Scale-Up and On-Line Monitoring of Gas-Solid Systems using Advanced and Non-Invasive Measurement Techniques

Industry relies on gas-solid systems for numerous processes. Flow dynamics play an important role in achieving the desired results. The present study proposes, validates and demonstrates a novel mechanistic scale-up approach based on maintaining similar radial profile or cross sectional distribution of gas holdup in two different gas-solid systems in order to achieve hydrodynamics similarity using advanced measurement techniques. This new methodology for scale-up and design has been implemented on gas-solid spouted bed which has been used for drying, granulation and coating. The development can be extrapolated to other gas-solid systems encountered in phosphate processes

Assessment of the Dimensionless Groups-Based Scale-Up of Gas–Solid Fluidized Beds

The most common scale-up approach for gas–solids fluidized beds is based on matching the governing dimensionless parameters. In the literature, this approach has been validated only by means of measuring global parameters between different sizes of fluidized beds. However, such global measurements are not sufficient to depict all the interplaying hydrodynamic phenomena and hence verify the scale-up relationships. Therefore, to assess this approach, an advanced gas–solids optical probe and pressure transducer measurement techniques have been applied to quantify local hydrodynamic parameters in two different sized fluidized beds. Four different sets of experimental conditions were designed and conducted to examine the assessment of the scaling approach with matched and mismatched dimensionless groups between the two beds. The results indicated that the reported dimensionless groups are not adequate for achieving similarity between the two gas–solids fluidized beds in terms of solids holdup, gas holdup, particle velocity, mass flux, and pressure fluctuation. This finding demonstrates the importance of local measurements of the hydrodynamic parameters of fluidized beds in order to evaluate scale-up relationships. Finally, the results further advance the understanding of the gas–solids fluidized beds and present deeper insight into their solids dynamics

Short Term Effectiveness of Gamma Knife Radiosurgery in the Management of Brain Arteriovenous Malformation

AIM: To evaluate the short-term effectiveness of Gamma knife radiosurgery as a modality of treatment of brain arteriovenous malformation. METHODS: Sixty-three patients with arteriovenous brain malformations underwent Gamma knife radiosurgery included in this prospective study between April 2017 and September 2018 with clinical and radiological with MRI follow up was done at three months and six months post-Gamma knife radiosurgery. By the end of the 12th-month post-Gamma knife radiosurgery, the patients were re-evaluated using digital subtraction angiography co-registered with M.R.I. During the 12 months follow up, CT scan or MRI was done at any time if any one of the patients᾽ condition deteriorated or developed signs and symptoms of complications. The mean volume of the arteriovenous malformations treated was 26.0 ± 5 cm3 (range 12.5–39.5 cm3) in The Neurosciences Hospital, Baghdad/Iraq. RESULTS: By the end of the 12th month of follow up, the overall obliteration of the arteriovenous malformations was seen in six patients only (9.5%), while shrinkage was noticed in 57 patients (90.5%). Improvement or clinical stability was found in 24 out of 39 patients (61.5%) presented with epilepsy as a chief complaint before Gamma knife radiosurgery and 21 out of 24 patients (87.0%) complained of a headache before Gamma knife radiosurgery. Post-Gamma knife radiosurgery bleeding was found in only three patients (5.0%). CONCLUSION: Even with the short term follow up, Gamma knife radiosurgery has an excellent clinical outcome in most patients with arteriovenous brain malformations. The clinical symptoms like headache and seizure were either diminished or controlled with the same medical treatment dose before Gamma knife radiosurgery. Long term clinical and radiological follow up is recommended

Functional Outcome Following Synthetic Vertebral Body Implantation in the Management of Spinal Disorders

OBJECTIVE: Synthetic vertebral body replacement has been widely used recently to treat different spinal conditions affecting the anterior column. They arrange from trauma, infections, and even tumor conditions. In this study, we assess the functional outcome of this modality in different spinal conditions. PATIENTS AND METHODS: Thirty-six cases operated from October 2010 to December 2017. Twelve patients had spinal type A3 fractures, 11 cases with spinal tuberculosis (TB), and 13 cases with spinal tumors. They were followed clinically for a mean period of 2.4 years. RESULTS: All the cases were approached anteriorly. Seven cases had a post-operative infection. No neurological worsening reported. We had dramatic neurological improvement in all spinal TB cases. Mortality recorded in only 4 cases with metastatic spinal tumor during the mean period of follow-up. Karnofsky performance status scale showed statistically significant change for spinal TB, and tumor cases during the follow-up period, but there was no significant change in cases of spinal type A3 fractures. CONCLUSION: The positive outcome of this surgery makes it recommended for properly selected patients, especially with spinal TB and tumors

Measurement and interpretation of same-sign W boson pair production in association with two jets in pp collisions at s = 13 TeV with the ATLAS detector

This paper presents the measurement of fducial and diferential cross sections for both the inclusive and electroweak production of a same-sign W-boson pair in association with two jets (W±W±jj) using 139 fb−1 of proton-proton collision data recorded at a centre-of-mass energy of √s = 13 TeV by the ATLAS detector at the Large Hadron Collider. The analysis is performed by selecting two same-charge leptons, electron or muon, and at least two jets with large invariant mass and a large rapidity diference. The measured fducial cross sections for electroweak and inclusive W±W±jj production are 2.92 ± 0.22 (stat.) ± 0.19 (syst.)fb and 3.38±0.22 (stat.)±0.19 (syst.)fb, respectively, in agreement with Standard Model predictions. The measurements are used to constrain anomalous quartic gauge couplings by extracting 95% confdence level intervals on dimension-8 operators. A search for doubly charged Higgs bosons H±± that are produced in vector-boson fusion processes and decay into a same-sign W boson pair is performed. The largest deviation from the Standard Model occurs for an H±± mass near 450 GeV, with a global signifcance of 2.5 standard deviations

Studies of new Higgs boson interactions through nonresonant HH production in the b¯bγγ fnal state in pp collisions at √s = 13 TeV with the ATLAS detector

A search for nonresonant Higgs boson pair production in the b ¯bγγ fnal state is performed using 140 fb−1 of proton-proton collisions at a centre-of-mass energy of 13 TeV recorded by the ATLAS detector at the CERN Large Hadron Collider. This analysis supersedes and expands upon the previous nonresonant ATLAS results in this fnal state based on the same data sample. The analysis strategy is optimised to probe anomalous values not only of the Higgs (H) boson self-coupling modifer κλ but also of the quartic HHV V (V = W, Z) coupling modifer κ2V . No signifcant excess above the expected background from Standard Model processes is observed. An observed upper limit µHH < 4.0 is set at 95% confdence level on the Higgs boson pair production cross-section normalised to its Standard Model prediction. The 95% confdence intervals for the coupling modifers are −1.4 < κλ < 6.9 and −0.5 < κ2V < 2.7, assuming all other Higgs boson couplings except the one under study are fxed to the Standard Model predictions. The results are interpreted in the Standard Model efective feld theory and Higgs efective feld theory frameworks in terms of constraints on the couplings of anomalous Higgs boson (self-)interactions

Model-independent search for the presence of new physics in events including H → γγ with s \sqrt{s} = 13 TeV pp data recorded by the ATLAS detector at the LHC

Abstract A model-independent search for new physics leading to final states containing a Higgs boson, with a mass of 125.09 GeV, decaying to a pair of photons is performed with 139 fb−1 of s $$\sqrt{s}$$ = 13 TeV pp collision data recorded by the ATLAS detector at the Large Hadron Collider at CERN. This search examines 22 final states categorized by the objects that are produced in association with the Higgs boson. These objects include isolated electrons or muons, hadronically decaying τ-leptons, additional photons, missing transverse momentum, and hadronic jets, as well as jets that are tagged as containing a b-hadron. No significant excesses above Standard Model expectations are observed and limits on the production cross section at 95% confidence level are set. Detector efficiencies are reported for all 22 signal regions, which can be used to convert detector-level cross-section limits reported in this paper to particle-level cross-section constraints

Search for neutral long-lived particles in pp collisions at √s = 13 TeV that decay into displaced hadronic jets in the ATLAS calorimeter

A search for decays of pair-produced neutral long-lived particles (LLPs) is presented using 139 fb−1 of proton-proton collision data collected by the ATLAS detector at the LHC in 2015–2018 at a centre-of-mass energy of 13 TeV. Dedicated techniques were developed for the reconstruction of displaced jets produced by LLPs decaying hadronically in the ATLAS hadronic calorimeter. Two search regions are defined for different LLP kinematic regimes. The observed numbers of events are consistent with the expected background, and limits for several benchmark signals are determined. For a SM Higgs boson with a mass of 125 GeV, branching ratios above 10% are excluded at 95% confidence level for values of c times LLP mean proper lifetime in the range between 20 mm and 10 m depending on the model. Upper limits are also set on the cross-section times branching ratio for scalars with a mass of 60 GeV and for masses between 200 GeV and 1 TeV. [Figure not available: see fulltext.

Combination of searches for invisible decays of the Higgs boson using 139 fb−1 of proton-proton collision data at root s=13 TeV collected with the ATLAS experiment

Many extensions of the Standard Model predict the production of dark matter particles at the LHC. Sufficiently light dark matter particles may be produced in decays of the Higgs boson that would appear invisible to the detector. This Letter presents a statistical combination of searches for H→invisible decays where multiple production modes of the Standard Model Higgs boson are considered. These searches are performed with the ATLAS detector using 139 fb−1of proton–proton collisions at a centre–of–mass energy of √s=13TeV at the LHC. In combination with the results at √s=7TeV and 8TeV, an upper limit on the H→invisible branching ratio of 0.107 (0.077) at the 95% confidence level is observed (expected). These results are also interpreted in the context of models where the 125GeV Higgs boson acts as a portal to dark matter, and limits are set on the scattering cross-section of weakly interacting massive particles and nucleons