New aerodynamic lens injector for single particle diffractive imaging

An aerodynamic lens injector was developed specifically for the needs of single-particle diffractive imaging experiments at free-electron lasers. Its design allows for quick changes of injector geometries and focusing properties in order to optimize injection for specific individual samples. Here, we present results of its first use at the FLASH free-electron-laser facility. Recorded diffraction patterns of polystyrene spheres are modeled using Mie scattering, which allowed for the characterization of the particle beam under diffractive-imaging conditions and yield good agreement with particle-trajectory simulations

Time-resolved single-particle x-ray scattering reveals electron-density as coherent plasmonic-nanoparticle-oscillation source

Dynamics of optically-excited plasmonic nanoparticles are presently understood as a series of sequential scattering events, involving thermalization processes after pulsed optical excitation. One important step is the initiation of nanoparticle breathing oscillations. According to established experiments and models, these are caused by the statistical heat transfer from thermalized electrons to the lattice. An additional contribution by hot electron pressure has to be included to account for phase mismatches that arise from the lack of experimental data on the breathing onset. We used optical transient-absorption spectroscopy and time-resolved single-particle x-ray-diffractive imaging to access the excited electron system and lattice. The time-resolved single-particle imaging data provided structural information directly on the onset of the breathing oscillation and confirmed the need for an additional excitation mechanism to thermal expansion, while the observed phase-dependence of the combined structural and optical data contrasted previous studies. Therefore, we developed a new model that reproduces all our experimental observations without using fit parameters. We identified optically-induced electron density gradients as the main driving source.Comment: 32 pages, 5 figures, 1 supporting information document include

On the use of multilayer Laue lenses with X-ray Free Electron Lasers

Multilayer Laue lenses were used for the first time to focus x-rays from an X-ray Free Electron Laser (XFEL). In an experiment, which was performed at the European XFEL, we demonstrated focusing to a spot size of a few tens of nanometers. A series of runs in which the number of pulses per train was increased from 1 to 2, 3, 4, 5, 6, 7, 10, 20 and 30 pulses per train, all with a pulse separation of 3.55 us, was done using the same set of lenses. The increase in the number of pulses per train was accompanied with an increase of x-ray intensity (transmission) from 9% to 92% at 5 pulses per train, and then the transmission was reduced to 23.5 % when the pulses were increased further. The final working condition was 30 pulses per train and 23.5% transmission. Only at this condition we saw that the diffraction efficiency of the MLLs changed over the course of a pulse train, and this variation was reproducible from train to train. We present the procedure to align and characterize these lenses and discuss challenges working with the pulse trains from this unique x-ray source

3D diffractive imaging of nanoparticle ensembles using an X-ray laser

We report the 3D structure determination of gold nanoparticles (AuNPs) by X-ray single particle imaging (SPI). Around 10 million diffraction patterns from gold nanoparticles were measured in less than 100 hours of beam time, more than 100 times the amount of data in any single prior SPI experiment, using the new capabilities of the European X-ray free electron laser which allow measurements of 1500 frames per second. A classification and structural sorting method was developed to disentangle the heterogeneity of the particles and to obtain a resolution of better than 3 nm. With these new experimental and analytical developments, we have entered a new era for the SPI method and the path towards close-to-atomic resolution imaging of biomolecules is apparent

Charge-State Distribution of Aerosolized Nanoparticles

In single-particle imaging experiments, beams of individual nanoparticles are exposed to intense pulses of X-rays from free-electron lasers to record diffraction patterns of single, isolated molecules. The reconstruction for structure determination relies on signals from many identical particles. Therefore, well-defined-sample delivery conditions are desired in order to achieve sample uniformity, including avoidance of charge polydispersity. We have observed charging of 220 nm polystyrene particles in an aerosol beam created by a gas-dynamic virtual nozzle focusing technique, without intentional charging of the nanoparticles. Here, we present a deflection method for detecting and characterizing the charge states of a beam of aerosolized nanoparticles. Our analysis of the observed charge-state distribution using optical light-sheet localization microscopy and quantitative particle trajectory simulations is consistent with previous descriptions of skewed charging probabilities of triboelectrically charged nanoparticles

Controlled beams of shockfrozen, isolated, biological and artificial nanoparticles

X-ray free-electron lasers (XFELs) promise the diffractive imaging of single molecules and nanoparticles with atomic spatial resolution. This relies on the averaging of millions of diffraction patternsoff identical particles, which should ideally be isolated in the gas phase and shockfrozen in theirnative structure. Here, we demonstrated that polystyrene nanospheres and Cydia pomonella granulovirus can be transferred into the gas phase, isolated, and very quickly shockfrozen, i. e., cooled to4 K within microseconds in a helium-buffer-gas cell, much faster than state-of-the-art approaches.Nanoparticle beams emerging from the cell were characterised using particle-localisation microscopywith light-sheet illumination, which allowed for the full reconstruction of the particle beams, focusedto < 100 µm, as well as for the determination of particle flux and number density. The experimentalresults were quantitatively reproduced and rationalised through particle-trajectory simulations. Wepropose an optimised setup with cooling rates for few-nanometers particles on nanoseconds timescales.The produced beams of shockfrozen isolated nanoparticles provide a breakthrough in sample delivery,e. g., for diffractive imaging and microscopy or low-temperature nanoscience

Heterogeneous Chemistry of Lipopolysaccharides with Gas-Phase Nitric Acid: Reactive Sites and Reaction Pathways

Recent studies have shown that sea spray aerosol (SSA) has a size-dependent, complex composition consisting of biomolecules and biologically derived organic compounds in addition to salts. This additional chemical complexity most likely influences the heterogeneous reactivity of SSA, as these other components will have different reactive sites and reaction pathways. In this study, we focus on the reactivity of a class of particles derived from some of the biological components of sea spray aerosol including lipopolysaccharides (LPS) that undergo heterogeneous chemistry within the reactive sites of the biological molecule. Examples of these reactions and the relevant reactive sites are proposed as follows: R–COONa_(s) + HNO_3(g) → NaNO₃ + R–COOH and R–HPO₄Na_(s) + HNO_3(g) → NaNO₃ + R–H₂PO₄. These reactions may be a heterogeneous pathway not only for sea spray aerosol but also for a variety of other types of atmospheric aerosol as well

Linking hygroscopicity and the surface microstructure of model inorganic salts, simple and complex carbohydrates, and authentic sea spray aerosol particles.

Individual airborne sea spray aerosol (SSA) particles show diversity in their morphologies and water uptake properties that are highly dependent on the biological, chemical, and physical processes within the sea subsurface and the sea surface microlayer. In this study, hygroscopicity data for model systems of organic compounds of marine origin mixed with NaCl are compared to data for authentic SSA samples collected in an ocean-atmosphere facility providing insights into the SSA particle growth, phase transitions and interactions with water vapor in the atmosphere. In particular, we combine single particle morphology analyses using atomic force microscopy (AFM) with hygroscopic growth measurements in order to provide important insights into particle hygroscopicity and the surface microstructure. For model systems, a range of simple and complex carbohydrates were studied including glucose, maltose, sucrose, laminarin, sodium alginate, and lipopolysaccharides. The measured hygroscopic growth was compared with predictions from the Extended-Aerosol Inorganics Model (E-AIM). It is shown here that the E-AIM model describes well the deliquescence transition and hygroscopic growth at low mass ratios but not as well for high ratios, most likely due to a high organic volume fraction. AFM imaging reveals that the equilibrium morphology of these single-component organic particles is amorphous. When NaCl is mixed with the organics, the particles adopt a core-shell morphology with a cubic NaCl core and the organics forming a shell similar to what is observed for the authentic SSA samples. The observation of such core-shell morphologies is found to be highly dependent on the salt to organic ratio and varies depending on the nature and solubility of the organic component. Additionally, single particle organic volume fraction AFM analysis of NaCl : glucose and NaCl : laminarin mixtures shows that the ratio of salt to organics in solution does not correspond exactly for individual particles - showing diversity within the ensemble of particles produced even for a simple two component system