1,530 research outputs found
Dynamic characteristics and processing of fillers in polyurethane elastomers for vibration damping applications
Polyurethane elastomers have the potential of being used to reduce vibrational noise in many engineering applications. The performance of the elastomer is directly related to matching the nature of the mechanical loss characteristics to the frequency and temperature dependence of the source of the vibration. Materials with a broad frequency response and good mechanical properties are desirable for situations were load bearing and isolation becomes an issue. Because automobile, and other related vehicles operate over a broad temperature range, it is desirable for the damping characteristics of the elastomer to ideally be independent of temperature and frequency. In practice, this is not possible and the creation of materials with a broad spectrum response is desirable. In this paper, the effects of various fillers on the breadth and temperature dependence of the vibration damping characteristics of a filled and crosslinked polyurethane elastomer are explored. The fillers studied are wollastonite, barium sulphate and talc. These materials have different shapes, sizes and surface chemistry and undergo different types of interaction with the matrix. The vibration damping characteristics were further varied by the use of a crosslinking agent. Data presented on the rheological characteristics indicate the strength of the filler-polyol interactions. Dielectric relaxation and dynamic mechanical thermal analysis demonstrate the way in which changes in the type of filler, concentration and amount of crosslinker lead to changes in the location and breadth of the energy dissipation process in these elastomers. The vibration damping characteristics of a selected material are presented to demonstrate the potential of these materials
Cooperative Jahn-Teller Distortion in PrO2
We report neutron diffraction data on single crystal PrO2 which reveal a
cooperative Jahn-Teller distortion at TD = 120 +/- 2 K. Below this temperature
an internal distortion of the oxygen sublattice causes the unit cell of the
crystallographic structure to become doubled along one crystal axis. We discuss
several possible models for this structure. The antiferromagnetic structure
below TN = 13.5 K is found to consist of two components, one of which shares
the same doubled unit cell as the distorted crystallographic structure. We also
present measurements of the magnetic susceptibility, the specific heat capacity
and the electrical conductivity of PrO2. The susceptibility data show an
anomaly at a temperature close to TD. From the specific heat capacity data we
deduce that the ground state is doubly degenerate, consistent with a distortion
of the cubic local symmetry. We discuss possible mechanisms for this. The
conductivity shows an activated behaviour with an activation energy Ea = 0.262
+/- 0.003 eV.Comment: 12 pages, 14 figures, 2 tables. Additional suggested structure in v
Fields currents from points
The laws governing the extraction of electrons from metals in high vacua by fields, first developed through experiments with crossed wires, then with fine wire cathodes discharging to cylindrical anodes, have been now found to hold throughout for field currents between points and planes. The theory needed for the quantitative determination of the potential gradients at points is here given, and critical gradients then determined experimentally. The generality of the linear relation between log i and the reciprocal of field-strength is experimentally established
Global model simulations of the impact of ocean-going ships on aerosols, clouds, and the radiation budget
International shipping contributes significantly to the fuel consumption of all transport related activities. Specific emissions of pollutants such as sulfur dioxide (SO<sub>2</sub>) per kg of fuel emitted are higher than for road transport or aviation. Besides gaseous pollutants, ships also emit various types of particulate matter. The aerosol impacts the Earth's radiation budget directly by scattering and absorbing the solar and thermal radiation and indirectly by changing cloud properties. Here we use ECHAM5/MESSy1-MADE, a global climate model with detailed aerosol and cloud microphysics to study the climate impacts of international shipping. The simulations show that emissions from ships significantly increase the cloud droplet number concentration of low marine water clouds by up to 5% to 30% depending on the ship emission inventory and the geographic region. Whereas the cloud liquid water content remains nearly unchanged in these simulations, effective radii of cloud droplets decrease, leading to cloud optical thickness increase of up to 5&ndash;10%. The sensitivity of the results is estimated by using three different emission inventories for present-day conditions. The sensitivity analysis reveals that shipping contributes to 2.3% to 3.6% of the total sulfate burden and 0.4% to 1.4% to the total black carbon burden in the year 2000 on the global mean. In addition to changes in aerosol chemical composition, shipping increases the aerosol number concentration, e.g. up to 25% in the size range of the accumulation mode (typically &gt;0.1 μm) over the Atlantic. The total aerosol optical thickness over the Indian Ocean, the Gulf of Mexico and the Northeastern Pacific increases by up to 8&ndash;10% depending on the emission inventory. Changes in aerosol optical thickness caused by shipping induced modification of aerosol particle number concentration and chemical composition lead to a change in the shortwave radiation budget at the top of the atmosphere (ToA) under clear-sky condition of about &minus;0.014 W/m² to &minus;0.038 W/m² for a global annual average. The corresponding all-sky direct aerosol forcing ranges between &minus;0.011 W/m² and &minus;0.013 W/m². The indirect aerosol effect of ships on climate is found to be far larger than previously estimated. An indirect radiative effect of &minus;0.19 W/m² to &minus;0.60 W/m² (a change in the atmospheric shortwave radiative flux at ToA) is calculated here, contributing 17% to 39% of the total indirect effect of anthropogenic aerosols. This contribution is high because ship emissions are released in regions with frequent low marine clouds in an otherwise clean environment. In addition, the potential impact of particulate matter on the radiation budget is larger over the dark ocean surface than over polluted regions over land
Soft Listeria: actin-based propulsion of liquid drops
We study the motion of oil drops propelled by actin polymerization in cell
extracts. Drops deform and acquire a pear-like shape under the action of the
elastic stresses exerted by the actin comet. We solve this free boundary
problem and calculate the drop shape taking into account the elasticity of the
actin gel and the variation of the polymerization velocity with normal stress.
The pressure balance on the liquid drop imposes a zero propulsive force if
gradients in surface tension or internal pressure are not taken into account.
Quantitative parameters of actin polymerization are obtained by fitting theory
to experiment.Comment: 5 pages, 4 figure
Electric double layer dynamics by high-field electroluminescence in aqueous solution (Destriau effect)
Machine-learned cloud classes from satellite data for process-oriented climate model evaluation
Clouds play a key role in regulating climate change but are difficult to
simulate within Earth system models (ESMs). Improving the representation of
clouds is one of the key tasks towards more robust climate change projections.
This study introduces a new machine-learning based framework relying on
satellite observations to improve understanding of the representation of clouds
and their relevant processes in climate models. The proposed method is capable
of assigning distributions of established cloud types to coarse data. It
facilitates a more objective evaluation of clouds in ESMs and improves the
consistency of cloud process analysis. The method is built on satellite data
from the MODIS instrument labelled by deep neural networks with cloud types
defined by the World Meteorological Organization (WMO), using cloud type labels
from CloudSat as ground truth. The method is applicable to datasets with
information about physical cloud variables comparable to MODIS satellite data
and at sufficiently high temporal resolution. We apply the method to
alternative satellite data from the Cloud\_cci project (ESA Climate Change
Initiative), coarse-grained to typical resolutions of climate models. The
resulting cloud type distributions are physically consistent and the horizontal
resolutions typical of ESMs are sufficient to apply our method. We recommend
outputting crucial variables required by our method for future ESM data
evaluation. This will enable the use of labelled satellite data for a more
systematic evaluation of clouds in climate models.Comment: Main Paper 16 pages, 11 figures. Supporting material 7 Pages, 8
figures. This work has been submitted to the IEEE for possible publication.
Copyright may be transferred without notice, after which this version may no
longer be accessibl
Overview of the Coupled Model Intercomparison Project Phase 6 (CMIP6) experimental design and organization
International audienceBy coordinating the design and distribution of global climate model simulations of the past, current, and future climate, the Coupled Model Intercomparison Project (CMIP) has become one of the foundational elements of climate science. However, the need to address an ever-expanding range of scientific questions arising from more and more research communities has made it necessary to revise the organization of CMIP. After a long and wide community consultation, a new and more federated structure has been put in place. It consists of three major elements: (1) a handful of common experiments, the DECK (Diagnostic, Evaluation and Characterization of Klima) and CMIP historical simulations (1850–near present) that will maintain continuity and help document basic characteristics of models across different phases of CMIP; (2) common standards, coordination, infrastructure, and documentation that will facilitate the distribution of model outputs and the characterization of the model ensemble; and (3) an ensemble of CMIP-Endorsed Model Intercomparison Projects (MIPs) that will be specific to a particular phase of CMIP (now CMIP6) and that will build on the DECK and CMIP historical simulations to address a large range of specific questions and fill the scientific gaps of the previous CMIP phases. The DECK and CMIP historical simulations, together with the use of CMIP data standards, will be the entry cards for models participating in CMIP. Participation in CMIP6-Endorsed MIPs by individual modelling groups will be at their own discretion and will depend on their scientific interests and priorities. With the Grand Science Challenges of the World Climate Research Programme (WCRP) as its scientific backdrop, CMIP6 will address three broad questions: – How does the Earth system respond to forcing? – What are the origins and consequences of systematic model biases? – How can we assess future climate changes given internal climate variability, predictability, and uncertainties in scenarios? This CMIP6 overview paper presents the background and rationale for the new structure of CMIP, provides a detailed description of the DECK and CMIP6 historical simulations, and includes a brief introduction to the 21 CMIP6-Endorsed MIPs
- …