 30o).
Thus, for each HVFD and control subject, 96 S- and R-RT measures related to VPS were registered. Three additional
variables were measured to gather objective data on the validity of the test: eye-hand coordination mistakes
(ehcM), eye-hand coordination accuracy (ehcA), and degrees of head movement (dHM, measured by a head-tracker
system). HVFD patients and healthy controls (30 each) matched by age and gender were included. Each subject
was assessed in a single visit. VPS measurements for HFVD patients and control subjects were compared for the
complete test, for each stimulus complexity group, and for each eccentricity.
Results: VPS was significantly slower (p < 0.0001) in the HVFD group for the complete test, each stimulus
complexity group, and each eccentricity. For the complete test, the VPS of the HVFD patients was 73.0% slower
than controls. They also had 335.6% more ehcMs, 41.3% worse ehcA, and 189.0% more dHMs than the controls.
Conclusions: Measurement of VPS by this new assessment methodology could be an effective tool for objectively
quantifying the visual ability of HVFD patients. Future research should evaluate the effectiveness of this novel
method for measuring the impact that any specific neurovisual rehabilitation program has for these patients
Spectroscopic and Mechanistic Studies of Heterodimetallic Forms of Metallo-β-lactamase NDM-1
In an effort to characterize the roles of each metal ion in metallo-β-lactamase NDM-1, heterodimetallic analogues (CoCo-, ZnCo-, and CoCd-) of the enzyme were generated and characterized. UV–vis, 1H NMR, EPR, and EXAFS spectroscopies were used to confirm the fidelity of the metal substitutions, including the presence of a homogeneous, heterodimetallic cluster, with a single-atom bridge. This marks the first preparation of a metallo-β-lactamase selectively substituted with a paramagnetic metal ion, Co(II), either in the Zn1 (CoCd-NDM-1) or in the Zn2 site (ZnCo-NDM-1), as well as both (CoCo-NDM-1). We then used these metal-substituted forms of the enzyme to probe the reaction mechanism, using steady-state and stopped-flow kinetics, stopped-flow fluorescence, and rapid-freeze-quench EPR. Both metal sites show significant effects on the kinetic constants, and both paramagnetic variants (CoCd- and ZnCo-NDM-1) showed significant structural changes on reaction with substrate. These changes are discussed in terms of a minimal kinetic mechanism that incorporates all of the data
Assessment of Platelet REACtivity After Transcatheter Aortic Valve Replacement : The REAC-TAVI Trial
The REAC-TAVI (Assessment of platelet REACtivity after Transcatheter Aortic Valve Implantation) trial enrolled patients with aortic stenosis (AS) undergoing transcatheter aortic valve replacement (TAVR) pre-treated with aspirin + clopidogrel, aimed to compare the efficacy of clopidogrel and ticagrelor in suppressing high platelet reactivity (HPR) after TAVI. Current recommendations support short-term use of aspirin + clopidogrel for patients with severe AS undergoing TAVR despite the lack of compelling evidence. This was a prospective, randomized, multicenter investigation. Platelet reactivity was measured at 6 different time points with the VerifyNow assay (Accriva Diagnostics, San Diego, California). HPR was defined as (P2Y reaction units (PRU) ≥208. Patients with HPR before TAVR were randomized to either aspirin + ticagrelor or aspirin + clopidogrel for 3 months. Patients without HPR continued with aspirin + clopidogrel (registry cohort). The primary endpoint was non-HPR status (PRU <208) in ≥70% of patients treated with ticagrelor at 90 days post-TAVR. A total of 68 patients were included. Of these, 48 (71%) had HPR (PRU 273 ± 09) and were randomized to aspirin + ticagrelor (n = 24, PRU 277 ± 08) or continued with aspirin + clopidogrel (n = 24, PRU 269 ± 49). The remaining 20 patients (29%) without HPR (PRU 133 ± 12) were included in the registry. Overall, platelet reactivity across all the study time points after TAVR was lower in patients randomized to ticagrelor compared with those treated with clopidogrel, including those enrolled in the registry (p < 0.001). The primary endpoint was achieved in 100% of patients with ticagrelor compared with 21% with clopidogrel (p < 0.001). Interestingly, 33% of clopidogrel responder patients at baseline developed HPR status during the first month after TAVR. HPR to clopidogrel is present in a considerable number of patients with AS undergoing TAVR. Ticagrelor achieves a better and faster effect, providing sustained suppression of HPR to these patients. (Platelet Reactivity After TAVI: A Multicenter Pilot Study [REAC-TAVI]; NCT02224066
- …