How occasional backstepping can speed up a processive motor protein

Fueled by the hydrolysis of ATP, the motor protein kinesin literally walks on two legs along the biopolymer microtubule. The number of accidental backsteps that kinesin takes appears to be much larger than what one would expect given the amount of free energy that ATP hydrolysis makes available. This is puzzling as more than a billion years of natural selection should have optimized the motor protein for its speed and efficiency. But more backstepping allows for the production of more entropy. Such entropy production will make free energy available. With this additional free energy, the catalytic cycle of the kinesin can be speeded up. We show how measured backstep percentages represent an optimum at which maximal net forward speed is achieved.Comment: LaTeX, 5 pages, 3 figure

Immobilization of different biomolecules by atomic force microscopy

<p>Abstract</p> <p>Background</p> <p>Micrometer resolution placement and immobilization of probe molecules is an important step in the preparation of biochips and a wide range of lab-on-chip systems. Most known methods for such a deposition of several different substances are costly and only suitable for a limited number of probes. In this article we present a flexible procedure for simultaneous spatially controlled immobilization of functional biomolecules by molecular ink lithography.</p> <p>Results</p> <p>For the bottom-up fabrication of surface bound nanostructures a universal method is presented that allows the immobilization of different types of biomolecules with micrometer resolution. A supporting surface is biotinylated and streptavidin molecules are deposited with an AFM (atomic force microscope) tip at distinct positions. Subsequent incubation with a biotinylated molecule species leads to binding only at these positions. After washing streptavidin is deposited a second time with the same AFM tip and then a second biotinylated molecule species is coupled by incubation. This procedure can be repeated several times. Here we show how to immobilize different types of biomolecules in an arbitrary arrangement whereas most common methods can deposit only one type of molecules. The presented method works on transparent as well as on opaque substrates. The spatial resolution is better than 400 nm and is limited only by the AFM's positional accuracy after repeated z-cycles since all steps are performed in situ without moving the supporting surface. The principle is demonstrated by hybridization to different immobilized DNA oligomers and was validated by fluorescence microscopy.</p> <p>Conclusions</p> <p>The immobilization of different types of biomolecules in high-density microarrays is a challenging task for biotechnology. The method presented here not only allows for the deposition of DNA at submicrometer resolution but also for proteins and other molecules of biological relevance that can be coupled to biotin.</p

Information and maximum power in a feedback controlled Brownian ratchet

Closed-loop or feedback controlled ratchets are Brownian motors that operate using information about the state of the system. For these ratchets, we compute the power output and we investigate its relation with the information used in the feedback control. We get analytical expressions for one-particle and few-particle flashing ratchets, and we find that the maximum power output has an upper bound proportional to the information. In addition, we show that the increase of the power output that results from changing the optimal open-loop ratchet to a closed-loop ratchet also has an upper bound that is linear in the information.Comment: LaTeX, 6 pages, 4 figures, improved version to appear in Eur. Phys. J.

Construction of an artificial cell membrane anchor using DARC as a fitting for artificial extracellular functionalities of eukaryotic cells

The need to functionalize cell membranes in a directed way for specific applications as single cell arrays or to force close cell-to-cell contact for artificial intercellular interaction and/or induction concerning stem cell manipulation or in general to have a tool for membrane and cell surface-associated processes, we envisaged a neutral inactive membrane anchor for extracellular entities to facillitate the above mentioned functionalities

Label-free electrical quantification of the dielectrophoretic response of DNA

A purely electrical sensing scheme is presented that determines the concentration of macromolecules in solution by measuring the capacitance between planar microelectrodes. Concentrations of DNA in the ng/mL range have been used in samples of 1 microL volume. The method has been applied to the characterisation of the dielectrophoretic response of DNA without the need for any chemical modifications. The influence of electrical parameters like duty cycle, voltage and frequency has been investigated. The results are in good agreement with data from dielectrophoretic studies on fluorescently labelled DNA. Extension of the method down to the single molecule level appears feasible.Comment: 12 pages, 7 figure

DNA-nanostructure-assembly by sequential spotting

<p>Abstract</p> <p>Background</p> <p>The ability to create nanostructures with biomolecules is one of the key elements in nanobiotechnology. One of the problems is the expensive and mostly custom made equipment which is needed for their development. We intended to reduce material costs and aimed at miniaturization of the necessary tools that are essential for nanofabrication. Thus we combined the capabilities of molecular ink lithography with DNA-self-assembling capabilities to arrange DNA in an independent array which allows addressing molecules in nanoscale dimensions.</p> <p>Results</p> <p>For the construction of DNA based nanostructures a method is presented that allows an arrangement of DNA strands in such a way that they can form a grid that only depends on the spotted pattern of the anchor molecules. An atomic force microscope (AFM) has been used for molecular ink lithography to generate small spots. The sequential spotting process allows the immobilization of several different functional biomolecules with a single AFM-tip. This grid which delivers specific addresses for the prepared DNA-strand serves as a two-dimensional anchor to arrange the sequence according to the pattern. Once the DNA-nanoarray has been formed, it can be functionalized by PNA (peptide nucleic acid) to incorporate advanced structures.</p> <p>Conclusions</p> <p>The production of DNA-nanoarrays is a promising task for nanobiotechnology. The described method allows convenient and low cost preparation of nanoarrays. PNA can be used for complex functionalization purposes as well as a structural element.</p

Active Brownian Motion Models and Applications to Ratchets

We give an overview over recent studies on the model of Active Brownian Motion (ABM) coupled to reservoirs providing free energy which may be converted into kinetic energy of motion. First, we present an introduction to a general concept of active Brownian particles which are capable to take up energy from the source and transform part of it in order to perform various activities. In the second part of our presentation we consider applications of ABM to ratchet systems with different forms of differentiable potentials. Both analytical and numerical evaluations are discussed for three cases of sinusoidal, staircase-like and Mateos ratchet potentials, also with the additional loads modeled by tilted potential structure. In addition, stochastic character of the kinetics is investigated by considering perturbation by Gaussian white noise which is shown to be responsible for driving the directionality of the asymptotic flux in the ratchet. This \textit{stochastically driven directionality} effect is visualized as a strong nonmonotonic dependence of the statistics of the right versus left trajectories of motion leading to a net current of particles. Possible applications of the ratchet systems to molecular motors are also briefly discussedComment: 12 pages, 17 figure

Dielectrophoretic immobilisation of antibodies on microelectrode arrays

A silicon based chip device with a regular array of more than 100 000 cylindrical sub-microelectrodes has been developed for the dielectrophoretic (DEP) manipulation of nanoparticles and molecules in solution. It was fabricated by a standard CMOS (complementary metal oxide semiconductor) compatible process. The distribution of the electrical field gradient was calculated to predict the applicability of the setup. Heating due to field application was determined microscopically using a temperature sensitive fluorescent dye. Depending on voltage and frequency, temperature increase was found to be compatible with protein function. Successful field controlled immobilisation of biomolecules from solution was demonstrated with the autofluorescent protein R-phycoerythrin (RPE) and with fluorescently labelled IgG antibodies. Biological activity after DEP application was proven by immobilisation of an anti-RPE antibody and subsequent binding of RPE. These results demonstrate that the developed chip system allows the directed immobilisation of proteins onto microelectrodes by dielectrophoresis without the need for any chemical modification and that protein function is preserved. Being based on standard lithographical methods, further miniaturisation and on-chip integration of electronics towards a multiparameter single cell analysis system appear near at hand

Dielectrophoretic immobilisation of antibodies on microelectrode arrays

A silicon based chip device with a regular array of more than 100 000 cylindrical sub-microelectrodes has been developed for the dielectrophoretic (DEP) manipulation of nanoparticles and molecules in solution. It was fabricated by a standard CMOS (complementary metal oxide semiconductor) compatible process. The distribution of the electrical field gradient was calculated to predict the applicability of the setup. Heating due to field application was determined microscopically using a temperature sensitive fluorescent dye. Depending on voltage and frequency, temperature increase was found to be compatible with protein function. Successful field controlled immobilisation of biomolecules from solution was demonstrated with the autofluorescent protein R-phycoerythrin (RPE) and with fluorescently labelled IgG antibodies. Biological activity after DEP application was proven by immobilisation of an anti-RPE antibody and subsequent binding of RPE. These results demonstrate that the developed chip system allows the directed immobilisation of proteins onto microelectrodes by dielectrophoresis without the need for any chemical modification and that protein function is preserved. Being based on standard lithographical methods, further miniaturisation and on-chip integration of electronics towards a multiparameter single cell analysis system appear near at hand

Identificação por espectrometria de massa MALDI-TOF de Salmonella spp. e Escherichia coli isolados de carcaças bovinas.

The aim of this study was to introduce matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry to improve the traditional microbiological method for the detection of Salmonella spp. and Escherichia coli in beef carcasses. Two hundred seventy samples from 90 beef carcasses were evaluated. The methodologies described in ISO 6579:2002 and in the Compendium of Methods for the Microbiological Examination of Foods were used for Salmonella spp. and E. coli isolation, respectively. MALDI-TOF analysis were performed on tryptone soya broth suspension isolates or directly from nutrient agar colonies, from the positive, inconclusive or negative biochemically tested samples for Salmonella and E. coli. Mass profiles were acquired on an Autoflex III SmartBeam MALDI-TOF mass spectrometer and the raw spectra were processed using the MALDI Biotyper software (Bruker Daltonics). According to the preliminary identification based on colony morphology and the biochemical reactions, seven isolates were positive for Salmonella spp. Through MALDI Biotyper these seven isolates were also classified as belonging to the genus Salmonella and further identified as S. enterica. Four isolates showing unusual phenotypic characteristics and inconclusive results in biochemical tests for Salmonella were identified as belonging to Citrobacter and Proteus genera after MALDI analysis. Regarding Escherichia coli, 37 were positive for species biochemical testing which MALDI Biotyper confirmed. MALDI-TOF methodology allowed rapid Salmonella spp. and E. coli identity confirmation and may be used to detect these microrganisms within bacterial isolates from beef carcasses.Título em inglês: MALDI-TOF mass spectrometry identification of Salmonella spp. and Escherichia coli isolated from bovine carcasses