Development of Environment-Friendly Concrete through Partial Addition of Waste Glass Powder (WGP) as Cement Replacement

This paper presents the study carried out on the utilization of Waste Glass Powder (WGP) as supplementary cementitious material in concrete. The evaluation of the influence of WGP on the mechanical properties of concrete was carried out by casting and testing of concrete samples as per ASTM standards (cylinders and beam elements). The control samples were designed to represent field conditions with a target compressive strength of 20,000 kPa. The Portland cement in concrete was substituted with WGP in proportions of 0%-35% by weight, in increments of 5%. Two curing domains were adopted in the preparation of the test samples to evaluate the effect of pozzolanic material wherein the tested samples were cured for 28, 56, and 84 days. The study results indicated a reduction in compressive strength of concrete up to 10% with partial replacement of cement with 25% of WGP when standard curing of 28 days was adopted. Furthermore, with the same replacement proportion and prolonged curing for 84 days, the gap in strength reduction was reduced by 5%. However, a significant decrease in workability was noted between the control concrete samples and glass powder infused concrete. Furthermore, the Waste Glass Powder Concrete (WGPC) exhibited an improved flexural strength with the modulus of rupture for WGPC being 2% higher than control concrete at the age of 84 days. Based on the results of this study it was concluded that 25% replacement of cement with WGP provides an optimum replacement ratio. Doi: 10.28991/cej-2020-03091620 Full Text: PD

Finite Element Analysis of RC Beams Retrofitted and Strengthened with CFRP

This study aims to develop a finite element model for accurately predicting the behavior of RC beams retrofitted and strengthened with CFRP strips. Two types of CFRP layout are modelled, CFRP wraps at the bottom without any anchorage, and CFRP strips with CFRP wrap as anchorage. The developed numerical models are validated by experimentally testing RC beam models for four-point bending. The concrete damage plasticity model is used for introducing non-linearity in concrete. The non-linear tensile and compressive parameters are taken from the ABAQUS manual specifications. The interface between the CFRP and RC beam surface was replicated using a perfect bond between the two. The results show that the developed numerical model accurately predicts the strength of retrofitted and strengthened beams. Though numerical models show higher initial stiffnesses and cracking load, especially in the case of a retrofitted specimen, where the initial stiffness is as high as 75%

Flexural Performance of Composite RC Beams Having an ECC Layer at the Tension Face

This paper presents an experimental study on the flexural behavior of composite Reinforced Concrete (RC) beams having a monolithic Engineered Cementitious Composites (ECC) layer at the tension face. Due to the brittle nature of normal concrete, clear cover on the tension side of beam cracks results in spalling and corrosion of reinforcement. The proposed technique overcomes the inherent brittle behavior of normal concrete with the incorporation of ECC on the tension face. This also helps in reducing bond-splitting, cover-spalling, and buckling of reinforcement in RC flexural members. For testing purposes, six full-scale beam specimens (225 mm x 300 mm x 2400 mm) with the same reinforcement were cast and tested. Out of six, two specimens were made of conventional concrete, whereas the remaining four (two each) had an ECC layer of 75mm and 100mm thick at the tension face respectively. Each specimen was installed with three strain gauges (one each at the midspan top & bottom surface of concrete and one midspan rebar on the tension face) and one LVDT at midspan. The samples were then subjected to simple monotonic loading under a third-point bending test as per ASTM C78. The load-displacement, stress-strain and moment-curvature curves were obtained for all the tested specimens. It was found that ECC-strengthened beam samples displayed an increased flexural performance at first crack, yield, and ultimate load-carrying capacity as compared to conventional RC specimens. Whereas a better crack arrest with even distribution of cracks and improvement in ductility was observed for the ECC-strengthened composite beams

Phytophthora-citrus interactions and management strategies: a review

Citrus production is declining worldwide due to several biotic and abiotic factors. The diseases caused by Phytophthora spp. present major economic risks since they are soil-borne and spread quickly if environmental conditions are favorable, or irrigation is poorly managed. Phytophthora species are present in all citrus-producing areas around the world causing significant losses in crop yield and affecting tree health. Bark infection, damping-off, root rot, gummosis, brown rot, and cortical root rot are among the typical symptoms caused by Phytophthora spp. The pathogenicity of Phytophthora spp. depends mainly on the specific interactions between the isolates and citrus cultivars. The use of molecular technologies has allowed the study of Phytophthora-citrus interactions, leading to the identification of several classes of effector proteins secreted by Phytophthora spp. that challenge plant homeostasis and contribute in different ways to disease development and the elucidation of defense mechanisms employed by the host plant. Comprehensive management is need of time to conquer Phytophthora spp. for better root health and citrus productivity

Utilisation of an operative difficulty grading scale for laparoscopic cholecystectomy

Background A reliable system for grading operative difficulty of laparoscopic cholecystectomy would standardise description of findings and reporting of outcomes. The aim of this study was to validate a difficulty grading system (Nassar scale), testing its applicability and consistency in two large prospective datasets. Methods Patient and disease-related variables and 30-day outcomes were identified in two prospective cholecystectomy databases: the multi-centre prospective cohort of 8820 patients from the recent CholeS Study and the single-surgeon series containing 4089 patients. Operative data and patient outcomes were correlated with Nassar operative difficultly scale, using Kendall’s tau for dichotomous variables, or Jonckheere–Terpstra tests for continuous variables. A ROC curve analysis was performed, to quantify the predictive accuracy of the scale for each outcome, with continuous outcomes dichotomised, prior to analysis. Results A higher operative difficulty grade was consistently associated with worse outcomes for the patients in both the reference and CholeS cohorts. The median length of stay increased from 0 to 4 days, and the 30-day complication rate from 7.6 to 24.4% as the difficulty grade increased from 1 to 4/5 (both p < 0.001). In the CholeS cohort, a higher difficulty grade was found to be most strongly associated with conversion to open and 30-day mortality (AUROC = 0.903, 0.822, respectively). On multivariable analysis, the Nassar operative difficultly scale was found to be a significant independent predictor of operative duration, conversion to open surgery, 30-day complications and 30-day reintervention (all p < 0.001). Conclusion We have shown that an operative difficulty scale can standardise the description of operative findings by multiple grades of surgeons to facilitate audit, training assessment and research. It provides a tool for reporting operative findings, disease severity and technical difficulty and can be utilised in future research to reliably compare outcomes according to case mix and intra-operative difficulty

The development and validation of a scoring tool to predict the operative duration of elective laparoscopic cholecystectomy

Background: The ability to accurately predict operative duration has the potential to optimise theatre efficiency and utilisation, thus reducing costs and increasing staff and patient satisfaction. With laparoscopic cholecystectomy being one of the most commonly performed procedures worldwide, a tool to predict operative duration could be extremely beneficial to healthcare organisations. Methods: Data collected from the CholeS study on patients undergoing cholecystectomy in UK and Irish hospitals between 04/2014 and 05/2014 were used to study operative duration. A multivariable binary logistic regression model was produced in order to identify significant independent predictors of long (> 90 min) operations. The resulting model was converted to a risk score, which was subsequently validated on second cohort of patients using ROC curves. Results: After exclusions, data were available for 7227 patients in the derivation (CholeS) cohort. The median operative duration was 60 min (interquartile range 45–85), with 17.7% of operations lasting longer than 90 min. Ten factors were found to be significant independent predictors of operative durations > 90 min, including ASA, age, previous surgical admissions, BMI, gallbladder wall thickness and CBD diameter. A risk score was then produced from these factors, and applied to a cohort of 2405 patients from a tertiary centre for external validation. This returned an area under the ROC curve of 0.708 (SE = 0.013, p  90 min increasing more than eightfold from 5.1 to 41.8% in the extremes of the score. Conclusion: The scoring tool produced in this study was found to be significantly predictive of long operative durations on validation in an external cohort. As such, the tool may have the potential to enable organisations to better organise theatre lists and deliver greater efficiencies in care

Population‐based cohort study of outcomes following cholecystectomy for benign gallbladder diseases

Background The aim was to describe the management of benign gallbladder disease and identify characteristics associated with all‐cause 30‐day readmissions and complications in a prospective population‐based cohort. Methods Data were collected on consecutive patients undergoing cholecystectomy in acute UK and Irish hospitals between 1 March and 1 May 2014. Potential explanatory variables influencing all‐cause 30‐day readmissions and complications were analysed by means of multilevel, multivariable logistic regression modelling using a two‐level hierarchical structure with patients (level 1) nested within hospitals (level 2). Results Data were collected on 8909 patients undergoing cholecystectomy from 167 hospitals. Some 1451 cholecystectomies (16·3 per cent) were performed as an emergency, 4165 (46·8 per cent) as elective operations, and 3293 patients (37·0 per cent) had had at least one previous emergency admission, but had surgery on a delayed basis. The readmission and complication rates at 30 days were 7·1 per cent (633 of 8909) and 10·8 per cent (962 of 8909) respectively. Both readmissions and complications were independently associated with increasing ASA fitness grade, duration of surgery, and increasing numbers of emergency admissions with gallbladder disease before cholecystectomy. No identifiable hospital characteristics were linked to readmissions and complications. Conclusion Readmissions and complications following cholecystectomy are common and associated with patient and disease characteristics

The Cholecystectomy As A Day Case (CAAD) Score: A Validated Score of Preoperative Predictors of Successful Day-Case Cholecystectomy Using the CholeS Data Set

Background Day-case surgery is associated with significant patient and cost benefits. However, only 43% of cholecystectomy patients are discharged home the same day. One hypothesis is day-case cholecystectomy rates, defined as patients discharged the same day as their operation, may be improved by better assessment of patients using standard preoperative variables. Methods Data were extracted from a prospectively collected data set of cholecystectomy patients from 166 UK and Irish hospitals (CholeS). Cholecystectomies performed as elective procedures were divided into main (75%) and validation (25%) data sets. Preoperative predictors were identified, and a risk score of failed day case was devised using multivariate logistic regression. Receiver operating curve analysis was used to validate the score in the validation data set. Results Of the 7426 elective cholecystectomies performed, 49% of these were discharged home the same day. Same-day discharge following cholecystectomy was less likely with older patients (OR 0.18, 95% CI 0.15–0.23), higher ASA scores (OR 0.19, 95% CI 0.15–0.23), complicated cholelithiasis (OR 0.38, 95% CI 0.31 to 0.48), male gender (OR 0.66, 95% CI 0.58–0.74), previous acute gallstone-related admissions (OR 0.54, 95% CI 0.48–0.60) and preoperative endoscopic intervention (OR 0.40, 95% CI 0.34–0.47). The CAAD score was developed using these variables. When applied to the validation subgroup, a CAAD score of ≤5 was associated with 80.8% successful day-case cholecystectomy compared with 19.2% associated with a CAAD score >5 (p < 0.001). Conclusions The CAAD score which utilises data readily available from clinic letters and electronic sources can predict same-day discharges following cholecystectomy

Phantosmia: A neglected symptom after Dacryocystorhinostomy with intubation (A case report)

A 62-year-old female presented with complaints of persistent phantosmia (foul smell) for the last 4 months. She has a past history of right-sided dacryocystorhinostomy (DCR) 18 months back and left-sided DCR 12 months back. In the initial follow-up period, the patient had frequent visits to her otolaryngologist and ophthalmologist. She experienced phantosmia often but was reassured. The patient presented to us and was examined in an operation theater. It was discovered that the foul-smelling foreign body was present in her right nasal cavity above the middle turbinate. It was removed. A retained gauze piece was revealed to be a cause of phantosmia. The purpose of reporting is to create awareness among ophthalmologists and otolaryngologists. Retained gauze piece following DCR surgery presenting as phantosmia is a new symptom after DCR surgery previously not reported in the literature. Repeated complaints of a postoperative patient, should be dealt with vigilantly and timely

Finite Element Analysis of RC Beams Retrofitted and Strengthened with CFRP

This study aims to develop a finite element model for accurately predicting the behavior of RC beams retrofitted and strengthened with CFRP strips. Two types of CFRP layout are modelled, CFRP wraps at the bottom without any anchorage, and CFRP strips with CFRP wrap as anchorage. The developed numerical models are validated by experimentally testing RC beam models for four-point bending. The concrete damage plasticity model is used for introducing non-linearity in concrete. The non-linear tensile and compressive parameters are taken from the ABAQUS manual specifications. The interface between the CFRP and RC beam surface was replicated using a perfect bond between the two. The results show that the developed numerical model accurately predicts the strength of retrofitted and strengthened beams. Though numerical models show higher initial stiffnesses and cracking load, especially in the case of a retrofitted specimen, where the initial stiffness is as high as 75%