Good rectifying characteristic in p–n junctions composed of La0.67Ca0.33MnO3-δ/Nb–0.7 wt %-doped SrTiO3

Simple p–n junctions have been fabricated using a simple heteroepitaxial structure of La0.67Ca0.33MnO3–/Nb-doped SrTiO3. In such junctions, the La0.67Ca0.33MnO3– exhibits semiconductor behavior due to oxygen deficiency, whereas the Nb–0.7 wt %-doped SrTiO3 shows a metal behavior. These junctions demonstrate good rectifying characteristic in a wide temperature range from 5 to 350 K. An intriguing observation is that the rectifying behavior is nearly independent of temperature. © 2003 American Institute of Physics.published_or_final_versio

Super-resolution time delay estimation in multipath environments

The problem of super-resolution time delay estimation in multipath environments is addressed in this paper. Two cases, active and passive systems, are considered. The time delay estimation is first converted into a sinusoidal parameter estimation problem. Then the sinusoidal parameters are estimated by generalizing the Multiple Signal Classification (MUSIC) algorithm for single-experiment data. The proposed method, referred to as the MUSIC-type algorithm, approximates the Cramer-Rao bound (CRB) in terms of the mean square errors (MSEs) for different signal-to-noise ratios (SNRs) and separations of muitipath components. Simulation results show that the MUSIC-type algorithm performs better than the classical correlation approach and the conventional MUSIC method for the closely spaced components in muitipath environments.published_or_final_versio

Iterative CZT-based frequency offset estimation for frequency-selective channels

In this paper, we present an accurate frequency offset estimation method for frequency-selective channels. Through the iterative use of the chirp z-transform (CZT) algorithm, an accurate frequency offset estimator is proposed, approaching the Cramer-Rao Bound (CRB) even at low signal-to-noise ratio (SNR). Further, the estimation can be achieved within one block of training sequence, thus avoiding the transmission of repetitive known blocks as is usually required in many conventional methods. Meanwhile, the overall complexity is acceptable. More importantly, the CZT operation can utilize the fast Fourier transform (FFT) structure that is favourable for digital signal processor (DSP) implementation. Simulation results show that two or at most three iterations of the CZT computation are sufficient for an accurate frequency offset estimation in the SNR range from 0 dB to 30 dB. © 2005 IEEE.published_or_final_versio

Magnetocaloric effect in itinerant electron metamagnetic systems La(Fe1-xCox)11.9Si1.1

The NaZn13-type compounds La(Fe1–xCox)11.9Si1.1 (x=0.04, 0.06, 0.08) were successfully synthesized, in which the Si content is the limit that can be reached by arc-melting technique. TC is tunable from 243 to 301 K with Co doping from x=0.04 to 0.08. Great magnetic entropy change S in a wide temperature range from ~230 to ~320 K has been observed. The adiabatic temperature change Tad upon changing magnetic field was also directly measured. Tad of sample x=0.06 reaches ~2.4 K upon a field change from 0 to 1.1 T. The temperature hysteresis upon phase transition is small, ~1 K, for all samples. The influence of Co doping on itinerant electron metamagnetic transition and magnetic entropy change is discussed. ©2005 American Institute of Physics.published_or_final_versio

Magnetoresistance in LaFe11.2Co0.7Si1.1 compound

Magnetoresistance has been studied in LaFe/sub 11.2/Co/sub 0.7/Si/sub 1.1/ compound. The ferromagnetic ordering at Curie temperature T/sub C/ of 274 K was found being accompanied by a drastic negative lattice expansion due to the strong structural and magnetic interplay. Such a simultaneous magnetic and lattice change would cause changes in transport properties. The measured transport properties indicate that the transition can be induced by temperature or applied magnetic field. The sample shows a metallic character below T/sub C/, whereas the electrical resistance decreases dramatically and then recovers the metal-like behavior above T/sub C/. Application of a magnetic field retains the transitions via increasing the ferromagnetic ordering temperature. An isothermal increase of field leads to an increase of resistance at temperatures near but above T/sub C/, which is a result of the field-induced metamagnetic transition from paramagnetic to ferromagnetic state.published_or_final_versio

Lasing microbottles

Lasing of an optical microbottle resonator at predetermined resonant wavelengths is feasible via spatial engineering of the pump laser beam

Explosive Nucleosynthesis: What we learned and what we still do not understand

This review touches on historical aspects, going back to the early days of nuclear astrophysics, initiated by B$^2$FH and Cameron, discusses (i) the required nuclear input from reaction rates and decay properties up to the nuclear equation of state, continues (ii) with the tools to perform nucleosynthesis calculations and (iii) early parametrized nucleosynthesis studies, before (iv) reliable stellar models became available for the late stages of stellar evolution. It passes then through (v) explosive environments from core-collapse supernovae to explosive events in binary systems (including type Ia supernovae and compact binary mergers), and finally (vi) discusses the role of all these nucleosynthesis production sites in the evolution of galaxies. The focus is put on the comparison of early ideas and present, very recent, understanding.Comment: 11 pages, to appear in Springer Proceedings in Physics (Proc. of Intl. Conf. "Nuclei in the Cosmos XV", LNGS Assergi, Italy, June 2018

Type Ia Supernovae as Stellar Endpoints and Cosmological Tools

Empirically, Type Ia supernovae are the most useful, precise, and mature tools for determining astronomical distances. Acting as calibrated candles they revealed the presence of dark energy and are being used to measure its properties. However, the nature of the SN Ia explosion, and the progenitors involved, have remained elusive, even after seven decades of research. But now new large surveys are bringing about a paradigm shift --- we can finally compare samples of hundreds of supernovae to isolate critical variables. As a result of this, and advances in modeling, breakthroughs in understanding all aspects of SNe Ia are finally starting to happen.Comment: Invited review for Nature Communications. Final published version. Shortened, update

Dynamical Mean-Field Theory

The dynamical mean-field theory (DMFT) is a widely applicable approximation scheme for the investigation of correlated quantum many-particle systems on a lattice, e.g., electrons in solids and cold atoms in optical lattices. In particular, the combination of the DMFT with conventional methods for the calculation of electronic band structures has led to a powerful numerical approach which allows one to explore the properties of correlated materials. In this introductory article we discuss the foundations of the DMFT, derive the underlying self-consistency equations, and present several applications which have provided important insights into the properties of correlated matter.Comment: Chapter in "Theoretical Methods for Strongly Correlated Systems", edited by A. Avella and F. Mancini, Springer (2011), 31 pages, 5 figure