Evaluation of a Phosphate Management Protocol to Achieve Optimum Serum Phosphate Levels in Hemodialysis Patients

Original article can be found at: http://www.sciencedirect.com/science/journal/10512276 Copyright National Kidney Foundation, Inc. DOI: 10.1053/j.jrn.2008.05.003To evaluate the effectiveness of a protocol designed to optimize serum phosphate levels in patients undergoing regular hemodialysis (HD).Peer reviewe

Semisolid processing characteristics of AM series Mg alloys by rheo-diecasting

The official published version of this Article can be found at the link below - Copyright @ 2006 ASM InternationalAn investigation has been made into the solidification behavior and microstructural evolution of AM50, AM70, and AM90 alloys during rheo-diecasting, their processibility, and the resulting mechanical properties. It was found that solidification of AM series alloys under intensive melt shearing in the unique twin-screw slurry maker during rheo-diecasting gave rise to numerous spheroidal primary magnesium (Mg) particles that were uniformly present in the microstructure. As a result, the network of the beta-Mg17Al12 phase was consistently interrupted by these spheroidal and ductile particles. Such a microstructure reduced the obstacle of deformation and the harmfulness of the beta-Mg17Al12 network on ductility, and therefore improved the ductility of rheo-diecast AM alloys. It was shown that, even with 9 wt pct Al, the elongation of rheo-diecast AM90 still achieved (9 +/- 1.2) pct. Rheodiecasting thus provides an attractive processing route for upgrading the alloy specification of AM series alloys by increasing the aluminum (Al) content while ensuring ductility. Assessment of the processibility of AM series alloys for semisolid processing showed that high Al content AM series alloys are more suitable for rheo-diecasting than low Al content alloys, because of the lower sensitivity of solid fraction to temperature, the lower liquidus temperature, and the smaller interval between the semisolid processing temperature and the complete solidification temperature.This work is supported by the EPSR

Schur Polynomials and the Yang-Baxter equation

We show that within the six-vertex model there is a parametrized Yang-Baxter equation with nonabelian parameter group GL(2)xGL(1) at the center of the disordered regime. As an application we rederive deformations of the Weyl character formule of Tokuyama and of Hamel and King.Comment: Revised introduction; slightly changed reference

Hierarchical NiO/CMK-3 Photocathode for a p-Type Dye-Sensitized Solar Cell with Improved Photoelectrochemical Performance and Fast Hole Transfer.

The sluggish photoelectrochemical performance of p-type dye-sensitized solar cells (p-DSSCs) has hindered its commercial use. In this work, we introduce a novel hierarchical nanocomposite of NiO nanoparticles anchored on highly ordered mesoporous carbons CMK-3 (NiO/CMK-3). Using CMK-3 as a backbone effectively prevented the self-aggregation of NiO nanoparticles and subsequently increased the total specific surface area of the composite for more dye adsorption. The interconnected conductive networks of CMK-3 also served as a split-flow high-speed channel, which was beneficial for hole spin-flow to accelerate hole transfer. The hierarchical NiO/CMK-3 photocathode improved the photovoltaic conversion efficiency to 1.48% in a cell with a Cobalt(II)/(III) electrolyte and a PMI-6T-TPA dye

Continuous twin screw rheo-extrusion of an AZ91D magnesium alloy

© The Minerals, Metals & Materials Society and ASM International 2012The twin screw rheo-extrusion (TSRE) is designed to take advantage of the nondendritc microstructure and thixotropic characterization of semisolid-metal slurries and produce simple metal profiles directly from melts. The extrusion equipment consists of a rotor-stator high shear slurry maker, a twin screw extruder, and a die assembly. The process is continuous and has a potential for significantly saving energy, manufacturing cost, and enhancing efficiency. The present investigation was carried out to study the process performance for processing rods of an AZ91D magnesium alloy and the microstructure evolution during processing. The semisolid slurry prepared by the process was characterized by uniformly distributed nondendritic granular primary phase particles. AZ91D rods with uniform and fine microstructures and moderate mechanical properties were produced. For the given slurry making parameters, decreasing extrusion temperature was found to improve microstructures and properties. The mechanisms of particle granulation and refinement and the effect of processing parameters on process performance and thermal management are discussed. © 2012 The Minerals, Metals & Materials Society and ASM International.EPSRC (UK) and Rautomead Lt

Disease-specific, neurosphere-derived cells as models for brain disorders

There is a pressing need for patient-derived cell models of brain diseases that are relevant and robust enough to produce the large quantities of cells required for molecular and functional analyses. We describe here a new cell model based on patient-derived cells from the human olfactory mucosa, the organ of smell, which regenerates throughout life from neural stem cells. Olfactory mucosa biopsies were obtained from healthy controls and patients with either schizophrenia, a neurodevelopmental psychiatric disorder, or Parkinson's disease, a neurodegenerative disease. Biopsies were dissociated and grown as neurospheres in defined medium. Neurosphere-derived cell lines were grown in serum-containing medium as adherent monolayers and stored frozen. By comparing 42 patient and control cell lines we demonstrated significant disease-specific alterations in gene expression, protein expression and cell function, including dysregulated neurodevelopmental pathways in schizophrenia and dysregulated mitochondrial function, oxidative stress and xenobiotic metabolism in Parkinson's disease. The study has identified new candidate genes and cell pathways for future investigation. Fibroblasts from schizophrenia patients did not show these differences. Olfactory neurosphere-derived cells have many advantages over embryonic stem cells and induced pluripotent stem cells as models for brain diseases. They do not require genetic reprogramming and they can be obtained from adults with complex genetic diseases. They will be useful for understanding disease aetiology, for diagnostics and for drug discovery

The anisotropic Ashkin-Teller model: a renormalization group study

The two-dimensional ferromagnetic anisotropic Ashkin-Teller model is investigated through a real-space renormalization-group approach. The critical frontier, separating five distinct phases, recover all the known exacts results for the square lattice. The correlation length $(\nu_T)$ and crossover $(\phi)$ critical exponents are also calculated. With the only exception of the four-state Potts critical point, the entire phase diagram belongs to the Ising universality class.Comment: 3 ps figures, accepted for publication in Physica

Design of Drum Type Apparatus for Processing of Bulk Materials

The article presents the development and research of drum continuous mixers, most attention is paid to the results of theoretical (using of cybernetic approach) and experimental studies of longitudinal mixing particulate material in rotating drums of continuous action, the influence of internal recycles of material flows, intensifying the process of smoothing the input fluctuations. The authors analyzed the influence of internal recycles material flows, intensifying the process of smoothing the input fluctuations. The results presented in this paper were obtained by the experiments on the smoothing ability determination during which they change the frequency of the drum rotation, the location of the Г-shaped mixer blades on the drum mixer. The article reported that the studies were conducted on three mixtures which components have different physical and mechanical systems with various dispersed liquid additives and without it

Diffusion as mixing mechanism in granular materials

We present several numerical results on granular mixtures. In particular, we examine the efficiency of diffusion as a mixing mechanism in these systems. The collisions are inelastic and to compensate the energy loss, we thermalize the grains by adding a random force. Starting with a segregated system, we show that uniform agitation (heating) leads to a uniform mixture of grains of different sizes. We define a characteristic mixing time, $\tau_{mix}$, and study theoretically and numerically its dependence on other parameters like the density. We examine a model for bidisperse systems for which we can calculate some physical quantities. We also examine the effect of a temperature gradient and demonstrate the appearance of an expected segregation.Comment: 15 eps figures, include

Identification of a nonsense mutation in the granulocyte-colony-stimulating factor receptor in severe congenital neutropenia

Severe congenital neutropenia (Kostmann syndrome) is characterized by profound absolute neutropenia and a maturation arrest of marrow progenitor cells at the promyelocyte-myelocyte stage. Marrow cells from such patients frequently display a reduced responsiveness to granulocyte-colony-stimulating factor (G-CSF). G-CSF binds to and activates a specific receptor which transduces signals critical for the proliferation and maturation of granulocytic progenitor cells. Here we report the identification of a somatic point mutation in one allele of the G-CSF receptor gene in a patient with severe congenital neutropenia. The mutation results in a cytoplasmic truncation of the receptor. When expressed in murine myeloid cells, the mutant receptor transduced a strong growth signal but, in contrast to the wild-type G-CSF receptor, was defective in maturation induction. The mutant receptor chain may act in a dominant negative manner to block granulocytic maturation