1,623 research outputs found

    Vortex dynamics resulting from the interaction between two NACA 23 012 airfoils

    No full text
    International audienceAn experimental study of the interaction between two airfoils, corresponding to a T-tail aircraft configuration, is implemented in a wind tunnel for a range of medium Reynolds numbers. Measurement of aerodynamic forces is carried out by strain gauges and the velocity field is obtained by particle image velocimetry. The study focuses on large angles-of-attack configurations, corresponding to detached flows on the airfoils and the presence of a downstream vortex shedding. Phase averages of the velocity fields are made building the flow time development. A lift modulation depending on geometric parameters and resulting from different pathlines of the shedding vortices, is discussed

    Simulation of the aeroelastic behavior of a possibly detached flow airfoil by a discrete vortex method

    Get PDF
    International audienceThe aeroelastic behavior of an airfoil results in a complex coupling between the elastic response of the structure and the dynamics of the flow. It can lead to the failure of a lifting surface which consequences could be catastrophic. Experiments and high-order computations contribute to the understanding of this phenomenon, but fast low-order methods are needed for engineering tasks. In the present work, we implement a loose fluid-structure coupling between a discrete-time vortex method, using a leading edge shedding criterion, and the structure motion equations. For each time step, the aerodynamic coefficients are first calculated before the computation of the motion of the structure. Flutter velocity is obtained with the same precision as unsteady standard method. The advantage of the method proposed is the ability to catch the limit cycle for velocities larger than flutter speed due to dynamic stall of the airfoil

    Bending relaxation of H2_2O by collision with para- and ortho-H2_2

    Full text link
    We extend our recent theoretical work on the bending relaxation of H2_2O in collisions with H2_2 by including the three water modes of vibration coupled with rotation, as well as the rotation of H2_2. Our full quantum close-coupling method (excluding the H2_2 vibration) is combined with a high-accuracy nine-dimensional potential energy surface. The collisions of para-H2_2O and ortho-H2_2O with the two spin modifications of H2_2 are considered and compared for several initial states of H2_2O. The convergence of the results as a function of the size of the rotational basis set of the two colliders is discussed. In particular, near-resonant energy transfer between H2_2O and H2_2 is found to control the vibrational relaxation process, with a dominant contribution of transitions with delta j2 = +2, +4. Finally, the calculated value of the H2_2O bending relaxation rate coefficient at 295 K is found to be in excellent agreement with its experimental estimate

    Exploration de l'écoulement dans un échangeur de chaleur tubulaire par vélocimétrie par images de particules

    No full text
    8 pagesL'étude du champ de vitesse à l'intérieur d'une maquette d'échangeur de chaleur en eau à l'échelle 1 est réalisée par vélocimétrie par images de particules. La géométrie tridimensionnelle de l'installation, ses faibles dimensions et la nature fortement instationnaire de l'écoulement imposent le choix de ce moyen de mesure. Un filtrage est appliqué aux images enregistrées, avant traitement par un algorithme de flot optique utilisant une programmation dynamique. Les déformations dues à la présence de dioptres optiques sont corrigées. Les mesures mettent en évidence de fortes variations de débit à travers les différents tubes de l'échangeur et un caractère non établi de l'écoulement. L'analyse des champs turbulents confirme ce comportement

    Strategies to facilitate the development of uncloned or cloned infectious full-length viral cDNAs: Apple chlorotic leaf spot virus as a case study

    Get PDF
    Background Approaches to simplify and streamline the construction of full-length infectious cDNA clones (FL-cDNAs) are needed. Among desirable improvements are the ability to use total nucleic acids (TNA) extracts from infected hosts (to bypass viral purification limitations) for the direct one-step amplification of large FL-cDNAs, the possibility to inoculate plants with uncloned FL-cDNAs and the simplified cloning of these large molecules. Results Using the 7.55 kb genome of Apple chlorotic leaf spot trichovirus (ACLSV) approaches allowing the rapid generation from TNA extracts of FL-cDNAs under the control of the T7 promoter and the successful inoculation of plants using in vitro transcripts obtained from these uncloned amplification products have been developed. We also show that the yeast homologous recombination system permits efficient cloning of FL-cDNAs and the simultaneous one-step tailoring of a ternary Yeast-Escherichia coli-Agrobacterium tumefaciens shuttle vector allowing efficient inoculation of both herbaceous and woody host plants by agroinfiltration. Conclusions The fast and efficient strategies described here should have broad applications, in particular for the study "difficult" plant viruses, such as those infecting woody hosts, and potentially for other, non plant-infecting viral agents

    Rancang Bangun Sistem Pengukuran Posisi Target dengan Kamera Stereo untuk Pengarah Senjata Otomatis

    Full text link
    Salah satu hal yang penting dalam mengarahkan senjata secara otomatis ke target adalah informasi posisi dari target terhadap senjata. Terdapat banyak metode untuk mengetahui posisi target. Salah satunya adalah dengan metode pengukuran triangulasi. Metode ini membutuhkan minimal dua citra untuk medapatkan informasi jarak target terhadap kamera. Kemudian, informasi jarak tersebut bisa diolah untuk mengetahui posisi target terhadap senjata. Di dalam sistem ini, stereo visual digunakan untuk mendukung proses pengukuran triangulasi. Stereo visual menggunakan dua kamera untuk menghasilkan dua citra. Dalam sistem ini, salah satu kamera bertindak sebagai pemilih target. Citra yang ditangkap dua kamera tersebut akan diproses oleh processing unit untuk mendapatkan informasi posisi target terhadap senjata. Informasi ini digunakan untuk menggerakkan motor pada platform senjata agar senjata mengarah ke target. Hasil pengujian yang dilakukan pada sistem ini adalah sistem dapat menentukan posisi target yang dipilih oleh operator dan juga dapat mengarahkan senjata ke arah target tersebut. Akurasi tertinggi dalam penentuan posisi target dicapai ketika jarak antar dua kamera sekitar 30 cm

    Forçage d'un profil par des tourbillons de Von Kármán provenant d'un profil amont

    Get PDF
    Une étude expérimentale de l'interaction entre deux profils, correspondant à une configuration d'avion à empennage en T, est conduite en soufflerie pour une gamme de nombres de Reynolds moyens. La mesure des forces aérodynamiques est effectuée par des balances à jauges de déformation et le champ de vitesse est obtenu par vélocimétrie par images de particules. L'étude se concentre sur les configurations à grands angles d'incidence, correspondant à des écoulements décollés sur les profils et la présence d'une allée de tourbillons alternés de Von Kármán. Des moyennes de phase des champs de vitesse sont obtenues afin d'observer l'évolution temporelle de l'écoulement. On constate une modulation de la portance, qui dépend des paramètres géométriques des trajectoires des tourbillons

    Caractérisation multi-plan d'un écoulement de cavité tridimensionnel par PIV stéréoscopique

    Get PDF
    La mesure des trois composantes de la vitesse est obtenue par PIV stéréoscopique avec un algorithme de flot optique. Cette méthode est un outil efficace pour une caractérisation quantitative de champs instantanés tridimensionnels comme les écoulements au sein desquels se développent des structures tourbillonnaires. Ce système est ici appliqué à un écoulement de recirculation dans une cavité, où des instabilités associées à des structures tourbillonnaires sont présentes. Les mesures sont effectuées dans deux plans d'observation orthogonaux pour rendre compte de la structure 3D de l'écoulement
    corecore