18 research outputs found
Application of multi-sensor advanced DInSAR analysis to severe land subsidence recognition: Alto Guadalentín Basin (Spain)
Multi-sensor advanced DInSAR analyses have been performed and compared with
two GPS station measurements, in order to evaluate the land subsidence
evolution in a 20-year period, in the Alto Guadalentín Basin where the
highest rate of man-induced subsidence (> 10 cm yr−1) of
Europe had been detected. The control mechanisms have been examined
comparing the advanced DInSAR data with conditioning and triggering factors
(i.e. isobaths of Plio-Quaternary deposits, soft soil thickness and
piezometric level)
Regional subsidence modelling in Murcia city (SE Spain) using 1-D vertical finite element analysis and 2-D interpolation of ground surface displacements
Subsidence is a hazard that may have natural or anthropogenic origin causing
important economic losses. The area of Murcia city (SE Spain) has been
affected by subsidence due to groundwater overexploitation since the year
1992. The main observed historical piezometric level declines occurred in
the periods 1982–1984, 1992–1995 and 2004–2008 and showed a close
correlation with the temporal evolution of ground displacements. Since 2008,
the pressure recovery in the aquifer has led to an uplift of the ground
surface that has been detected by the extensometers. In the present work an
elastic hydro-mechanical finite element code has been used to compute the
subsidence time series for 24 geotechnical boreholes, prescribing the
measured groundwater table evolution. The achieved results have been
compared with the displacements estimated through an advanced DInSAR
technique and measured by the extensometers. These spatio-temporal
comparisons have showed that, in spite of the limited geomechanical data
available, the model has turned out to satisfactorily reproduce the
subsidence phenomenon affecting Murcia City. The model will allow the
prediction of future induced deformations and the consequences of any
piezometric level variation in the study area
Regional subsidence modelling in Murcia city (SE Spain) using 1-D vertical finite element analysis and 2-D interpolation of ground surface displacements
Subsidence is a hazard that may have natural or anthropogenic origin causing important economic losses. The area of Murcia city (SE Spain) has been affected by subsidence due to groundwater overexploitation since the year 1992. The main observed historical piezometric level declines occurred in the periods 1982–1984, 1992–1995 and 2004–2008 and showed a close correlation with the temporal evolution of ground displacements. Since 2008, the pressure recovery in the aquifer has led to an uplift of the ground surface that has been detected by the extensometers. In the present work an elastic hydro-mechanical finite element code has been used to compute the subsidence time series for 24 geotechnical boreholes, prescribing the measured groundwater table evolution. The achieved results have been compared with the displacements estimated through an advanced DInSAR technique and measured by the extensometers. These spatio-temporal comparisons have showed that, in spite of the limited geomechanical data available, the model has turned out to satisfactorily reproduce the subsidence phenomenon affecting Murcia City. The model will allow the prediction of future induced deformations
and the consequences of any piezometric level variation in the study area
Depth Averaged Models for Fast Landslide Propagation: Mathematical, Rheological and Numerical Aspects
This paper presents an overview of depth averaged modelling of fast catastrophic landslides where coupling of solid skeleton and pore fluid (air and water) is important. The first goal is to show how Biot-Zienkiewicz models can be applied to develop depth integrated, coupled models. The second objective of the paper is to consider a link which can be established between rheological and constitutive models. Perzyna´s viscoplasticity can be considered a general framework within which rheological models such as Bingham and cohesive frictional fluids can be derived. Among the several alternative numerical models, we will focus here on SPH which has not been widely applied by engineers to model landslide propagation. We propose an improvement, based on combining Finite Difference meshes associated to SPH nodes to describe pore pressure evolution inside the landslide mass. We devote a Section to analyze the performance of the models, considering three sets of tests and examples which allows to assess the model performance and limitations: (i) Problems having an analytical solution, (ii) Small scale laboratory tests, and (iii) Real cases for which we have had access to reliable informatio
Mathematical, Constitutive and Numerical Modelling of Catastrophic Landslides and Related Phenomena
Application of multi-sensor advanced DInSAR analysis to severe land subsidence recognition: Alto Guadalentín Basin (Spain)
Multi-sensor advanced DInSAR analyses have been performed and compared with two GPS station measurements, in order to evaluate the land subsidence evolution in a 20-year period, in the Alto Guadalentín Basin where the highest rate of man-induced subsidence (> 10 cm yr
−1) of Europe had been detected. The control mechanisms have been examined comparing the advanced DInSAR data with conditioning and triggering factors (i.e. isobaths of Plio-Quaternary deposits, soft soil thickness and piezometric level)
Twenty-year advanced DInSAR analysis of severe land subsidence: The Alto Guadalentín Basin (Spain) case study
A twenty-year period of severe land subsidence evolution in the Alto Guadalentín Basin (southeast Spain) is monitored using multi-sensor SAR images, processed by advanced differential interferometric synthetic aperture radar (DInSAR) techniques. The SAR images used in this study consist of four datasets acquired by ERS-1/2, ENVISAT, ALOS and COSMO-SkyMed satellites between 1992 and 2012. The integration of ground surface displacement maps retrieved for different time periods allows us to quantify up to 2.50 m of cumulated displacements that occurred between 1992 and 2012 in the Alto Guadalentín Basin. DInSAR results were locally compared with global positioning system (GPS) data available for two continuous stations located in the study area, demonstrating the high consistency of local vertical motion measurements between the two different surveying techniques. An average absolute error of 4.6 ± 4 mm for the ALOS data and of 4.8 ± 3.5 mm for the COSMO-SkyMed data confirmed the reliability of the analysis. The spatial analysis of DInSAR ground surface displacement reveals a direct correlation with the thickness of the compressible alluvial deposits. Detected ground subsidence in the past 20 years is most likely a consequence of a 100–200 m groundwater level drop that has persisted since the 1970s due to the overexploitation of the Alto Guadalentín aquifer system. The negative gradient of the pore pressure is responsible for the extremely slow consolidation of a very thick (> 100 m) layer of fine-grained silt and clay layers with low vertical hydraulic permeability (approximately 50 mm/h) wherein the maximum settlement has still not been reached
Analysis of SAR-derived products to support emergency management during volcanic crisis: La Palma case study
International audienceThis paper analyses the performance of SAR-based results to support emergency management operations during the volcanic crisis of La Palma island. Tajogaite eruption began on September 19th 2021 affecting a high populated area and the surrounding farmland, used for different agricultural purposes. SAR datasets obtained from Sentinel-1, COSMO-SkyMED, PAZ-TerraSAR-X and Capella satellites, were processed to calculate amplitude, coherence and differential interferograms. These results have permitted to map the morphology of the volcanic cone, the evolution of lava flows and the regional displacements. The comparison of the results obtained with the different satellites has been useful to understand their performance during an emergency scenario triggered by a volcanic eruption. COSMO-SkyMED has provided the most useful information for the analysis of the cone morphology and the lava flows. Sentinel-1 showed the best performance for regional displacements monitoring, whereas PAZ results was the second best option for all the retrieved products