Optimised pulse duration for the laser cleaning of oil gilding

The laser cleaning problem of gold leaf gilded surfaces was investigated here. Preliminary irradiation tests carried out on pure gold leaf standards evidenced the crucial importance of the laser pulse duration for avoiding serious damages. Optimised pulse duration providing good cleaning results with negligible side effects was then selected and successfully used in the restoration of three Renaissance masterpieces

Preliminary results of the Italian neutron experimental station INES at ISIS: Archaeometric applications

The INES project was sponsored by the CNR Neutron Spectroscopy Advisory Committee, stressing the importance of realizing an Italian Neutron Experimental Station (INES) at the world most powerful pulsed neutron source (ISIS, Rutherford Appleton Laboratory, UK) and evidencing the strategic value that such a test station would assume in the field of applied sciences like, for example, chemistry, material science, Earth science, crystallography, and last, but not least, in the field of science applied to the study of cultural-heritage artifacts

Preliminary results of the Italian neutron experimental station INES at ISIS: Archaeometric applications

The INES project was sponsored by the CNR Neutron Spectroscopy Advisory Committee, stressing the importance of realizing an Italian Neutron Experimental Station (INES) at the world most powerful pulsed neutron source (ISIS, Rutherford Appleton Laboratory, UK) and evidencing the strategic value that such a test station would assume in the field of applied sciences like, for example, chemistry, material science, Earth science, crystallography, and last, but not least, in the field of science applied to the study of cultural-heritage artifacts

Employment of an auto-regressive model for knock detection supported by 1D and 3D analyses

In this work, experimental data, carried out on a twin-cylinder turbocharged engine at full load operations and referred to a spark advance of borderline knock, are used to characterize the effects of cyclic dispersion on knock phenomena. 200 consecutive incylinder pressure signals are processed through a refined Auto-Regressive Moving Average (ARMA) mathematical technique, adopted to define the percentage of knocking cycles, through a prefixed threshold level. The heuristic method used for the threshold selection is then verified by 1D and 3D analyses. In particular, a 1D model, properly accounting for cycle-by-cycle variations, and coupled to a reduced kinetic sub-model, is used to reproduce the measured cycles, in terms of statistical distribution of a theoretical knock index. In addition, few individual cycles, representative of the whole dataset, are selected in a single operating condition in order to perform a more detailed knock analysis by means of a 3D CFD approach, coupled to a tabulated chemistry technique for auto-ignition modeling. Outcomes of 1D and 3D models are compared to the ARMA results and a substantial coherence of the numerical and experimental results is demonstrated. The integrated 1D and 3D analyses can hence help in supporting the choice of the experimental threshold level for knock identification, following a more standardized theoretical approach

Active Power Sharing and Frequency Restoration in an Autonomous Networked Microgrid

© 1969-2012 IEEE. Microgrid (MG) concept is considered as the best solution for future power systems, which are expected to receive a considerable amount of power through renewable energy resources and distributed generation units. Droop control systems are widely adopted in conventional power systems and recently in MGs for power sharing among generation units. However, droop control causes frequency fluctuations, which leads to poor power quality. This paper deals with frequency fluctuation and stability concerns of f-P droop control loop in MGs. Inspired from conventional synchronous generators, virtual damping is proposed to diminish frequency fluctuation in MGs. Then, it is demonstrated that the conventional frequency restoration method inserts an offset to the phase angle, which is in conflict with accurate power sharing. To this end, a novel control method, based on phase angle feedback, is proposed for frequency restoration in conjunction with a novel method for adaptively tuning the feedback gains to preserve precise active power sharing. Nonlinear stability analysis is conducted by drawing the phase variations of the nonlinear second-order equation of the δ-P droop loop and it is proved that the proposed method improves the stability margin of f-P control loop. Simulation results demonstrate the effectiveness of the proposed method