A constitutive model for analyzing martensite formation in austenitic steels deforming at high strain rates

This study presents a constitutive model for steels exhibiting SIMT, based on previous seminal works, and the corresponding methodology to estimate their parameters. The model includes temperature effects in the phase transformation kinetics, and in the softening of each solid phase through the use of a homogenization technique. The model was validated with experimental results of dynamic tensile tests on AISI 304 sheet steel specimens, and their predictions correlate well with the experimental evidence in terms of macroscopic stress–strain curves and martensite volume fraction formed at high strain rates. The work shows the value of considering temperature effects in the modeling of metastable austenitic steels submitted to impact conditions. Regarding most of the works reported in the literature on SIMT, modeling of the martensitic transformation at high strain rates is the distinctive feature of the present paper.The researchers of the University Carlos III of Madrid are indebted to the Comunidad Autónoma de Madrid (Project CCG10-UC3M/DPI-5596)) and to the Ministerio de Ciencia e Innovación de España (Project DPI/2008-06408) for the financial support received which allowed conducting part of this work. The authors express their thanks to Mr. Philippe and Mr. Tobisch from the company Zwick for the facilities provided to perform the tensile tests at high strain rates

A constitutive model for analyzing martensite formation in austenitic steels deforming at high strain rates

This study presents a constitutive model for steels exhibiting SIMT, based on previous seminal works, and the corresponding methodology to estimate their parameters. The model includes temperature effects in the phase transformation kinetics, and in the softening of each solid phase through the use of a homogenization technique. The model was validated with experimental results of dynamic tensile tests on AISI 304 sheet steel specimens, and their predictions correlate well with the experimental evidence in terms of macroscopic stress–strain curves and martensite volume fraction formed at high strain rates. The work shows the value of considering temperature effects in the modeling of metastable austenitic steels submitted to impact conditions. Regarding most of the works reported in the literature on SIMT, modeling of the martensitic transformation at high strain rates is the distinctive feature of the present paper.The researchers of the University Carlos III of Madrid are indebted to the Comunidad Autónoma de Madrid (Project CCG10-UC3M/DPI-5596)) and to the Ministerio de Ciencia e Innovación de España (Project DPI/2008-06408) for the financial support received which allowed conducting part of this work. The authors express their thanks to Mr. Philippe and Mr. Tobisch from the company Zwick for the facilities provided to perform the tensile tests at high strain rates

Dispersion cancellation and quantum eraser experiments analyzed in the Wigner function formalism

We extend the Wigner function formalism for parametric down-conversion experiments presented in a previous paper [Phys. Rev. A 55 3879 (1997)] to experiments involving propagation through a dispersive medium [Steinberg et al., Phys. Rev. A 45, 6659 (1992)], and polarization [Kwiat et al., Phys. Rev. A 45, 7729 (1992)]

Numerical Simulation of the effect adiabatic temperature increase in martensitic transformation of austenitic steels

The predictions of the constitutive model agree with experimental results in terms of macroscopy stress-strain curves and volume fraction of martensite formed during loadin

Docker security in web simulation tools: a layered approach

International Conference on Wireless Networks and Mobile Communication (EUIWNMC), 26/08/2021-27/08/2021, Marrakesh, Marruecos.In this work, container security issues and strengths are studied using Docker as the main implementation. First, the container infrastructure is described and compared against the traditional approach of virtual machines. Secondly, the Docker containers security is discussed by the different infrastructure layers that compose them and different solutions are proposed to try to decrease the attack surface over this kind of applications.Universidad de Alcal

Lubrication performance of an ammonium cation-based ionic liquid used as an additive in a polar oil.

This paper studies the tribological behavior of the ionic liquid methyltrioctylammonium bis(trifluoromethylsulfonyl)imide ([N 1888 ][NTf 2 ]) as additive at different concentrations (1.25, 2.50, 3.75 and 5.00 wt%) in a polar base oil (diester). A tribometer using a ball-on-disk reciprocating configuration under fully flooded lubrication was used at a frequency of 15 Hz, at three different loads (40, 80 and 120 N), stroke length of 4 mm, and duration of 45 min. Worn surface on the disk was studied by confocal microscopy, SEM and XPS. Main results showed similar coefficient of friction for all lubricant samples; but different wear results were found at different loads, probably related with the chemical states found for fluorine on the worn surface and the temperature-dependent adsorption-desorption processes

Tribological behavior of oils additised with a phosphonium-derived ionic liquid compared to a commercial oil

Purpose: The purpose of this paper is to study the antifriction, antiwear and tribolayer formation properties of the trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl) phosphinate ionic liquid (IL) as additive at 1 wt.% in two base oils and their mixtures, comparing the results with those of a commercial oil. Design/methodology/approach: The mixture of the base oils used in the formulation of the commercial oil SAE 0W20 plus the IL was tested under rolling/sliding and reciprocating conditions to determine the so-called Stribeck curve, the tribolayer formation and the antifriction and antiwear behaviors. Findings: The use of this IL as additive in these oils does not change their viscosity; improves the antifriction and antiwear properties of the base oils, making equal or outperforming these properties of the SAE 0W20; and the thickness and formation rate of the tribolayer resulting from the IL-surface interaction is highly dependent on the type of base oil and influence on the friction and wear results. Originality/value: The use of this IL allows to replace partial or totally commercial antifriction and antiwear additives. Peer review: The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2020-0179/

A de novo complete BRCA1 gene deletion identified in a Spanish woman with early bilateral breast cancer

<p>Abstract</p> <p>Background</p> <p>Germline mutations in either of the two tumor-suppressor genes, <it>BRCA1 </it>and <it>BRCA2</it>, account for a significant proportion of hereditary breast and ovarian cancer cases. Most of these mutations consist of deletions, insertions, nonsense mutations, and splice variants, however an increasing number of large genomic rearrangements have been identified in these genes.</p> <p>Methods</p> <p>We analysed <it>BRCA1 </it>and <it>BRCA2 </it>genes by direct sequencing and MLPA. We confirmed the results by an alternative MLPA kit and characterized the <it>BRCA1 </it>deletion by Array CGH.</p> <p>Results</p> <p>We describe the first case of a patient with no strong family history of the disease who developed early-onset bilateral breast cancer with a <it>de novo </it>complete <it>BRCA1 </it>gene deletion in the germinal line. The detected deletion started from the region surrounding the <it>VAT1 </it><it>locus </it>to the beginning of <it>NBR1 </it>gene, including the <it>RND2</it>, Ψ<it>BRCA1</it>, <it>BRCA1 </it>and <it>NBR2 </it>complete genes.</p> <p>Conclusion</p> <p>This finding supports the large genomic rearrangement screening of <it>BRCA </it>genes in young breast cancer patients without family history, as well as in hereditary breast and ovarian cancer families previously tested negative for other variations.</p

The major allergens of birch pollen and cow milk, Bet v 1 and Bos d 5, are structurally related to human licocalin 2, enabling them to manipulate T-helper cells depending on their load with siderophore-bound iron

We conclude that Bet v 1 and Bos d 5 not only structurally mimic human LCN2, but also functionally by their ability to bind iron via siderophores. The apo-forms promote Th2 cells, whereas the holo-forms appear to be immunosuppressive. These results provide for the first time a functional understanding on the principle of allergenicity of major allergens from entirely independent sources, like birch and milk