Macroevolutionary patterns in cranial and lower jaw shape of ceratopsian dinosaurs (dinosauria, ornithischia). phylogeny, morphological integration, and evolutionary rates

Organisms: Ceratopsians were herbivorous, beaked dinosaurs, ranging from 1 m to 9 m in body length, usually four-footed, and with a bony frill that extended backwards from the cranium over the nape of the neck. Known from Asia, Europe, and North America, they appeared in the Late Jurassic and persisted until the end of the Late Cretaceous. Questions: Which evolutionary processes drive the phenotypic evolution of skulls and lower jaws within Ceratopsia? What is the degree of morphological integration between the skull and lower jaw, and between the snout and frill among clades? Finally, are there any morphological evolution rate shifts across the ceratopsian phylogeny? Data: Photographs from 121 ceratopsian skulls and 122 lower jaws in lateral view, both from original photos and published pictures. Fifty-five ceratopsian species are represented in the sample. Methods: We investigated cranial and lower jaw shape changes across ceratopsians applying two-dimensional geometric morphometrics. We also investigated the morphological variation of the snout and the frill. Using phylogenetic generalized least squares regression, we estimated the degree of phylogenetic signal in size and shape data, as well as in the shape-size relationship. We performed phenotypic evolutionary rate analysis on shape data to describe phenotypic shifts across the phylogeny. Using a rarefied version of Escoufier's RV coefficient, we tested morphological integration between skulls and lower jaws, and between snouts and frills. Finally, we explored the potential link between cranial and frill shape evolution in ceratopsians and the radiation of angiosperms using a linear regression model. Results: Skull, snout, and frill shapes differ among clades (with the exception of leptoceratopsids and protoceratopsids). Lower jaws show distinct morphologies among groups. Size and shape changes are phylogenetically structured. The frill drives the morphological variation of the skull, co-varying much more with the lower jaw than with the snout. The frill appears to evolve to co-vary better with the lower jaw in the more morphologically derived clades than in basal ones. A significant linear relationship does exist between cranial shape and angiosperm occurrences, suggesting the hypothesis that the frill evolved in response to changes in dietary compositions associated with the turnover between gymnosperms and angiosperms during the Cretaceous. Significant negative shifts in evolutionary rates characterize skull, snout, frill, and lower jaw shapes, corresponding to nodes where psittacosaurids diverge from other taxa. In contrast, a significant positive shift in skull and snout shape rate of evolution characterizes the clade Ceratopsoidea. Conclusion: The frill is the main driving force in the overall cranial shape within Ceratopsia and evolved secondarily to better co-vary with the lower jaw to produce a more efficient masticatory apparatus. The changes in frill shape are correlated with the angiosperm diversification that occurred in the Cretaceous and thus correlated with changes in diet. Ceratopsians exhibit a slowdown in the phenotypic evolutionary rate in the Early Cretaceous and an acceleration of the phenotypic rate in the Late Cretaceous

Evidence of Combat in Triceratops

Background: The horns and frill of Triceratops and other ceratopsids (horned dinosaurs) are interpreted variously as display structures or as weapons against conspecifics and predators. Lesions (in the form of periosteal reactive bone, healing fractures, and alleged punctures) on Triceratops skulls have been used as anecdotal support of intraspecific combat similar to that in modern horned and antlered animals. If ceratopsids with different cranial morphologies used their horns in such combat, this should be reflected in the rates of lesion occurrence across the skull. Methodology/Principal Findings: We used a G-test of independence to compare incidence rates of lesions in Triceratops (which possesses two large brow horns and a smaller nasal horn) and the related ceratopsid Centrosaurus (with a large nasal horn and small brow horns), for the nasal, jugal, squamosal, and parietal bones of the skull. The two taxa differ significantly in the occurrence of lesions on the squamosal bone of the frill (P = 0.002), but not in other cranial bones (P.0.20). Conclusions/Significance: This pattern is consistent with Triceratops using its horns in combat and the frill being adapted as a protective structure for this taxon. Lower pathology rates in Centrosaurus may indicate visual rather than physical use o

Anatomy and Taxonomic Status of the Chasmosaurine Ceratopsid Nedoceratops hatcheri from the Upper Cretaceous Lance Formation of Wyoming, U.S.A

Background: The validity of Nedoceratops hatcheri, a chasmosaurine ceratopsid dinosaur known from a single skull recovered in the Lance Formation of eastern Wyoming, U.S.A., has been debated for over a century. Some have argued that the taxon is an aberrant Triceratops, and most recently it was proposed that N. hatcheri represents an intermediate ontogenetic stage between ‘‘young adult’ ’ and ‘‘old adult’ ’ forms of a single taxon previously split into Triceratops and Torosaurus. Methodology/Principal Findings: The holotype skull of Nedoceratops hatcheri was reexamined in order to map reconstructed areas and compare the specimen with other ceratopsids. Although squamosal fenestrae are almost certainly not of taxonomic significance, some other features are unique to N. hatcheri. These include a nasal lacking a recognizable horn, nearly vertical postorbital horncores, and relatively small parietal fenestrae. Thus, N. hatcheri is tentatively considered valid, and closely related to Triceratops spp. The holotype of N. hatcheri probably represents an ‘‘old adult,’ ’ based upon bone surface texture and the shape of the horns and epiossifications on the frill. In this study, Torosaurus is maintained as a genus distinct from Triceratops and Nedoceratops. Synonymy of the three genera as ontogenetic stages of a single taxon would require cranial changes otherwise unknown in ceratopsids, including additions of ossifications to the frill and repeated alternation of bone surface texture between juvenile and adult morphotypes

Common Functional Correlates of Head-Strike Behavior in the Pachycephalosaur Stegoceras validum (Ornithischia, Dinosauria) and Combative Artiodactyls

BACKGROUND: Pachycephalosaurs were bipedal herbivorous dinosaurs with bony domes on their heads, suggestive of head-butting as seen in bighorn sheep and musk oxen. Previous biomechanical studies indicate potential for pachycephalosaur head-butting, but bone histology appears to contradict the behavior in young and old individuals. Comparing pachycephalosaurs with fighting artiodactyls tests for common correlates of head-butting in their cranial structure and mechanics. METHODS/PRINCIPAL FINDINGS: Computed tomographic (CT) scans and physical sectioning revealed internal cranial structure of ten artiodactyls and pachycephalosaurs Stegoceras validum and Prenocephale prenes. Finite element analyses (FEA), incorporating bone and keratin tissue types, determined cranial stress and strain from simulated head impacts. Recursive partition analysis quantified strengths of correlation between functional morphology and actual or hypothesized behavior. Strong head-strike correlates include a dome-like cephalic morphology, neurovascular canals exiting onto the cranium surface, large neck muscle attachments, and dense cortical bone above a sparse cancellous layer in line with the force of impact. The head-butting duiker Cephalophus leucogaster is the closest morphological analog to Stegoceras, with a smaller yet similarly rounded dome. Crania of the duiker, pachycephalosaurs, and bighorn sheep Ovis canadensis share stratification of thick cortical and cancellous layers. Stegoceras, Cephalophus, and musk ox crania experience lower stress and higher safety factors for a given impact force than giraffe, pronghorn, or the non-combative llama. CONCLUSIONS/SIGNIFICANCE: Anatomy, biomechanics, and statistical correlation suggest that some pachycephalosaurs were as competent at head-to-head impacts as extant analogs displaying such combat. Large-scale comparisons and recursive partitioning can greatly refine inference of behavioral capability for fossil animals

‘Nedoceratops’: An Example of a Transitional Morphology

Background: The holotype and only specimen of the chasmosaurine ceratopsid dinosaur ‘Nedoceratops hatcheri ’ has been the source of considerable taxonomic debate since its initial description. At times it has been referred to its own genus while at others it has been considered synonymous with the contemporaneous chasmosaurine Triceratops. Most recently, the debate has focused on whether the specimen represents an intermediate ontogenetic stage between typical young adult Triceratops and the proposed mature morphology, which was previously considered to represent a distinct genus, ‘Torosaurus’. Methodology/Principal Findings: The only specimen of ‘Nedoceratops hatcheri ’ was examined and the proposed diagnostic features of this taxon were compared with other chasmosaurine ceratopsids. Every suggested autapomorphy of ‘Nedoceratops ’ is found in specimens of Triceratops. In this study, Triceratops includes the adult ‘Torosaurus ’ morphology. The small parietal fenestra and elongate squamosals of Nedoceratops are consistent with a transition from a short, solid parietalsquamosal frill to an expanded, fenestrated condition. Objections to this hypothesis regarding the number of epiossifications of the frill and alternations of bone surface texture were explored through a combination of comparative osteology and osteohistology. The synonymy of the three taxa was further supported by these investigations. Conclusions/Significance: The Triceratops, ‘Torosaurus’, and ‘Nedoceratops ’ morphologies represent ontogenetic variatio

The Importance of Craniofacial Sutures in Biomechanical Finite Element Models of the Domestic Pig

Craniofacial sutures are a ubiquitous feature of the vertebrate skull. Previous experimental work has shown that bone strain magnitudes and orientations often vary when moving from one bone to another, across a craniofacial suture. This has led to the hypothesis that craniofacial sutures act to modify the strain environment of the skull, possibly as a mode of dissipating high stresses generated during feeding or impact. This study tests the hypothesis that the introduction of craniofacial sutures into finite element (FE) models of a modern domestic pig skull would improve model accuracy compared to a model without sutures. This allowed the mechanical effects of sutures to be assessed in isolation from other confounding variables. These models were also validated against strain gauge data collected from the same specimen ex vivo. The experimental strain data showed notable strain differences between adjacent bones, but this effect was generally not observed in either model. It was found that the inclusion of sutures in finite element models affected strain magnitudes, ratios, orientations and contour patterns, yet contrary to expectations, this did not improve the fit of the model to the experimental data, but resulted in a model that was less accurate. It is demonstrated that the presence or absence of sutures alone is not responsible for the inaccuracies in model strain, and is suggested that variations in local bone material properties, which were not accounted for by the FE models, could instead be responsible for the pattern of results

Cranial Growth and Variation in Edmontosaurs (Dinosauria: Hadrosauridae): Implications for Latest Cretaceous Megaherbivore Diversity in North America

The well-sampled Late Cretaceous fossil record of North America remains the only high-resolution dataset for evaluating patterns of dinosaur diversity leading up to the terminal Cretaceous extinction event. Hadrosaurine hadrosaurids (Dinosauria: Ornithopoda) closely related to Edmontosaurus are among the most common megaherbivores in latest Campanian and Maastrichtian deposits of western North America. However, interpretations of edmontosaur species richness and biostratigraphy have been in constant flux for almost three decades, although the clade is generally thought to have undergone a radiation in the late Maastrichtian. We address the issue of edmontosaur diversity for the first time using rigorous morphometric analyses of virtually all known complete edmontosaur skulls. Results suggest only two valid species, Edmontosaurus regalis from the late Campanian, and E. annectens from the late Maastrichtian, with previously named taxa, including the controversial Anatotitan copei, erected on hypothesized transitional morphologies associated with ontogenetic size increase and allometric growth. A revision of North American hadrosaurid taxa suggests a decrease in both hadrosaurid diversity and disparity from the early to late Maastrichtian, a pattern likely also present in ceratopsid dinosaurs. A decline in the disparity of dominant megaherbivores in the latest Maastrichtian interval supports the hypothesis that dinosaur diversity decreased immediately preceding the end Cretaceous extinction event

Torosaurus Is Not Triceratops: Ontogeny in Chasmosaurine Ceratopsids as a Case Study in Dinosaur Taxonomy

Background: In horned dinosaurs, taxonomy is complicated by the fact that the cranial ornament that distinguishes species changes with age. Based on this observation, it has been proposed that the genera Triceratops and Torosaurus are in fact synonymous, with specimens identified as Torosaurus representing the adult form of Triceratops. The hypothesis of synonymy makes three testable predictions: 1) the species in question should have similar geographic and stratigraphic distributions, 2) specimens assigned to Torosaurus should be more mature than those assigned to Triceratops, and 3) intermediates should exist that combine features of Triceratops and Torosaurus. The first condition appears to be met, but it remains unclear whether the other predictions are borne out by the fossil evidence. Methodology/Principal Findings: We assessed the relative maturity of Torosaurus and Triceratops specimens by coding skulls for characters that vary with maturity, and then using a clustering analysis to arrange them into a growth series. We found that a well-defined sequence of changes exists in horned dinosaurs: development of cranial ornament occurs in juveniles, followed by fusion of the skull roof in subadults, and finally, the epoccipitals, epijugals, and rostral fuse to the skull in adults. Using this scheme, we identified mature and immature individuals of both Torosaurus and Triceratops. Furthermore, we describe the ventral depressions on the frill of Triceratops, and show that they differ in shape and position from the parietal fenestrae of Torosaurus. Thus, we conclude that these structures are not intermediates between the soli

A Nomenclature for Vertebral Fossae in Sauropods and Other Saurischian Dinosaurs

The axial skeleton of extinct saurischian dinosaurs (i.e., theropods, sauropodomorphs), like living birds, was pneumatized by epithelial outpocketings of the respiratory system. Pneumatic signatures in the vertebral column of fossil saurischians include complex branching chambers within the bone (internal pneumaticity) and large chambers visible externally that are bounded by neural arch laminae (external pneumaticity). Although general aspects of internal pneumaticity are synapomorphic for saurischian subgroups, the individual internal pneumatic spaces cannot be homologized across species or even along the vertebral column, due to their variability and absence of topographical landmarks. External pneumatic structures, in contrast, are defined by ready topological landmarks (vertebral laminae), but no consistent nomenclatural system exists. This deficiency has fostered confusion and limited their use as character data in phylogenetic analysis.We present a simple system for naming external neural arch fossae that parallels the one developed for the vertebral laminae that bound them. The nomenclatural system identifies fossae by pointing to reference landmarks (e.g., neural spine, centrum, costal articulations, zygapophyses). We standardize the naming process by creating tripartite names from “primary landmarks,” which form the zygodiapophyseal table, “secondary landmarks,” which orient with respect to that table, and “tertiary landmarks,” which further delineate a given fossa.The proposed nomenclatural system for lamina-bounded fossae adds clarity to descriptions of complex vertebrae and allows these structures to be sourced as character data for phylogenetic analyses. These anatomical terms denote potentially homologous pneumatic structures within Saurischia, but they could be applied to any vertebrate with vertebral laminae that enclose spaces, regardless of their developmental origin or phylogenetic distribution