Population expansion in the North African Late Pleistocene signalled by mitochondrial DNA haplogroup U6

Background <br/> The archaeology of North Africa remains enigmatic, with questions of population continuity versus discontinuity taking centre-stage. Debates have focused on population transitions between the bearers of the Middle Palaeolithic Aterian industry and the later Upper Palaeolithic populations of the Maghreb, as well as between the late Pleistocene and Holocene. <br/> Results Improved resolution of the mitochondrial DNA (mtDNA) haplogroup U6 phylogeny, by the screening of 39 new complete sequences, has enabled us to infer a signal of moderate population expansion using Bayesian coalescent methods. To ascertain the time for this expansion, we applied both a mutation rate accounting for purifying selection and one with an internal calibration based on four approximate archaeological dates: the settlement of the Canary Islands, the settlement of Sardinia and its internal population re-expansion, and the split between haplogroups U5 and U6 around the time of the first modern human settlement of the Near East. <br/> Conclusions <br/> A Bayesian skyline plot placed the main expansion in the time frame of the Late Pleistocene, around 20 ka, and spatial smoothing techniques suggested that the most probable geographic region for this demographic event was to the west of North Africa. A comparison with U6's European sister clade, U5, revealed a stronger population expansion at around this time in Europe. Also in contrast with U5, a weak signal of a recent population expansion in the last 5,000 years was observed in North Africa, pointing to a moderate impact of the late Neolithic on the local population size of the southern Mediterranean coast

Nitrogen source on performance of feedlot young bulls fed hydrolyzed sugarcane bagasse diets

Oitenta e um machos não castrados das raças Nelore (27), Canchim (27) e Holandesa (27), com peso médio inicial de 360kg e idade média de 18 meses, foram utilizados para avaliar os efeitos da substituição de fonte de proteína verdadeira (farelo de soja), por nitrogênio não protéico (NNP), uréia ou amiréia (fonte de nitrogênio não protéico de suposta liberação gradativa) sobre o desempenho de bovinos confinados. O delineamento experimental foi o de blocos inteiramente ao acaso com três animais por baia e nove baias por tratamento. Os blocos foram delineados de acordo com o peso inicial e na raça. As rações experimentais continham BTPV (45% MS da dieta) e BIN (5% MS da dieta) como fontes de volumosos e 50% de concentrado. Os tratamentos consistiam de: 1) concentrado contendo farelo de soja (FS); 2) concentrado contendo uréia e 3) concentrado contendo amiréia (A-150S). O consumo de matéria seca (CMS) foi de 8,99; 7,43 e 7,69kg/dia, o ganho de peso diário (GPD) foi de 0,983; 0,368 e 0,404kg/dia e a conversão alimentar (CA) 9,56; 20,14 e 19,54kg MS/kg de ganho para os tratamentos FS, uréia e A-150S, respectivamente. As rações com FS apresentaram proporcionalmente maior (P<0,01) CMS e maior GPD e melhor CA em relação aos tratamentos uréia e A-150S. As rações com uréia e A-150S não diferiram (P>0,05) entre si. A substituição do FS por fontes de NNP reduziu o desempenho de bovino de corte em terminação.Eighty-one young bulls (27 Nellore, 27 Canchim, and 27 Holstein), averaging 18-month-old and weighting 360kg of initial body weight (BW), were used to evaluate the effects of nitrogen sources on feedlot performance. Treatments were assigned in a completely randomized block design using three steers per stall and nine per treatment. Blocks were defined by initial BW and breed. Experimental treatments were: 1) soybean meal, 2) urea, and 3) starea. Diets were isonitrogenous and isoenergetic composed by 50% concentrate and 50% forage (45% hydrolyzed sugarcane bagasse + 5% in natura sugarcane bagasse). Dry matter intakes (DMI) were 8.99, 7.43, and 7.69kg/day, average daily gains (ADG) were 0.983, 0.368, and 0.404kg/day and feed efficiencies were 9.56, 20.14, and 19.54kg DM/kg of gain for soybean meal, urea and starea treatments, respectively for steers fed. Diets with soybean meal showed proportionally higher (P<0.01) DMI, higher average daily gain and better feed efficiency compared to urea and starea diets. No differences (P>0.05) between urea and starea treatments were observed. Replacement of soybean meal by nonprotein nitrogen sources decreased the finishing beef steers performance

In situ experiments with synchrotron high-energy x-rays of Ni-Ti alloys produced by powder metallurgy

The structural evolution that takes place during the homogenization heat treatments of powder metallurgical Ni-Ti- alloys was studied by in situ synchrotron diffraction. It is proposed to get a deeper understanding of this phenomenon by using different types of thermal/mechanical cycles

Production of Cu/Diamond composites for first-wall heat sinks

Due to their suitable thermal conductivity and strength copper-based materials have been considered appropriate heat sinks for first wall panels in nuclear fusion devices. However, increased thermal conductivity and mechanical strength are demanded and the concept of property tailoring involved in the design of metal matrix composites advocates for the potential of nanodiamond dispersions in copper. Copper-nanodiamond composite materials can be produced by mechanical alloying followed by a consolidation operation. Yet, this powder metallurgy route poses several challenges: nanodiamond presents intrinsically difficult bonding with copper; contamination by milling media must be closely monitored; and full densification and microstructural homogeneity should be obtained with consolidation. The present line of work is aimed at an optimization of the processing conditions of Cu-nanodiamond composites. The challenges mentioned above have been addressed, respectively, by incorporating chromium in the matrix to form a stable carbide interlayer binding the two components; by assessing the contamination originating from the milling operation through particle-induced X-ray emission spectroscopy; and by comparing the densification obtained by spark plasma sintering with hot-extrusion data from previous studies

Microstructure characterization of ODS-RAFM steels

Results of the microstructural characterization of four different RAFM ODS Eurofer 97 batches are presented and discussed. Analyses and observations were performed by nuclear microprobe and scanning and transmission electron microscopy. X-ray elemental distribution maps obtained with proton beam scans showed homogeneous composition within the proton beam spatial resolution and, in particular, pointed to a uniform distribution of ODS (yttria) nanoparticles in the Eurofer 97 matrix. This was confirmed by transmission electron microscopy. Scanning electron microscopy coupled with energy dispersive spectroscopy made evident the presence of chromium carbide precipitation. Precipitates occurred preferentially along grain boundaries (GB) in three of the batches and presented a discrete distribution in the other, as a result of different thermo-mechanical routes. Additional electron backscattered diffraction experiments revealed the crystalline textures in the ferritic polycrystalline structure of the ODS steel samples

Microstructure characterization of ODS-RAFM steels

Results of the microstructural characterization of four different RAFM ODS Eurofer 97 batches are presented and discussed. Analyses and observations were performed by nuclear microprobe and scanning and transmission electron microscopy. X-ray elemental distribution maps obtained with proton beam scans showed homogeneous composition within the proton beam spatial resolution and, in particular, pointed to a uniform distribution of ODS (yttria) nanoparticles in the Eurofer 97 matrix. This was confirmed by transmission electron microscopy. Scanning electron microscopy coupled with energy dispersive spectroscopy made evident the presence of chromium carbide precipitation. Precipitates occurred preferentially along grain boundaries (GB) in three of the batches and presented a discrete distribution in the other, as a result of different thermo-mechanical routes. Additional electron backscattered diffraction experiments revealed the crystalline textures in the ferritic polycrystalline structure of the ODS steel samples

Mechanical activation of pre-alloyed NiTi2 and elemental Ni for the synthesis of NiTi alloys

ABSTRACT: This work reports on an efficient powder metallurgy method for the synthesis of NiTi alloys, involving mechanical activation of pre-alloyed NiTi2 and elemental Ni powders (NiTi2-Ni) followed by a press-and-sinter step. The idea is to take advantage of the brittle nature of NiTi2 to promote a better efficiency of the mechanical activation process. The conventional mechanical activation route using elemental Ti and Ni powders (Ti-Ni) was also used for comparative purposes. Starting with (NiTi2-Ni) powder mixtures resulted in the formation of a predominant amorphous structure after mechanical activation at 300 rpm for 2 h. A sintered specimen consisting mainly of NiTi phase was obtained after vacuum sintering at 1050 degrees C for 0.5 h. The produced NiTi phase exhibited the martensitic transformation behavior. Using elemental Ti powders instead of pre-alloyed NiTi2 powders, the structural homogenization of the synthesized NiTi alloys was delayed. Performing the mechanical activation at 300 rpm for the (Ti-Ni) powder mixtures gave rise to the formation of composite particles consisting in dense areas of alternate fine layers of Ni and Ti. However, no significant structural modification was observed even after 16 h of mechanical activation. Only after vacuum sintering at 1050 degrees C for 6 h, the NiTi phase was observed to be the predominant phase. The higher reactivity of the mechanically activated (NiTi2-Ni) powder particles can explain the different sintering behavior of those powders compared with the mechanically activated (Ti-Ni) powders. It is demonstrated that this innovative approach allows an effective time reduction in the mechanical activation and of the vacuum sintering step.info:eu-repo/semantics/publishedVersio

Characterization of smart MARFOS NiTi shape memory alloys

In the present study, structural characterization of NiTi smart shape memory al-loys (SMAs), produced by an alternative powder metallurgy approach named mechanically ac-tivated reactive forging (MARFOS), was carried out by means of transmission electron micros-copy (TEM), scanning electron microscopy (SEM) and X-ray diffraction (XRD). It was observed that MARFOS materials had a multiphase nanocrystalline structure. In addition, the transformation behaviour associated with the shape memory effect of the MARFOS aged mate-rials was studied with differential scanning calorimetry (DSC). Multiple-step martensitic trans-formations could be observed in aged materials

Nonconventional production technologies for NiTi shape memory alloys

The development of new production technologies for NiTi Shape Memory Alloys (SMAs) is always challenging. Recently, we introduced two powder metallurgical (PM) processing routes involving mechanical activation of elemental powder mixtures and densification through extrusion or forging. Those processes were named Mechanically Activated Reactive Extrusion Synthesis (MARES) and Mechanically Activated Reactive FOrging Synthesis (MARFOS). Heat treatments were performed in order to adjust the B2-NiTi matrix composition, yielding a microstructure consisting of a homogeneous dispersion of Ni4Ti3 precipitates embedded in nanocrystalline B2-NiTi matrix. In the present study, we demonstrate the viability of those PM processes for producing NiTi SMAs. With insitu X-ray diffraction and differential scanning calorimetry it is shown that B2-NiTi matrix undergo a B2« R«B19 two-step phase transformatio