1,216 research outputs found
Multiprocessing techniques for unmanned multifunctional satellites Final report,
Simulation of on-board multiprocessor for long lived unmanned space satellite contro
Innovating Two-Stage Concrete with Improved Rheological, Mechanical and Durability Properties
Two-stage concrete (TSC), also known as preplaced aggregate concrete, is a special type of concrete that is produced using a unique procedure which differs from that of conventional concrete. TSC is distinguished by its high coarse aggregate content and exceptional placement technique, whereby aggregates are first pre-placed in the mold then injected with a special grout. The preplacement of aggregates saves substantial energy since only the grout needs mechanical mixing; the grout is self-leveling and needs no vibration and no mechanical compaction. However, TSC applications are still limited despite substantial advancement of modern concrete technology. Therefore, there is a need to explore new possibilities and applications for TSC through adjusting and improving its properties. The objective of this study is to advance the TSC technology through the use of supplementary cementitious materials (SCMs), fibre reinforcement, capturing its sustainability features to develop novel pavements with very high recycled content, and establishing models with predictive capability for its engineering properties.
Therefore, the fresh and hardened properties of grout mixtures incorporating various SCMs, including fly ash (FA), silica fume (SF) and metakaolin (MK) were investigated. An attempt was made to identify the optimum water-to-binder (w/b) ratio and the high-range water-reducing admixture (HRWRA) dosages for grout mixtures that meet the recommended efflux time (i.e. 35-40 ± 2 sec) according to ACI 304.1. Moreover, the effects of various SCMs at different dosages on the development of TSC mechanical properties were investigated. Likewise, the performance of TSC made with single, binary and ternary binders exposed to different environments conducive to physical and chemical sulfate attack was explored.
The negative influence of fibres on the workability of conventional concrete is eliminated in TSC since the coarse aggregates and fibres are preplaced in the formwork and then injected with a flowable grout. This allows using fibre dosages beyond the practical levels typically adopted in conventionally mixed concrete. Therefore, the mechanical performance of two-stage steel fibre-reinforced concrete (TSSFRC) made with different dosages of steel fibres having various lengths was explored for the first time.
The high coarse aggregate content endows TSC with superior volume stability, making it an ideal contender for pavements and sidewalks, which typically suffer from shrinkage and thermal cracking. In this study, the preplaced material consists of recycled concrete aggregate and scarp tire rubber granules along with scrap tire steel wire fibres, while the grout uses high-volume fly ash. The performance of such a âgreenâ TSC pavement construction technology was explored. Finally, the experimental results were used to create a database which was utilized for developing fuzzy logic (FL) models as a means of predicting the grout flowability (i.e. efflux time and spread flow) and the mechanical properties (i.e. compressive and tensile strength) of a variety of two-stage concrete (TSC) mixtures.
Results indicated that grouts made with water-to-binder ratio (w/b) = 0.45 can achieve the recommended grout flowability for successful TSC production. Moreover, TSC grout properties highly depended on the type and dosage of SCM used. The grout flowability was significantly enhanced as the FA dosage was increased, while the compressive strength was decreased. Partially replacing cement with 10% SF or 10% MK reduced the grout flowability and enhanced its compressive strength. Moreover, the binder composition has a great influence on the TSC mechanical properties. Empirical relationships between the properties of the grout and those of the corresponding TSC were proposed, offering a potential tool for estimating TSC properties based on primary grout properties.
Furthermore, the ease of using a high dosage of pre-placed fibres in TSSFRC allowed achieving exceptional engineering properties for the pre-placed aggregate concrete. Indeed, TSSFRC can easily be produced with 6% steel fibre dosage, which makes it an innovative option and a strong contender in many construction applications.
Fully immersed TSC specimens incorporating FA or MK in sodium sulfate solution exhibited high sulfate resistance. Surprisingly, TSC specimens incorporating SF deteriorated significantly due to thaumasite formation. Under physical sulfate attack exposure, TSC specimens incorporating FA and/or SF incurred severe surface scaling at the evaporative front, while those made with MK exhibited high resistance to surface scaling.
A novel eco-efficient technology for the construction of pavements and sidewalks was proposed. The results demonstrate the feasibility of TSC eco-efficient technology to produce durable and cost-effective sidewalks and pavements, offering ease of placement and superior sustainability features. Finally, the performance of the developed FL models was evaluated using error and statistical analyses. The results indicate that the FL models can offer a flexible, adaptable and reasonably accurate tool for predicting the TSC grout flowability and mechanical properties.
The findings of this study should provide a leap forward in establishing the TSC technology as a strong contender in many construction applications. It contributes to taking the TSC from a basic technology to a more modern system that benefits from advancements in concrete technology through the use of SCMs, chemical admixtures and fibre reinforcement. In particular, in a new context that values sustainability and âgreenâ construction technology, this study has proven TSC to be exceptional in its ability to use recycled materials without the drawbacks observed in normal concrete technology. These findings should contribute to enhancing the understanding of the TSC behaviour, paving the way for its wider implementation in todayâs concrete industry
Cardiac Remodelling and Vulnerability to Ischaemia/Reperfusion Injury with Ageing and High-Fat Diet
Analysis of the mean annual cycle of the dissolved oxygen anomaly in the World Ocean
A global climatology of the dissolved oxygen anomaly (the excess over saturation) is created with monthly resolution in the upper 500 m of the ocean. The climatology is based on dissolved oxygen, temperature and salinity data archived at the National Oceanographic Data Center. Examination of this climatology reveals statistically significant annual cycles throughout the upper 500 m of the World Ocean, though seasonal variations are most coherent in the North Atlantic, where data density is greatest. Vertical trends in the phase and amplitude of the annual cycle are noted. The cycle in surface waters is characterized by a summer maximum and a winter minimum, consistent with warming and high rates of photosynthesis during the summer, and cooling and entrainment of oxygen-depleted water during the winter. In low and middle latitudes, the amplitude increases with depth and the maximum occurs later in the year, a trend consistent with the seasonal accumulation of oxygen associated with the shallow oxygen maximum. At a depth that varies between about 30 and 130 m, the phase of the annual cycle undergoes an abrupt shift. We call this depth the oxygen nodal depth. Below the nodal depth, the annual cycle is characterized by an early-spring maximum and a late-fall minimum, consistent with a cycle dominated by respiration during the spring and summer and replenishment of oxygen from the atmosphere by ventilation during the fall and winter. Below the nodal depth, the amplitude of the annual cycle generally decreases with depth, indicative of decreasing respiration and ventilation rates, or less seasonality in both processes. We postulate that the nodal depth in middle and high latitudes corresponds closely to the summertime compensation depth, where photosynthesis and net community respiration are equal. With this interpretation of the nodal depth and a simple model of the penetration of light in the water column, a compensation light intensity of 1 W mâ2 (4ÎŒE mâ2 sâ1) is deduced, at the low end of independent estimates. Horizontal trends in the phase and amplitude of the annual cycle are also noted. We find that the nodal depth decreases toward the poles in both hemispheres and is generally greater in the Southern Hemisphere, patterns found to be consistent with light-based estimates of the compensation depth. The amplitude of the annual cycle in the oxygen anomaly increases monotonically with latitude, and higher latitudes lag lower latitudes. In the North Atlantic and North Pacific, the amplitude of the annual cycle tends to increase from east to west at all depths and latitudes, as expected considering that physical forcing has greater seasonal variability in the west. The tropics and the North Indian Ocean have features that distinguish them from other regions. Below about 75 m, these waters have pronounced annual cycles of the oxygen anomaly that are shown to be caused mainly by wind-driven adiabatic displacements of the thermocline. A semiannual cycle of the oxygen anomaly is found in the surface waters of the North Indian Ocean, consistent with the known semiannual cycle of surface heat flux in this region
MAT-715: SUSTAINABLE HIGH-VOLUME FLY ASH GROUTS FOR TWO-STAGE CONCRETE
Two-stage concrete (TSC) is a special type of concrete in which coarse aggregates are pre-placed in the formwork and subsequently injected with a grout. Beneficiating fly ash in TSC grouts increases TSC sustainability through the ecological use of large quantities of fly ash, reduced carbon-dioxide emissions associated with cement production, and enhancement of resource productivity of the concrete industry. Limited research has explored the effects of using high volume of fly ash as partial replacement for cement in TSC grout mixtures. Therefore, the flowability of grout mixtures incorporating various fly ash addition rates (i.e. 0%, 30%, 50% and 70%) was evaluated using the flow cone method and spread flow test. Correlations between the efflux time and spread flow for the grout mixtures were developed. Results show that increasing the fly ash addition reduced the grouts efflux time while increasing its spread flow. The optimum high-volume fly ash dosage for achieving high flowability and acceptable TSC compressive strength was identified
Multi-Sensor Fusion for Mono and Multi-Vehicle Localization using Bayesian Network
International audienc
Spatial planning, urban land management, and political architecture In the conflict areas
Theories pertaining to spatial planning and sustainable development have magnificently grown during the second half of the past century and still witness increased rate of attention concerning the manifold aspects encapsulated by their subjects. However, both of these themes still remain underestimated and require further investigation and even augmentation when exploring areas of âpolitical turbulencesâ or âunbalanced powersâ; in other words, regions of âconflict areasâ. The development process in the conflict areas seems to depend ultimately on the scale and magnitude of power between the different contested groups, i.e. the âdominant groupâ and the âweaker groupâ; where sustainability becomes very vulnerable, and if exists, belongs to the dominant group neglecting the weaker one, and even in many cases, exploiting the resources and opportunities of the weaker for the advantage of the dominant, resulting therefore, more marginalizing and social degradation. Hence, new arguments pertaining to sustainability in the conflict areas conclude that sustainable development in these areas can be considered as a âterminology gameâ which does not resolve the older growth debate, but disguises it. Spatial planning in the conflict areas may shape fast-changing or dynamic spatial policies accompanied with irreversible physical layouts that create in many cases multi-dimensional challenges for inhabitants. Especially, for the indigenous residents when considered for one reason or another âa group of minorityâ. Therefore, clarifying the relationship between spatial planning, power and politics is a prominent issue in this doctoral research. Understanding this relation reveals the range of influence of politics upon planning objectives and role. Accordingly, it is a marvelous question to know if planning is an organic reflection of politics or not; as well as, to explore whether spatial planning, in the conflict areas, is used to mitigate or intensify conflict. Based upon theoretical framework, this doctoral research presents comprehensive set of interrelationships between the main parameters affecting the development process in the conflict areas, namely (space, politics, power and planning); these are interestingly elaborated and conceptualized by the researcher within referenced spatial context; i.e. Jerusalem (the case study). Moreover, the direct and implicit role and impacts of these relations were examined. The examination through logical framework (theory â analysis â conception) of the aforementioned parameters (in conflict areas) reveals a maze of dynamic interrelationships which outstandingly guide the development for the benefit of the dominant group. This doctorate research provides critical review for the role of planning whether it acts as âprogressiveâ or âregressiveâ agent of change, especially in the conflict areas with unbalanced powers. In Jerusalem, it has been shown that power and politics are the major planning drivers which set out the development pattern and objectives. Consequently, the spatial and social profiles of Jerusalem have been changing very fast producing new norms of urban fabrics and geographical extents, which all together, constitute manifold challenges to the âindigenousâ Palestinian residents
Genomic epidemiology of the first epidemic wave of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in Palestine.
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the novel coronavirus responsible for the COVID-19 pandemic, continues to cause a significant public-health burden and disruption globally. Genomic epidemiology approaches point to most countries in the world having experienced many independent introductions of SARS-CoV-2 during the early stages of the pandemic. However, this situation may change with local lockdown policies and restrictions on travel, leading to the emergence of more geographically structured viral populations and lineages transmitting locally. Here, we report the first SARS-CoV-2 genomes from Palestine sampled from early March 2020, when the first cases were observed, through to August of 2020. SARS-CoV-2 genomes from Palestine fall across the diversity of the global phylogeny, consistent with at least nine independent introductions into the region. We identify one locally predominant lineage in circulation represented by 50 Palestinian SARS-CoV-2, grouping with genomes generated from Israel and the UK. We estimate the age of introduction of this lineage to 05/02/2020 (16/01/2020-19/02/2020), suggesting SARS-CoV-2 was already in circulation in Palestine predating its first detection in Bethlehem in early March. Our work highlights the value of ongoing genomic surveillance and monitoring to reconstruct the epidemiology of COVID-19 at both local and global scales
MAT-716: GREEN SIDEWALKS USING SUSTAINABLE TWO-STAGE CONCRETE
Two-stage concrete (TSC) is a special type of concrete, which has a high potential for use in sidewalk construction owing to its high volume stability. TSC is characterized by its high coarse aggregate content. Hence, using recycled solid waste materials as a coarse aggregate will increase TSC sustainability, while providing a cost-effective alternative to natural aggregates. Aggregates are pre-placed in TSC. Hence, water absorption by recycled concrete aggregates and the associated rheology problems do not exist in TSC. This study explores the performance of green TSC sidewalks incorporating recycled concrete aggregates (RCA) and crumb rubber from scrap tires. Mechanical properties of the proposed green TSC including compressive strength, modulus of elasticity, flexural strength and toughness, as well as durability to freeze-thaw cycles were investigated. Results show a slight reduction in TSC mechanical properties due to the use of RCA. Moreover, incorporating tire particles reduced TSC mechanical properties significantly, while improving its toughness and freeze-thaw resistance. Addition of recycled tire steel wires allowed to overcome the negative effects on the mechanical properties induced by crumb tire rubber. Therefore, recycling solid waste materials in TSC sidewalks can be an effective strategy to beneficiate such waste materials
The effect of unilateral blood flow restriction on temporal and spatial gait parameters
© 2019 The Authors Blood flow restriction walking (BFR-W) is becoming more frequently used in aerobic and strength training and it has been proposed that BFR-W can be used in clinical populations. BFR-W may change gait stability yet few studies have assessed gait changes during or following BFR-W. The aim of this study was to assess if spatial-temporal gait parameters change during and following BFR-W. Twenty-four participants completed two walking sessions (>48-hours apart); 1) Unilateral BFR-W applied at the dominant thigh, 2) walking without BFR. In each session participants performed a 5-min warmup, 15-min walking intervention and 10-min active recovery. The warmup and active recovery were performed without BFR on both days. Measurements were attained at baseline, during the intervention and post-intervention using the GAITRiteÂź. Linear mixed models were applied to each measured variable. Fixed factors were timepoint (warmup, intervention, and active recovery), condition (BFR-W and control walking) and condition Ă timepoint. Random factors were subject and subject Ă condition. Participants took shorter (3.2-cm (mean difference), CI95%: 0.8â5.6-cm) and wider strides (1.4-cm, CI95%: 0.9â1.9-cm) during BFR-W. For single leg measures, participants took shorter steps (2.8-cm, CI95%: 1.7â4.0-cm) with a faster single support time (7.5-ms, CI95%: 2.9â12.0-ms) on the non-dominant (unoccluded) leg during BFR-W compared to the non-dominant leg during control walking. There were no differences in step length and single support time between the dominant (occluded) leg during BFR-W compared to the dominant leg during control walking. There were no significant changes in velocity, cadence or double support time between BFR-W and control walking (P > 0.05). BFR-W caused small transient changes to several gait parameters. These changes should be considered when using BFR-W in clinical populations
- âŠ