Nematoxic effect of essential oils and their fractions against the pinewood nematode, Bursaphelenchus xylophilus

The pinewood nematode (PWN) Bursaphelenchus xylophilus is a highly pathogenic plant parasite that greatly affects pine forests. In Portugal, the most affected species is Pinus pinaster Aiton. Despite great efforts, since its fist detection in 1999, the PWN has spread through the country, including Madeira Island, having been recently detected in Spain [1,2]. Containing this pest is of the utmost importance for European pine forest safeguard. Since most synthetic chemicals used to control phytoparasites are toxic to humans and animals, and can accumulate in the soil and in food plants [3], in the present work, the nematoxic potential of over 80 essential oils (EOs), isolated from the Portuguese flora, were assessed against the PWN. EOs were isolated by hydrodistillation and analysed by GC and GC-MS [3]. EOs hydrocarbon and oxygen-containing fractions were obtained as in [4]. Direct-contact assays, adapted from [3], were performed by adding EOs/methanol stock-solutions to 50-100 mixed-stage PWN suspensions. After 24h in darkness, dead and live nematodes were counted under an inverted microscope. Assays were repeated at least 10 times in two series. Mortalities ≥96% were obtained with 2μL/mL of the EOs isolated from Cymbopogon citratus, Eucalyptus citriodora, Mentha arvensis, Origanum virens, Origanum vulgare, Ruta graveolens, Satureja montana, Syzygium aromaticum, Thymbra capitata, Thymus caespititius (carvacrol and/or thymol-rich), Thymus vulgaris and Thymus zygis. These EOs were further tested at 1, 0.5 and 0.25μL/mL. Minimum lethal concentrations (LC100) <0.4μL/mL, were obtained for the 2-undecanone-rich R. graveolens EO and the carvacrol and γ-terpinene-rich S. montana and T. capitata EOs. Assays with EO fractions revealed that the monoterpene-rich nematoxic EOs control PWN through their combined hydrocarbon and oxygen-containing fractions through additive and/or synergic relations. As complex mixtures of active components, EOs may prove to be effective nematoxic age nts

Influence of temperature on the electrochemical window of boron doped diamond: a comparison of commercially available electrodes

This work compares the electrochemical windows of polished and unpolished boron doped diamond (BDD) electrodes with hydrogen and oxygen terminations at a series of temperatures up to 125 °C. The experiment was run at 5 bar pressure to avoid complications due to bubble formation. An alternative method for determining the electrochemical window is compared to the most commonly used method, which defines the window at an arbitrary current density cut-off (Jcut-off) value. This arbitrary method is heavily influenced by the mass transport of the electrolyte and cannot be used to compare electrodes across literature where different Jcut-off values have been used. A linear fit method is described which is less affected by the experimental conditions in a given measurement system. This enables a more accurate comparison of the relative electrochemical window from various diamond electrode types from reported results. Through comparison of polished and unpolished BDD electrodes, with hydrogen and oxygen surface terminations, it is determined that the electrochemical window of BDD electrodes narrows as temperature increases; activation energies are reported

Phytochemicals as Biopesticides against the Pinewood Nematode Bursaphelenchus xylophilus: A Review on Essential Oils and Their Volatiles

The impacts of a rapidly changing environment together with the growth in global trade activities has promoted new plant pest pandemic events in forest ecosystems. The pinewood nematode (PWN), Bursaphelenchus xylophilus, causes strong worldwide economic and ecological impacts. Direct control is performed through trunk injection of powerful nematicides, however many of these (hemi)synthetic compounds have raised ecological and human health concerns for affecting non-target species and accumulating in food products. As sustainable alternatives, essential oils (EOs) have shown very promising results. In this work, available literature on the direct activity of EOs against PWN is reviewed, as a contribution to advance the search for safer and greener biopesticides to be used in sustainable PWD pest management strategies. For the first time, important parameters concerning the bioassays performed, the PWNs bioassayed, and the EOs used are summarized and comparatively analyzed. Ultimately, an overview of the chemical composition of the most active EOs allowed to uncover preliminary guidelines for anti-PWN EO efficiency. The analysis of important information on the volatile phytochemicals composing nematicidal EOs provides a solid basis to engineer sustainable biopesticides capable of controlling the PWN under an integrated pest management framework and contributes to improved forest health

Polarization in Strong-Field Ionization of Excited Helium

We analyze how bound-state excitation, electron exchange and the residual binding potential influence above-threshold ionization (ATI) in helium prepared in an excited p state, oriented parallel and perpendicular to a linearly polarized mid-IR field. Using the ab initio B-spline algebraic diagrammatic construction, and several one-electron methods with effective potentials, including the Schrödinger solver Qprop, modified versions of the strong-field approximation (SFA) and the Coulomb quantum-orbit strong-field approximation, we find that these specific physical mechanisms leave significant imprints in ATI spectra and photoelectron momentum distributions. Examples are changes of up to two orders of magnitude in the high-energy photoelectron region, and ramp-like structures that can be traced back to Coulomb-distorted trajectories. The present work also shows that electron exchange renders rescattering less effective, causing suppressions in the ATI plateau. Due to the long-range potential, the electron continuum dynamics are no longer confined to the polarization axis, in contrast to the predictions of traditional approaches. Thus, one may in principle probe excited-state configurations perpendicular to the driving-field polarization without the need for orthogonally polarized fields

In vitro and in vivo characterization of PLLA-316L stainless steel electromechanical devices for bone tissue engineering—A preliminary study

Bone injuries represent a major social and financial impairment, commonly requiring surgical intervention due to a limited healing capacity of the tissue, particularly regarding critical-sized defects and non-union fractures. Regenerative medicine with the application of bone implants has been developing in the past decades towards the manufacturing of appropriate devices. This work intended to evaluate medical 316L stainless steel (SS)-based devices covered by a polymer poly (L-lactic acid) (PLLA) coating for bone lesion mechanical and functional support. SS316L devices were subjected to a previously described silanization process, following a three-layer PLLA film coating. Devices were further characterized and evaluated towards their cytocompatibility and osteogenic potential using human dental pulp stem cells, and biocompatibility via subcutaneous implantation in a rat animal model. Results demonstrated PLLA-SS316L devices to present superior in vitro and in vivo outcomes and suggested the PLLA coating to provide osteo-inductive properties to the device. Overall, this work represents a preliminary study on PLLA-SS316L devices’ potential towards bone tissue regenerative techniques, showing promising outcomes for bone lesion support.This work was developed within the scope of the project CICECO-Aveiro Institute of Materials, FCT Ref. UID/CTM/50011/2019, financed by national funds through the FCT/MCTES and when appropriate co-financed by FEDER under the PT2020 Partnership Agreement. This work was also financed by Portugal 2020 through the European Regional Development Fund (ERDF), in the frame of Operational Competitiveness and Internationalization Programme (POCI), in the scope of the project “Advanced BioMEMs for tissue engineering: Applications in hard tissue (BioMEMs)”, POCI-01-0145-FEDER-032095. Mariana Vieira Branquinho (SFRH/BD/146172/2019), Ana Catarina Sousa (SFRH/BD/146689/2019), and Rui Damásio Alvites (SFRH/BD/116118/2016), acknowledge FCT, for financial support

In vitro co-culture of Solanum tuberosum hairy roots with Meloidogyne chitwoodi: structure, growth and production of volatiles

Meloidogyne spp., commonly known as root- knot nematodes (RKNs), are economically important plant sedentary endoparasites that cause galls on susceptible hosts. The Columbia root-knot nematode (CRKN), M. chitwoodi, is a quarantine A2 type pest by the European and Mediterranean Plant Protection Organization since 1998. This nematode has been found associated with economi- cally important crops such as potato and tomato, causing severe damage and making the agricultural products unac- ceptable for the fresh market and food processing. In vitro co-culture of host and parasite offers an advantageous experimental system for studying plant-RKN interactions. The structure, growth and production of volatiles of Sola- num tuberosum hairy roots (HR) and of S. tuberosum HR/ CRKN co-cultures were compared. HR were induced by inoculation of aseptic potato tuber segments with Rhizo- bium rhizogenes. Co-cultures were initiated by inoculating HR with sterilized CRKN eggs. Infection with CRKN induced the RKN symptomatology in the HR and several nematode life stages were observed by light and scanning electron microscopy. Potato HR and HR/CRKN co-culturesexhibited similar growth patterns, evaluated by measuring fresh and dry weight and by the dissimilation method. Volatiles, isolated by distillation–extraction and analyzed by gas chromatography (GC) and gas chromatography coupled to mass spectrometry, revealed that palmitic acid (37–52 %), n–pentadecanal (10–16 %) and linoleic acid (2–16 %) were the main constitutive components of S. tu- berosum HR, and of the HR/CRKN co-cultures (24–44, 8–22 and 4–18 %, respectively). S. tuberosum HR/CRKN co-cultures can be considered a suitable biotechnological tool to study RKN infection mechanism by mimicking what occurs under field conditions

Mesenchymal Stem/ Stromal Cells metabolomic and bioactive factors profiles: A comparative analysis on the umbilical cord and dental pulp derived Stem/ Stromal Cells secretome

Mesenchymal Stem/ Stromal Cells assume a supporting role to the intrinsic mechanisms of tissue regeneration, a feature mostly assigned to the contents of their secretome. A comparative study on the metabolomic and bioactive molecules/factors content of the secretome of Mesenchymal Stem/ Stromal Cells derived from two expanding sources: the umbilical cord stroma and the dental pulp is presented and discussed. The metabolic profile (Nuclear Magnetic Resonance Spectroscopy) evidenced some differences in the metabolite dynamics through the conditioning period, particularly on the glucose metabolism. Despite, overall similar profiles are suggested. More prominent differences are highlighted for the bioactive factors (Multiplexing Laser Bear Analysis), in which Follistatin, Growth Regulates Protein, Hepatocyte Growth Factor, Interleukin-8 and Monocyte Chemotactic Protein-1 dominate in Umbilical Cord Mesenchymal Stem/ Stromal Cells secretion, while in Dental Pulp Stem/ Stromal Cells the Vascular Endothelial Growth Factor-A and Follistatin are more evident. The distinct secretory cocktail did not result in significantly different effects on endothelial cell populations dynamics including proliferation, migration, tube formation capacity and in vivo angiogenesis, or in chemotaxis for both Mesenchymal Stem/ Stromal Cells populations.This research was supported by Programa Operacional Regional do Norte (ON.2 - O Novo Norte), QREN, FEDER with the project "iBone Therapies: Terapias inovadoras para a regeneração óssea", ref. NORTE-01-0247-FEDER-003262, and by the program COMPETE - Programa Operacional Factores de Competitividade, Projects PEst-OE/AGR/UI0211/ 2011 and PEst-C/EME/UI0285/2013 funding from FCT. This research was also supported by Programa Operacional Competitividade e Internacionalização (P2020), Fundos Europeus Estruturais e de Investimento (FEEI) and FCT with the project "BioMate - A novel bio-manufacturing system to produce bioactive scaffolds for tissue engineering" with reference PTDC/EMS-SIS/7032/ 2014 and by COMPETE 2020, from ANI - Projetos ID&T Empresas em Copromoção, Programas Operacionais POCI, by the project "insitu.Biomas - Reinvent biomanufacturing systems by using an usability approach for in situ clinic temporary implants fabrication? with the reference POCI-01-0247-FEDER-017771. This work received further financial support from the framework of QREN through Project NORTE-07-0124-FEDER-000066. The Bruker Avance III 600 HD spectrometer was purchased under the framework of QREN, through Project NORTE-07-0162-FEDER-000048 and is part of the Portuguese NMR Network created with support of FCT through Contract REDE/1517/RMN/ 2005, with funds from POCI 2010 (FEDER). Ana Rita Caseiro (SFRH/BD/101174/2014) acknowledges FCT, for financial support. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript

Human paraoxonase gene polymorphisms and coronary artery disease risk.

Introdução: As doenças complexas como a doença das artérias coronárias (DAC), a hipertensão e a diabetes, são usualmente causadas pela susceptibilidade individual a múltiplos genes, factores ambientais e pela interacção entre eles. As enzimas da paraoxonase humana (PON), particularmente a PON1, têm sido implicadas na patogenia da aterosclerose e da DAC. Dois polimorfismos comuns na região codificante do gene, com substituição Glutamina (Q) /Arginina (R) na posição 192 e Leucina /Metionina na posição 55 influenciam a actividade da PON1. Vários estudos têm investigado a associação entre os polimorfismos da PON1 e a DAC, com resultados contraditórios. Objectivo: 1- Avaliar a associação dos polimorfismos da PON1 com o risco de DAC. 2-Estudar a interacção destes polimorfismos com outros situados em genes candidatos diferentes, na susceptibilidade para o aparecimento da DAC. Material e Métodos: Estudámos em 298 doentes coronários e 298 controlos saudáveis, através de um estudo caso/controlo, o risco de DAC associado aos polimorfismos da PON1, 192Q/R e 55L/M. Numa segunda fase avaliámos o risco das interacções polimórficas PON1 192 RR + MTHFR 1298 AA; PON1 192 R/R + ECA DD; PON1 192 R/R + ECA 8 GG. Finalmente construímos um modelo de regressão logística (no qual entraram todas as variáveis genéticas, ambientais e bioquímicas, que tinham mostrado significância estatística na análise univariada), para determinar quais as que se relacionavam de forma significativa e independente com DAC. Resultados: Verificámos que o genótipo PON1 55 MM tinha uma distribuição superior na população doente mas não atingia significância estatística como factor de risco para DAC. O PON1 199 RR apresentou um risco relativo 80% superior relativamente à população que o não possuía (p=0,04). A interacção da PON1 192 RR e da MTHFR 1298 AA, polimorfismos sedeados em genes diferentes, apresentou um risco relativo de DAC de 2,76 (OR=2,76;IC=1,20- 6,47; P=0,009), bastante superior ao risco de cada polimorfismo isolado, assim como a associação da PON1 RR + ECA DD (com polimorfismos também sedeados em genes diferentes), que apresentou um risco 337% superior relativamente aos que não possuíam esta associação (OR=4,37;IC=1,47- 13,87; P=0,002). Da mesma forma a associação entre a PON1 RR e ECA 8 GG, revelou um risco ainda mais elevado (OR=6;23; IC=1,67- 27,37; P<0,001). Após modelo de Regressão Logística as variáveis que ficaram na equação representando factores de risco significativos e independentes para DAC, foram os hábitos tabágicos, doença familiar, diabetes, fibrinogénio, Lp (a) e a associação PON1 192 RR + ECA 8 GG. Esta última associação apresentou, na regressão logística, um OR=14,113; p=0,018 Conclusões: O genótipo PON1 192 RR apresentou, se avaliado isoladamente, um risco relativo de DAC 80% superior relativamente à população que não possuía este genótipo. A associação deste polimorfismo com outros polimorfismos sedeados em genes diferentes, codificando para diferentes enzimas e pertencendo a sistemas fisiopatológicos distintos (MTHFR1298 AA, ECA DD e ECA 8 GG), aumentou sempre o risco de eclosão da DAC. Após correcção para os outros factores de risco clássicos e bioquímicos, a associação PON1 192 RR + ECA 8 GG, continuou a ser um factor de risco significativo e independente para CAD.BACKGROUND: Complex diseases such as coronary artery disease (CAD), hypertension and diabetes are usually caused by individual susceptibility to multiple genes, environmental factors, and the interaction between them. The paraoxonase 1 (PON1) enzyme has been implicated in the pathogenesis of atherosclerosis and CAD. Two common polymorphisms in the coding region of the PON1 gene, which lead to a glutamine (Q)/arginine (R) substitution at position 192 and a leucine (L)/methionine (M) substitution at position 55, influence PON1 activity. Studies have investigated the association between these polymorphisms and CAD, but with conflicting results. AIMS: 1) To evaluate the association between PON1 polymorphisms and CAD risk; and 2) to study the interaction between PON1 polymorphisms and others in different candidate genes. METHODS: We evaluated the risk of CAD associated with PON1 Q192R and L55M polymorphisms in 298 CAD patients and 298 healthy individuals. We then evaluated the risk associated with the interaction of the PON1 polymorphisms with ACE DD, ACE 8 GG and MTHFR 1298AA. Finally, using a logistic regression model, we evaluated which variables (genetic, biochemical and environmental) were linked significantly and independently with CAD. RESULTS: We found that the PON1 55MM genotype was more common in the CAD population, but this did not reach statistical significance as a risk factor for CAD, while PON1 192RR presented an 80% higher relative risk compared to the population without this polymorphism. The interaction between PON1 192RR and MTHFR 1298AA, sited in different genes, increased the risk for CAD, compared with the polymorphisms in isolation (OR=2.76; 95% CI=1.20-6.47; p=0.009), as did the association of PON1 192RR with ACE DD, which presented a 337% higher risk compared to the population without this polymorphic association (OR=4.37; 95% CI=1.47-13.87; p=0.002). Similarly, the association between PON1 192RR and ACE 8 GG was linked to an even higher risk (OR=6.23; 95% CI=1.67-27.37; p<0.001). After logistic regression, smoking, family history, fibrinogen, diabetes, Lp(a) and the association of PON1 192RR + ACE 8 GG remained in the regression model and proved to be significant and independent risk factors for CAD. In the regression model the latter association had OR=14.113; p=0.018. CONCLUSION: When analyzed separately, the PON1 192RR genotype presented a relative risk for CAD 80% higher than in the population without this genotype. Its association with other genetic polymorphisms sited in different genes, coding for different enzymes and belonging to different physiological systems, always increased the risk for CAD. After correction for other conventional and biochemical risk factors, the PON1 192RR + ACE 8 GG association remained a significant and independent risk factor for CAD.info:eu-repo/semantics/publishedVersio

Use of construction and demolition recycled materials (C&Drm) in road pavements validated on experimental test sections

The construction activity usually generates large amounts of waste from different sources and processes. Due to the increasing shortage of space for landfill implementation and the costs associated with waste control regulations, derived from its ever increasing environmental protection requirements, the most desirable alternative is the reduction of construction and demolition waste volumes by means of their reuse and recycling. A research project, SUPREMA - Sustainable Application of Construction and Demolition Recycled Materials (C&DRM) in Road Infrastructures, is being developed by the National Laboratory for Civil Engineering (LNEC), and by the University of Lisbon (IST). This project seeks to contribute to the sustainable implementation of C&DRM in road pavements by improving the knowledge of the physical, mechanical and environmental behaviour of these materials when placed as aggregates in unbound pavement layers. Besides a general presentation of the research project and the construction procedures of a test pit structure where four different materials were applied, this paper presents some results related to the characteristics of the studied materials, supported by laboratory and by in situ tests performed with the FWD in the test pit structure. It was concluded that all materials demonstrate an acceptable structural performance