10,432 research outputs found
Recommended from our members
An Optical Fiber Sensor for Measurement of Dynamic Structural Response
This paper reports the development of and an experimental study on an optical fiber sensor for monitoring civil infrastructure systems. This optical sensor employs a vibrating wire whose tension can be modulated by external force, strain, or vibration and transformed into the change of frequency of wire vibration. The frequency of wire is detected by light sent to and reflected from the wire through an optical fiber cable. Compared to other optical fiber sensors developed so far, the proposed sensor has two significant advantages: one is that the sensing head is a vibrating wire (rather than an optical fiber), which can sense a specific physical quantity without being interfered by miscellaneous effects; the other is that the wire vibration is a well understood and reliable physical phenomenon and its frequency is optically measured and transmitted without attenuation or distortion through the optical fiber to recording and other devices. These advantages make the sensor extremely simple, reliable and robust, and hence more readily deployable in civil infrastructure applications. Three prototypes have been developed and their static and dynamic characteristics have been experimentally tested. One of the prototypes was embedded into a concrete specimen to measure its strain and the result agrees with that from a conventional strain gauge. The experimental study with prototypes demonstrates the high performance of the developed optical sensor in terms of accuracy, high frequency range, and other characteristics
Recommended from our members
An Experimental Study of an Electro-Optical Displacement Sensor
This paper presents the results of an experimental study on an innovative electro-optical fiber sensor developed for measuring the dynamic response of civil structures such as buildings and bridges, which can be used for non-destructive evaluation of structural systems. This electro-optical sensor employs an electric circuit, LC oscillator, in which inductance and capacitance are connected in parallel. The resonant frequency of the LC oscillator is modulated by the external displacement transmitted through the core of the induction solenoid. This frequency is detected from the optically-transmitted oscillatory signal and the LC oscillator is optically powered. Compared to the conventional optical fiber sensors developed so far, the proposed sensor has two significant advantages: 1) the sensing head is an electric circuit (rather than an optical fiber cable), which can sense a specific physical quantity without interference from miscellaneous effects and is expected to be much more durable than the sensing head made of optical fiber cable as seen in usual extrinsic optical fiber sensors; 2) the LC oscillator is a well understood and reliable circuit with its resonant frequency measurable and transmittable without attenuation or distortion through an optical fiber cable over a long distance to recording and other devices. These advantages make the sensor extremely simple to design and manufacture, durable, reliable, robust to use, and hence, more readily deployable in civil structural applications. A prototype electro-optical strain sensor has been developed and its static and dynamic characteristics were experimentally tested. This sensor was also installed on a steel frame to measure the dynamic strain response when subjected to seismic ground motions during a shaking table test. The experimental study using the prototype demonstrated excellent performance of the electro-optical sensor in terms of accuracy, wide frequency range, and other advantageous characteristics for civil structural applications
Recommended from our members
Long-Term Monitoring and Identification of Bridge Structural Parameters
Vibration of a new concrete bridge was monitored and change in the bridge structural stiffness was identified accordingly over a 5-year period. This three-span 111-m long bridge is instrumented with 13 acceleration sensors at both the superstructure and the columns. The sensor data are transmitted to a server computer wirelessly. Modal parameters of the bridge, that is, the frequencies and the modal shapes were identified by processing 1,707 vibration data sets collected under traffic excitations, based on which the bridge structural parameters, stiffness and mass, and the soil spring values were identified by employing the neural network technique. The identified superstructure stiffness at the beginning of the monitoring was 97% of the stiffness value based on the design drawings. In the identified modal frequencies, a variation from −10% to +10% was observed over the monitoring period. In the identified stiffness values of the bridge superstructure, a variation from −3% to +3% was observed over the monitoring period. Based on the statistical analysis of the collected data for each year, 5% decrease in the first modal frequency and 2% decrease in the superstructure stiffness were observed over the 5-year monitoring period. Probability density functions were obtained for stiffness values each year. Stiffness threshold values for the collapse of the bridge under the operational loading can be determined. Then the number of years can be assessed for which the area under the proposed probability density functions is greater than the threshold value. So the information obtained in this study is valuable for studying aging and long-term performance assessment of similar bridges
Recommended from our members
Vibration Control of Tall Buildings Using Mega Sub-Configuration
An innovative vibration-control system is proposed to reduce the dynamic response of tall buildings to wind and seismic loads. This system takes advantage of the so-called megasubstructure configuration, which is especially popular in tall buildings. Substructures contained in the megastructure serve as energy absorbers so that no additional mass is required for the intended vibration control as seen in the conventional mass damper systems. The proposed system naturally resolves the difficulties in augmenting damping capacities of tall buildings associated with the high rigidity and deformation in the dominant bending mode. Dynamic characteristics of the proposed control system including the frequency response and the energy flow are investigated. Optimal values of structural parameters such as the damping ratio and stiffness of the substructure are determined. The feasibility and effectiveness of this unique control system in improving human comfort and protecting structures under both wind and earthquake loads are demonstrated through analytical and numerical analysis
Recommended from our members
Instantaneous damage detection of bridge structures and experimental verification
An extended Kalman filtering (EKF) method was developed and applied to instantaneously identify elemental stiffness values of a structure during damaging seismic events based on vibration measurement. This method is capable of dealing with nonlinear as well as linear structural responses. Identification of the structural elemental stiffness enables location as well as quantification of structural damage. The instantaneous stiffness values during an event can provide highly useful information for post-event capacity estimation. In this study, a large-scale shaking table test of a three-bent concrete bridge model was performed in order to verify the proposed damage detection method. The bridge model was shaken to different damage levels by a sequence of earthquake motions with increasing intensities. The elemental stiffness values of the structure were instantaneously identified in real time during the damaging earthquake excitations using the EKF method. The identified stiffness degradations and their locations agreed well with the structural damage observed by visual inspection and strain measurements. More importantly, the seismic response accelerations analytically simulated using the instantaneous stiffness values thus identified agreed well with the measured accelerations, demonstrating the accuracy of the identified stiffness. This study presents an experimental verification of a structural damage detection method using a realistic bridge model subjected to realistic seismic damage
Recommended from our members
A technique to Improve the Empirical Mode Decomposition in the Hilbert-Huang Transform
The Hilbert-based time-frequency analysis has promising capacity to reveal the time-variant behaviors of a system. To admit well-behaved Hilbert transforms, component decomposition of signals must be performed beforehand. This was first systematically implemented by the empirical mode decomposition (EMD) in the Hilbert-Huang transform, which can provide a time-frequency representation of the signals. The EMD, however, has limitations in distinguishing different components in narrowband signals commonly found in free-decay vibration signals. In this study, a technique for decomposing components in narrowband signals based on waves’ beating phenomena is proposed to improve the EMD, in which the time scale structure of the signal is unveiled by the Hilbert transform as a result of wave beating, the order of component extraction is reversed from that in the EMD and the end effect is confined. The proposed technique is verified by performing the component decomposition of a simulated signal and a free decay signal actually measured in an instrumented bridge structure. In addition, the adaptability of the technique to time-variant dynamic systems is demonstrated with a simulated time-variant MDOF system
Recommended from our members
Vibration control of super tall buildings subjected to wind loads
Excessive vibration due to wind loads is a major obstacle in design and construction of a super tall building. The authors recently introduced an innovative method for controlling the wind response of super tall buildings, which takes advantage of the so-called mega-sub structural configuration. Preliminary investigation was performed under the assumption that the wind load is a white noise and the building can be modeled as a shear structure. In this paper, a more reasonable tall building model (a cantilever beam) and a more realistic wind load model (a non-white stochastic process in time and space) are employed to design passive and hybrid mega-sub control systems and to examine the performance of such controlled buildings. Building vibration in both along-wind and across-wind directions is examined. The control parameters of the proposed systems, including the frequency ratio of the sub to the mega structures, the damping ratio of the sub structure, and the feedback gains of the actuator force, are studied and their optimal values are obtained. For comparison, a tall building without control and one with the conventional tuned-mass-damper control are also studied under the same load conditions. The significant cost-effectiveness of the proposed mega-sub systems is demonstrated in reducing the acceleration and deformation responses of tall buildings to wind loads, not only enhancing the safety of structure and its contents but also improving the comfort of occupants
Recommended from our members
Structural Health Monitoring by Recursive Bayesian Filtering
A new vision of structural health monitoring (SHM) is presented, in which the ultimate goal of SHM is not limited to damage identification, but to describe the structure by a probabilistic model, whose parameters and uncertainty are periodically updated using measured data in a recursive Bayesian filtering (RBF) approach. Such a model of a structure is essential in evaluating its current condition and predicting its future performance in a probabilistic context. RBF is conventionally implemented by the extended Kalman filter, which suffers from its intrinsic drawbacks. Recent progress on high-fidelity propagation of a probability distribution through nonlinear functions has revived RBF as a promising tool for SHM. The central difference filter, as an example of the new versions of RBF, is implemented in this study, with the adaptation of a convergence and consistency improvement technique. Two numerical examples are presented to demonstrate the superior capacity of RBF for a SHM purpose. The proposed method is also validated by large-scale shake table tests on a reinforced concrete two-span three-bent bridge specimen
- …