597 research outputs found
Simulation of surfactant transport during the rheological relaxation of two-dimensional dry foams
We describe a numerical model to predict the rheology of two-dimensional dry
foams. The model accurately describes soap film curvature, viscous friction
with the walls, and includes the transport of surfactant within the films and
across the vertices where films meet. It accommodates the changes in foam
topology that occur when a foam flows and, in particular, accurately represents
the relaxation of the foam following a topological change. The model is
validated against experimental data, allowing the prediction of elastic and
viscous parameters associated with different surfactant solutions
Endoluminal Repair of a Contained Thoracic Aortic Rupture Due to Primary Staphylococcal Aortitis
AbstractWe report a case of primary infectious thoracic aortitis with contained rupture of the descending thoracic aorta caused by Staphylococcus aureus and successfully treated with a rifampicin-rinsed aortic stent graft
Yttria and Ceria Doped Zirconia Thin Films Grown by Pulsed Laser Deposition
The Yttria stabilized Zirconia (YSZ) is a standard electrolyte for solid oxide fuel cells (SOFCs), which are potential candidates for next generation portable and mobile power sources. YSZ electrolyte thin films having a cubic single phase allow reducing the SOFC operating temperature without diminishing the electrochemical power density. Films of 8 mol % Yttria stabilized Zirconia (8YSZ) and films with addition of 4 weight % Ceria (8YSZ + 4CeO2) were grown by pulsed laser deposition (PLD) technique using 8YSZ and 8YSZ + 4CeO2 targets and a Nd-YAG laser (355 nm). Films have been deposited on Soda-Calcia-Silica glass and Si(100) substrates at room temperature. The morphology and structural characteristics of the samples have been studied by means of X-ray diffraction and scanning electron microscopy. Films of a cubic-YSZ single phase with thickness in the range of 1-3 µm were grown on different substrates.Fil: Saporiti, F.. Universidad de Buenos Aires. Facultad de IngenierĂa. Departamento de IngenierĂa Mecánica. Grupo de Materiales Avanzados; Argentina;Fil: Juarez, R. E.. Universidad de Buenos Aires. Facultad de IngenierĂa. Departamento de IngenierĂa Mecánica. Grupo de Materiales Avanzados; Argentina;Fil: Audebert, Fernando Enrique. Consejo Nacional de Investigaciones CientĂficas y TĂ©cnicas. Oficina de CoordinaciĂłn Administrativa Houssay. Instituto de TecnologĂas y Ciencias de la IngenierĂa; Argentina; Universidad de Buenos Aires. Facultad de IngenierĂa. Departamento de IngenierĂa Mecánica. Grupo de Materiales Avanzados; Argentina;Fil: Boudard, M.. Centre National de la Recherche Scientifique. Laboratoire des MatĂ©riaux et du GĂ©nie Physique; Francia
Leaf Eh and pH: A Novel Indicator of Plant Stress. Spatial, Temporal and Genotypic Variability in Rice (Oryza sativa L.)
A wealth of knowledge has been published in the last decade on redox regulations in plants. However, these works remained largely at cellular and organelle levels. Simple indicators of oxidative stress at the plant level are still missing. We developed a method for direct measurement of leaf Eh and pH, which revealed spatial, temporal, and genotypic variations in rice. Eh (redox potential) and Eh@pH7 (redox potential corrected to pH 7) of the last fully expanded leaf decreased after sunrise. Leaf Eh was high in the youngest leaf and in the oldest leaves, and minimum for the last fully expanded leaf. Leaf pH decreased from youngest to oldest leaves. The same gradients in Eh-pH were measured for various varieties, hydric conditions, and cropping seasons. Rice varieties differed in Eh, pH, and/or Eh@pH7. Leaf Eh increases and leaf pH decreases with plant age. These patterns and dynamics in leaf Eh-pH are in accordance with the pattern and dynamics of disease infections. Leaf Eh-pH can bring new insight on redox processes at plant level and is proposed as a novel indicator of plant stress/health. It could be used by agronomists, breeders, and pathologists to accelerate the development of crop cultivation methods leading to agroecological crop protection
Rougher is more slippery:How adhesive friction decreases with increasing surface roughness due to the suppression of capillary adhesion
Nanoquasicrystalline Al-Fe-Cr-Ti alloy matrix/Îł-Al2O3 nanocomposite powders: The effect of the ball milling process
Quasicrystalline aluminium alloys and aluminium based nanocomposites with the advantage of high strength over commercial aluminium alloys have been studied for many years. In this work a nanoquasicrystalline Al-Fe-Cr-Ti alloy powder and a nanocomposite consisting of a mixture of a nanoquasicrystalline alloy and nanosize γ-Al2O3 powders were produced through mechanical milling with different milling speeds. It has been observed that a higher milling time or milling speed can improve the homogeneity of the γ-Al2O3 distribution. The α-Al crystallite size decreases and the hardness increases with the milling time. The smallest crystallite size (14 nm) and the highest hardness value (638 HV10g) were obtained for the nanocomposite after 30 h of milling at 250 rpm. As the α-Al crystallite size is the main change in the microstructure during the ball milling process, the change in the hardness of the milled powders was found to follow a Hall-Petch type relation with an exponent of 0.25
Clinical selection strategies to identify ischemic stroke patients with large anterior vessel occlusion: results from SITS-ISTR (Safe Implementation of Thrombolysis in Stroke International Stroke Thrombolysis Registry)
Background and Purpose—The National Institutes of Health Stroke Scale (NIHSS) correlates with presence of large anterior vessel occlusion (LAVO). However, the application of the full NIHSS in the prehospital setting to select patients eligible for treatment with thrombectomy is limited. Therefore, we aimed to evaluate the prognostic value of simple clinical selection strategies.
Methods—Data from the Safe Implementation of Thrombolysis in Stroke International Stroke Thrombolysis Registry (January 2012–May 2014) were analyzed retrospectively. Patients with complete breakdown of NIHSS scores and documented vessel status were included. We assessed the association of prehospital stroke scales and NIHSS symptom profiles with LAVO (internal carotid artery, carotid-terminus or M1-segment of the middle cerebral artery).
Results—Among 3505 patients, 23.6% (n=827) had LAVO. Pathological finding on the NIHSS item best gaze was strongly associated with LAVO (adjusted odds ratio 4.5, 95% confidence interval 3.8–5.3). All 3 face–arm–speech–time test (FAST) items identified LAVO with high sensitivity. Addition of the item gaze to the original FAST score (G-FAST) or high scores on other simplified stroke scales increased specificity. The NIHSS symptom profiles representing total anterior syndromes showed a 10-fold increased likelihood for LAVO compared with a nonspecific clinical profile. If compared with an NIHSS threshold of ≥6, the prehospital stroke scales performed similarly or even better without losing sensitivity.
Conclusions—Simple modification of the face–arm–speech–time score or evaluating the NIHSS symptom profile may help to stratify patients’ risk of LAVO and to identify individuals who deserve rapid transfer to comprehensive stroke centers. Prospective validation in the prehospital setting is required
Strengthening mechanisms in an Al-Fe-Cr-Ti nano-quasicrystalline alloy and composites
We report a study of the structure-processing-property relationships in a high strength AlFeCrTi nano-quasicrystalline alloy and composites containing 10 and 20Â vol% ductilising pure Al fibres. The superimposed contributions of several different strengthening mechanisms have been modelled analytically using data obtained from systematic characterisation of the monolithic alloy bar. An observed yield strength of 544Â MPa has been substantiated from a combination of solid solution strengthening, work hardening, precipitation hardening and Hall-Petch grain size dependent effects. These materials have been shown by other authors in previous published work to be highly sensitive to the size distribution of particles in the powder from which they are made, and the subsequent thermomechanical processing conditions. The processing condition employed in this study provided micron-sized grains with a strong [111] preferential orientation along the extrusion direction and a bimodal size distribution of the icosahedral nano-quasicrystalline precipitates. Both were deemed to be a significant contributor to the high yield strength observed. The addition of pure Al fibres was found to decrease the yield strength linearly with increasing Al content, and to augment the ductility of the composites.Industrial collaborator ALPOCO Ltd. (and more specifically Steve McArthur) provided the powders. Dr. Karen Kruska and Dr. Alan Xu assisted with sample preparation of FIB lift-out specimens of the atomised powder for TEM analysis. EPSRC Project EP/E040608/1 provided financial support. M. Galano thanks the RAEng for their support by means of a Research Fellowship. F. Audebert and M. Galano thank PICT-Oxford2010/2831. F. Audebert also thanks UBACyT20020130100663 and FONARSEC FS Nano 2010/11 for financial support.Peer Reviewe
- …