Asymmetric triplex metallohelices with high and selective activity against cancer cells

Small cationic amphiphilic α-helical peptides are emerging as agents for the treatment of cancer and infection, but they are costly and display unfavourable pharmacokinetics. Helical coordination complexes may offer a three-dimensional scaffold for the synthesis of mimetic architectures. However, the high symmetry and modest functionality of current systems offer little scope to tailor the structure to interact with specific biomolecular targets, or to create libraries for phenotypic screens. Here, we report the highly stereoselective asymmetric self-assembly of very stable, functionalized metallohelices. Their anti-parallel head-to-head-to-tail ‘triplex’ strand arrangement creates an amphipathic functional topology akin to that of the active sub-units of, for example, host-defence peptides and ​p53. The metallohelices display high, structure-dependent toxicity to the human colon carcinoma cell-line HCT116 ​p53++, causing dramatic changes in the cell cycle without DNA damage. They have lower toxicity to human breast adenocarcinoma cells (MDA-MB-468) and, most remarkably, they show no significant toxicity to the bacteria methicillin-resistant Staphylococcus aureus and Escherichia coli. At a glanc

Is it feasible to deliver a complex intervention to improve the outcome of falls in people with dementia? A protocol for the DIFRID feasibility study

Background: People with dementia (PWD) experience ten times as many incident falls as people without dementia. Little is known about how best to deliver services to people with dementia following a fall. We used an integrated, mixed-methods approach to develop a new intervention which combines theory generated via a realist synthesis and data on current provision and pathways, gathered through a prospective observational study as well as qualitative interviews, focus groups, and ethnographic observation. This intervention is to be tested in a feasibility study in the UK National Health Service. Methods: People living with dementia in one of three geographical areas will be eligible for the study if they experience a fall requiring healthcare attention and have an informal carer. Potential participants will be identified by community services (primary care, paramedics, telecare), secondary care (ED; facilitated discharge services; rehabilitation outreach teams) and research case registers. Participants will receive a complex multidisciplinary intervention focused on their goals and interests for up to 12 weeks. The intervention will be delivered by occupational therapists, physiotherapists and rehabilitation support workers. Feasibility outcomes will include recruitment and retention, suitability and acceptability of outcome measures and acceptability, feasibility and fidelity of intervention components. PWD outcome measures will include number of falls, Montreal Cognitive Assessment (MOCA), European Quality of Life Instrument (EQ-5D-5L), Quality of Life–Alzheimer’s Disease Scale (QOL-AD), Modified Falls Efficacy Scale (MFES) and Goal Attainment Scaling (GAS). PWD outcome measures completed by an informal carer will include Disability Assessment for Dementia (DAD), EQ-5D-5L Proxy, QoL-AD Proxy and a Health Utilisation Questionnaire (HUQ), The carer outcome measure will be the Zarit Burden Interview (ZBI). An embedded process evaluation will explore barriers and facilitators to recruitment and intervention delivery. Discussion: The study results will inform whether and how a larger multicentre RCT should be undertaken. A full RCT would have the potential to show how outcomes can be improved for people with dementia who have fallen. Ethics and dissemination: The National Research Ethics Service Committee Newcastle and North Tyneside 2 approved the feasibility study. Trial registration: International Standard Randomised Controlled Trial Registry Registration number: ISRCTN41760734 Date of registration: 16/11/201

Structure of the hDmc1-ssDNA filament reveals the principles of its architecture

In eukaryotes, meiotic recombination is a major source of genetic diversity, but its defects in humans lead to abnormalities such as Down's, Klinefelter's and other syndromes. Human Dmc1 (hDmc1), a RecA/Rad51 homologue, is a recombinase that plays a crucial role in faithful chromosome segregation during meiosis. The initial step of homologous recombination occurs when hDmc1 forms a filament on single-stranded (ss) DNA. However the structure of this presynaptic complex filament for hDmc1 remains unknown. To compare hDmc1-ssDNA complexes to those known for the RecA/Rad51 family we have obtained electron microscopy (EM) structures of hDmc1-ssDNA nucleoprotein filaments using single particle approach. The EM maps were analysed by docking crystal structures of Dmc1, Rad51, RadA, RecA and DNA. To fully characterise hDmc1-DNA complexes we have analysed their organisation in the presence of Ca2+, Mg2+, ATP, AMP-PNP, ssDNA and dsDNA. The 3D EM structures of the hDmc1-ssDNA filaments allowed us to elucidate the principles of their internal architecture. Similar to the RecA/Rad51 family, hDmc1 forms helical filaments on ssDNA in two states: extended (active) and compressed (inactive). However, in contrast to the RecA/Rad51 family, and the recently reported structure of hDmc1-double stranded (ds) DNA nucleoprotein filaments, the extended (active) state of the hDmc1 filament formed on ssDNA has nine protomers per helical turn, instead of the conventional six, resulting in one protomer covering two nucleotides instead of three. The control reconstruction of the hDmc1-dsDNA filament revealed 6.4 protein subunits per helical turn indicating that the filament organisation varies depending on the DNA templates. Our structural analysis has also revealed that the N-terminal domain of hDmc1 accomplishes its important role in complex formation through domain swapping between adjacent protomers, thus providing a mechanistic basis for coordinated action of hDmc1 protomers during meiotic recombination

Socio-demographic factors and edentulism: the Nigerian experience

BACKGROUND: The rate of total edentulism is said to be increasing in developing countries and this had been attributed mainly to the high prevalence of periodontal diseases and caries. Several reports have shown that non-disease factors such as attitude, behavior, dental attendance, characteristics of health care systems and socio-demographic factors play important roles in the aetiopathogenesis of edentulism. The aim of this study was to assess the relationship between socio-demographic factors and edentulism. METHODS: A total of 152 patients made up of 80 (52.6%) males and 72 (47.4%) females who presented in two prosthetic clinics located in an urban and a rural area were included in the study. The relationship between gender, age, socio-economic status and edentulism in this study population was established. RESULTS: No significant relationship between gender and denture demand was noted in the study. The demand for complete dentures increased with age while the demand for removable partial dentures also increased with age until the 3(rd )decade and then started to decline. A significant relationship was found between denture demand and the level of education with a higher demand in lower educational groups (p < 0.001). In addition, the lower socio-economic group had a higher demand more for prostheses than the higher group. CONCLUSIONS: The findings in this study revealed a significant relationship between socio-demographic variables and edentulism with age, educational level and socio-economic status playing vital roles in edentulism and denture demand

The microRNA-29 family in cartilage homeostasis and osteoarthritis

MicroRNAs have been shown to function in cartilage development and homeostasis, as well as in progression of osteoarthritis. The objective of the current study was to identify microRNAs involved in the onset or early progression of osteoarthritis and characterise their function in chondrocytes. MicroRNA expression in mouse knee joints post-DMM surgery was measured over 7 days. Expression of miR-29b-3p was increased at day 1 and regulated in the opposite direction to its potential targets. In a mouse model of cartilage injury and in end-stage human OA cartilage, the miR-29 family were also regulated. SOX9 repressed expression of miR-29a-3p and miR-29b-3p via the 29a/b1 promoter. TGFβ1 decreased expression of miR-29a, b and c (3p) in primary chondrocytes, whilst IL-1β increased (but LPS decreased) their expression. The miR-29 family negatively regulated Smad, NFκB and canonical WNT signalling pathways. Expression profiles revealed regulation of new WNT-related genes. Amongst these, FZD3, FZD5, DVL3, FRAT2, CK2A2 were validated as direct targets of the miR-29 family. These data identify the miR-29 family as microRNAs acting across development and progression of OA. They are regulated by factors which are important in OA and impact on relevant signalling pathways

Perceptions of, and reactions to, environmental heat: a brief note on issues of concern in relation to occupational health

Average temperatures around the world are already increasing, and climate change projections suggest that global mean temperatures will continue to rise. As the effects, and projected effects, of climate change are becoming clearer, it is more apparent that the health effects of heat exposure will need further investigation. The risks associated with heat exposure are especially relevant to understandings of occupational health for people involved in labouring or agricultural work in low-income countries. This review is a partial look at the ways in which issues surrounding heat exposure and occupational health have been treated in some of the available literature. This literature focuses on military-related medical understandings of heat exposure as well as heat exposure in working environments. The ways that these issues have been treated throughout the literature reflect the ways in which technologies of observation are intertwined with social attitudes. The effects of heat on the health of working people, as well as identification of risk groups, will require further research in order to promote prophylactic measures as well as to add to understandings of the actual and potential consequences of climatic change

Minimum Information About a Simulation Experiment (MIASE)

The original publication is available at www.ploscompbiol.orgReproducibility of experiments is a basic requirement for science. Minimum Information (MI) guidelines have proved a helpful means of enabling reuse of existing work in modern biology. The Minimum Information Required in the Annotation of Models (MIRIAM) guidelines promote the exchange and reuse of biochemical computational models. However, information about a model alone is not sufficient to enable its efficient reuse in a computational setting. Advanced numerical algorithms and complex modeling workflows used in modern computational biology make reproduction of simulations difficult. It is therefore essential to define the core information necessary to perform simulations of those models. The Minimum Information About a Simulation Experiment describes the minimal set of information that must be provided to make the description of a simulation experiment available to others. It includes the list of models to use and their modifications, all the simulation procedures to apply and in which order, the processing of the raw numerical results, and the description of the final output. MIASE allows for the reproduction of any simulation experiment. The provision of this information, along with a set of required models, guarantees that the simulation experiment represents the intention of the original authors. Following MIASE guidelines will thus improve the quality of scientific reporting, and will also allow collaborative, more distributed efforts in computational modeling and simulation of biological processes.The discussions that led to the definition of MIASE benefited from the support of a Japan Partnering Award by the UK Biotechnology and Biological Sciences Research Council. DW was supported by the Marie Curie program and by the German Research Association (DFG Research Training School ‘‘dIEM oSiRiS’’ 1387/1). This publication is based on work (EJC) supported in part by Award No KUK-C1-013-04, made by King Abdullah University of Science and Technology (KAUST). FTB acknowledges support by the NIH (grant 1R01GM081070- 01). JC is supported by the European Commission, DG Information Society, through the Seventh Framework Programme of Information and Communication Technologies, under the VPH NoE project (grant number 223920). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.Publishers versio

Community Justice and Public Safety: Assessing Criminal Justice Policy Through the Lens of the Social Contract

A reconceptualization of the idea of “community justice” is framed in the logic of the social contract and emphasizes the responsibility of the justice system for the provision of public safety. First, we illustrate the ways in which the criminal justice system has hindered the efforts of community residents to participate in the production of public safety by disrupting informal social networks. Then we turn to an examination of the compositional dynamics of California prison populations over time to demonstrate that the American justice system has failed to meet their obligations to provide public safety by incapacitating dangerous offenders. We argue that these policy failures represent a breach of the social contract and advocate for more effective collaboration between communities and the formal criminal justice system so that all parties can fulfill their obligations under the contract

A Kinematic Approach for Efficient and Robust Simulation of the Cardiac Beating Motion

Computer simulation techniques for cardiac beating motions potentially have many applications and a broad audience. However, most existing methods require enormous computational costs and often show unstable behavior for extreme parameter sets, which interrupts smooth simulation study and make it difficult to apply them to interactive applications. To address this issue, we present an efficient and robust framework for simulating the cardiac beating motion. The global cardiac motion is generated by the accumulation of local myocardial fiber contractions. We compute such local-to-global deformations using a kinematic approach; we divide a heart mesh model into overlapping local regions, contract them independently according to fiber orientation, and compute a global shape that satisfies contracted shapes of all local regions as much as possible. A comparison between our method and a physics-based method showed that our method can generate motion very close to that of a physics-based simulation. Our kinematic method has high controllability; the simulated ventricle-wall-contraction speed can be easily adjusted to that of a real heart by controlling local contraction timing. We demonstrate that our method achieves a highly realistic beating motion of a whole heart in real time on a consumer-level computer. Our method provides an important step to bridge a gap between cardiac simulations and interactive applications