Flow characteristics of carbon fibre moulding compounds

This paper presents the development of a low-cost carbon fibre moulding compound using an automated spray deposition process. Directed Fibre Compounding (DFC) is used to produce charge packs directly from low cost carbon fibre tows and liquid epoxy resin. A range of material and process related parameters have been studied to understand their influence on the level of macroscopic charge flow, in an attempt to produce a carbon fibre moulding compound with similar flow characteristics to conventional glass fibre SMCs. Charge packs covering just 40% of the mould can be effectively used to process DFC, without detrimentally affecting void content, fibre distribution and mechanical properties. Tensile stiffness and strength values of 36GPa and 320MPa are reported for isotropic materials (100% charge coverage), which increase to 46GPa and 408MPa with flow induced alignment (50% charge coverage) at 50% fibre volume fraction

Mineral resource information in support of national, regional and local planning : Cheshire (comprising Cheshire, Boroughs of Halton and Warrington)

This report is one of a series prepared by the British Geological Survey for various administrative areas in England for the Office of the Deputy Prime Minister’s research project Mineral Resource Information in Support of National, Regional and Local Planning. The accompanying map relates to the county of Cheshire (comprising Cheshire, Boroughs of Halton and Warrington), and delineates the mineral resources of current, or potential, economic interest in the area and the sites where minerals are or have been worked. It also relates these to national planning designations, which may represent constraints on the extraction of minerals. Three major elements of information are presented: • the geological distribution and importance of mineral resources; • the extent of mineral planning permissions and the location of current mineral workings; and • the extent of selected, nationally-designated planning constraints. This wide range of information, much of which is scattered and not always available in a consistent and convenient form, is presented on a digitally-generated summary map on the scale of 1:100 000. This scale is convenient for the overall display of the data and allows for a legible topographic base on which to depict the information. However, all the data are held digitally at larger scales using a Geographical Information System (GIS), which allows easy revision, updating and customisation of the information together with its possible integration with other datasets. The information will form part of a Summary of the Mineral Resources of the North West Region. The purpose of the work is to assist all interested parties involved in the preparation and review of development plans, both in relation to the extraction of minerals and the protection of mineral resources from sterilisation. It provides a knowledge base, in a consistent format, on the nature and extent of mineral resources and the environmental constraints, which may affect their extraction. An important objective is to provide baseline data for the long term. The results may also provide a starting point for discussion on specific planning proposals for minerals extraction or on proposals, which may sterilise resources. It is anticipated that the map and report will also provide valuable background data for a much wider audience, including the different sectors of the minerals industry, other agencies and authorities (e.g. The Planning Inspectorate Agency, the Environment Agency, The Countryside Agency and English Nature), environmental interests and the general public. Basic mineral resource information is essential to support mineral exploration and development activities, for resource management and land-use planning, and to establish baseline data for environmental impact studies and environmental guidelines. It also enables a more sustainable pattern and standard of development to be achieved by valuing mineral resources as national assets. The mineral resources covered are sand and gravel, crushed rock aggregate, silica sand, salt, brick clay, building stones, peat, coal, hydrocarbons and metalliferous mineralisation

Mineral resource information in support of national, regional and local planning : Gloucestershire (comprising Gloucestershire and South Gloucestershire)

This report is one of a series prepared by the British Geological Survey for various administrative areas in England for the Office of the Deputy Prime Minister’s research project Mineral Resource Information in Support of National, Regional and Local Planning. The accompanying map relates to the county of Gloucestershire, comprising Gloucestershire and South Gloucestershire, and delineates the mineral resources of current, or potential, economic interest in the area and the sites where minerals are or have been worked. It also relates these to national planning designations, which may represent constraints on the extraction of minerals. Three major elements of information are presented: • the geological distribution and importance of mineral resources; • the extent of mineral planning permissions and the location of current mineral workings; and • the extent of selected, nationally-designated planning constraints. This wide range of information, much of which is scattered and not always available in a consistent and convenient form, is presented on a digitally-generated summary map on the scale of 1:100 000. This scale is convenient for the overall display of the data and allows for a legible topographic base on which to depict the information. However, all the data are held digitally at larger scales using a Geographical Information System (GIS), which allows easy revision, updating and customisation of the information together with its possible integration with other datasets. The information will form part of a Summary of the Mineral Resources of the South West Region. The purpose of the work is to assist all interested parties involved in the preparation and review of development plans, both in relation to the extraction of minerals and the protection of mineral resources from sterilisation. It provides a knowledge base, in a consistent format, on the nature and extent of mineral resources and the environmental constraints, which may affect their extraction. An important objective is to provide baseline data for the long term. The results may also provide a starting point for discussions on specific planning proposals for mineral extraction or on proposals, which may sterilise resources. It is anticipated that the maps and report will also provide valuable background data for a much wider audience, including the different sectors of the minerals industry, other agencies and authorities (e.g. The Planning Inspectorate Agency, the Environment Agency, the Countryside Agency and English Nature), environmental interests and the general public. Basic mineral resource information is essential to support mineral exploration and development activities, for resource management and land-use planning, and to establish baseline data for environmental impact studies and environmental guidelines. It also enables a more sustainable pattern and standard of development to be achieved by valuing mineral resources as national assets. The mineral resources covered are sand and gravel, bedrock sand, crushed rock aggregate, building stone, hydrocarbons, and coal

Mineral resource information in support of national, regional and local planning : Suffolk

This report is one of a series prepared by the British Geological Survey for various administrative areas in England for the Office of the Deputy Prime Minister's research project Mineral Resource Information in Support of National, Regional and Local Planning. The accompanying map relates to the county of Suffolk and delineates the mineral resources of current, or potential, economic interest in the area and the sites where minerals are or have been worked. It also relates these to national planning designations, which may represent constraints on the extraction of minerals. Three major elements of information are presented: • the geological distribution and importance of mineral resources; • the extent of mineral planning permissions and the location of current mineral workings, and • the extent of selected, nationally-designated planning constraints. This wide range of information, much of which is scattered and not always available in a consistent and convenient form, is presented on a digitally-generated summary map on the scale of 1:100 000. This scale is convenient for the overall display of the data and allows for a legible topographic base on which to depict the information. However, all the data are held digitally at larger scales using a Geographical Information System (GIS), which allows easy revision, updating and customisation of the information together with its possible integration with other datasets. The information will form part of a Summary of the Mineral Resources of the East of England Region. The purpose of the work is to assist all interested parties involved in the preparation and review of development plans, both in relation to the extraction of minerals and the protection of mineral resources from sterilisation. It provides a knowledge base, in a consistent format, on the nature and extent of mineral resources and the environmental constraints, which may affect their extraction. An important objective is to provide baseline data for the long term. The results may also provide a starting point for discussions on specific planning proposals for mineral extraction or on proposals, which may sterilise resources. It is anticipated that the maps and report will also provide valuable background data for a much wider audience, including the different sectors of the minerals industry, other agencies and authorities (e.g. The Planning Inspectorate Agency, the Environment Agency, the Countryside Agency and English Nature), environmental interests and the general public. Basic mineral resource information is essential to support mineral exploration and development activities, for resource management and land-use planning, and to establish baseline data for environmental impact studies and environmental guidelines. It also enables a more sustainable pattern and standard of development to be achieved by valuing mineral resources as national assets. The mineral resources covered are sand and gravel, brick clay, hydrocarbons, building stone, chalk and peat

Modeling phase behavior for quantifying micro-pervaporation experiments

We present a theoretical model for the evolution of mixture concentrations in a micro-pervaporation device, similar to those recently presented experimentally. The described device makes use of the pervaporation of water through a thin PDMS membrane to build up a solute concentration profile inside a long microfluidic channel. We simplify the evolution of this profile in binary mixtures to a one-dimensional model which comprises two concentration-dependent coefficients. The model then provides a link between directly accessible experimental observations, such as the widths of dense phases or their growth velocity, and the underlying chemical potentials and phenomenological coefficients. It shall thus be useful for quantifying the thermodynamic and dynamic properties of dilute and dense binary mixtures.Comment: to be published in EPJ-

Prepotential and Instanton Corrections in N=2 Supersymmetric SU(N_1)xSU(N_2) Yang Mills Theories

In this paper we analyse the non-hyperelliptic Seiberg-Witten curves derived from M-theory that encode the low energy solution of N=2 supersymmetric theories with product gauge groups. We consider the case of a SU(N_1)xSU(N_2) gauge theory with a hypermultiplet in the bifundamental representation together with matter in the fundamental representations of SU(N_1) and SU(N_2). By means of the Riemann bilinear relations that hold on the Riemann surface defined by the Seiberg--Witten curve, we compute the logarithmic derivative of the prepotential with respect to the quantum scales of both gauge groups. As an application we develop a method to compute recursively the instanton corrections to the prepotential in a straightforward way. We present explicit formulas for up to third order on both quantum scales. Furthermore, we extend those results to SU(N) gauge theories with a matter hypermultiplet in the symmetric and antisymmetric representation. We also present some non-trivial checks of our results.Comment: 21 pages, 2 figures, minor changes and references adde

The calibration of the Sudbury Neutrino Observatory using uniformly distributed radioactive sources

The production and analysis of distributed sources of 24Na and 222Rn in the Sudbury Neutrino Observatory (SNO) are described. These unique sources provided accurate calibrations of the response to neutrons, produced through photodisintegration of the deuterons in the heavy water target, and to low energy betas and gammas. The application of these sources in determining the neutron detection efficiency and response of the 3He proportional counter array, and the characteristics of background Cherenkov light from trace amounts of natural radioactivity is described.Comment: 24 pages, 13 figure

Parity Violation in Proton-Proton Scattering

Measurements of parity-violating longitudinal analyzing powers (normalized asymmetries) in polarized proton-proton scattering provide a unique window on the interplay between the weak and strong interactions between and within hadrons. Several new proton-proton parity violation experiments are presently either being performed or are being prepared for execution in the near future: at TRIUMF at 221 MeV and 450 MeV and at COSY (Kernforschungsanlage Juelich) at 230 MeV and near 1.3 GeV. These experiments are intended to provide stringent constraints on the set of six effective weak meson-nucleon coupling constants, which characterize the weak interaction between hadrons in the energy domain where meson exchange models provide an appropriate description. The 221 MeV is unique in that it selects a single transition amplitude (3P2-1D2) and consequently constrains the weak meson-nucleon coupling constant h_rho{pp}. The TRIUMF 221 MeV proton-proton parity violation experiment is described in some detail. A preliminary result for the longitudinal analyzing power is Az = (1.1 +/-0.4 +/-0.4) x 10^-7. Further proton-proton parity violation experiments are commented on. The anomaly at 6 GeV/c requires that a new multi-GeV proton-proton parity violation experiment be performed.Comment: 13 Pages LaTeX, 5 PostScript figures, uses espcrc1.sty. Invited talk at QULEN97, International Conference on Quark Lepton Nuclear Physics -- Nonperturbative QCD Hadron Physics & Electroweak Nuclear Processes --, Osaka, Japan May 20--23, 199

Transport by molecular motors in the presence of static defects

The transport by molecular motors along cytoskeletal filaments is studied theoretically in the presence of static defects. The movements of single motors are described as biased random walks along the filament as well as binding to and unbinding from the filament. Three basic types of defects are distinguished, which differ from normal filament sites only in one of the motors' transition probabilities. Both stepping defects with a reduced probability for forward steps and unbinding defects with an increased probability for motor unbinding strongly reduce the velocities and the run lengths of the motors with increasing defect density. For transport by single motors, binding defects with a reduced probability for motor binding have a relatively small effect on the transport properties. For cargo transport by motors teams, binding defects also change the effective unbinding rate of the cargo particles and are expected to have a stronger effect.Comment: 20 pages, latex, 7 figures, 1 tabl