Ablation article and method

An ablation article, such as a conical heat shield, having an ablating surface is provided with at least one discrete area of at least one seed material, such as aluminum. When subjected to ablation conditions, the seed material is ablated. Radiation emanating from the ablated seed material is detected to analyze ablation effects without disturbing the ablation surface. By providing different seed materials having different radiation characteristics, the ablating effects on various areas of the ablating surface can be analyzed under any prevailing ablation conditions. The ablating article can be provided with means for detecting the radiation characteristics of the ablated seed material to provide a self-contained analysis unit

Optical scanning tests of complex CMOS microcircuits

The new test method was based on the use of a raster-scanned optical stimulus in combination with special electrical test procedures. The raster-scanned optical stimulus was provided by an optical spot scanner, an instrument that combines a scanning optical microscope with electronic instrumentation to process and display the electric photoresponse signal induced in a device that is being tested

Comparison of Gaussian process modeling software

Gaussian process fitting, or kriging, is often used to create a model from a set of data. Many available software packages do this, but we show that very different results can be obtained from different packages even when using the same data and model. We describe the parameterization, features, and optimization used by eight different fitting packages that run on four different platforms. We then compare these eight packages using various data functions and data sets, revealing that there are stark differences between the packages. In addition to comparing the prediction accuracy, the predictive variance--which is important for evaluating precision of predictions and is often used in stopping criteria--is also evaluated

Effect of Urea and Distillers Inclusion in Dry- Rolled Corn Based Diets on Heifer Performance and Carcass Characteristics

Crossbred heifers (n=96, BW = 810 ± 20) were utilized to evaluate the effects of increasing wet distillers grains plus solubles and urea inclusion in a dry rolled corn based finishing diet on performance and carcass characteristics. Heifers were individually fed using a calan gate system with a 2 × 2 factorial arrangement of treatments. Factors included distillers inclusion at either 10 or 20% of diet DM and urea inclusion at either 0.2 or 1.4% of diet DM. Th ere was no difference for final body weight, average daily gain, and feed conversion on a live or carcass adjusted basis for either urea or distillers inclusion in the diet. Dry matter intake was reduced with increased urea inclusion; however, distillers inclusion did not influence intake. Added distillers and urea in the diet had minimal impact on performance suggesting supplemental urea in a dry rolled corn based finishing diets is of minimal benefit when feeding at least 10% distillers grains

Electromagnetic radiation screening of microcircuits for long life applications

The utility of X-rays as a stimulus for screening high reliability semiconductor microcircuits was studied. The theory of the interaction of X-rays with semiconductor materials and devices was considered. Experimental measurements of photovoltages, photocurrents, and effects on specified parameters were made on discrete devices and on microcircuits. The test specimens included discrete devices with certain types of identified flaws and symptoms of flaws, and microcircuits exhibiting deviant electrical behavior. With a necessarily limited sample of test specimens, no useful correlation could be found between the X-ray-induced electrical response and the known or suspected presence of flaws

Energy, Transportation, Air Quality, Climate Change, Health Nexus: Sustainable Energy is Good for Our Health

Citation: Erickson, L. E., & Jennings, M. (2017). Energy, Transportation, Air Quality, Climate Change, Health Nexus: Sustainable Energy is Good for Our Health. Aims Public Health, 4(1), 47-61. doi:10.3934/publichealth.2017.1.47The Paris Agreement on Climate Change has the potential to improve air quality and human health by encouraging the electrification of transportation and a transition from coal to sustainable energy. There will be human health benefits from reducing combustion emissions in all parts of the world. Solar powered charging infrastructure for electric vehicles adds renewable energy to generate electricity, shaded parking, and a needed charging infrastructure for electric vehicles that will reduce range anxiety. The costs of wind power, solar panels, and batteries are falling because of technological progress, magnitude of commercial activity, production experience, and competition associated with new trillion dollar markets. These energy and transportation transitions can have a very positive impact on health. The energy, transportation, air quality, climate change, health nexus may benefit from additional progress in developing solar powered charging infrastructure

Evaluation of Masters Choice Corn Silage on Growing Steer Performance

A growing study evaluated three corn silage hybrids on growing steer performance. Th e three hybrids were: a conventional hybrid- Farm Choice (CON) commonly grown in Eastern Nebraska which served as the control, Masters Choice hybrids MCT6365 RIB (MC1) selected to improve fi ber and starch digestion and MCT6733 GT3000 (MC2) that has been selected to improve fi ber digestion in cattle. Relative to CON, feeding hybrid MC1 resulted in similar DMI, but numerically increased ADG which significantly improved F:G compared to CON. Feeding MC2 led to greater DMI, similar ADG, and poorer (greater) F:G compared to CON. Feeding Masters Choice hybrid MCT6365 RIB (MC1) corn silage at 80% of the diet DM likely improved digestion and energy availability to the steers, which allowed greater ADG and improved F:G, while the opposite was true for MC2. Differences in hybrids exist when fed to growing cattle at 80% of the diet

The ionization structure of the Orion nebula: Infrared line observations and models

Observations of the (O III) 52 and 88 micron lines and the (N III) 57 micron line have been made at 6 positions and the (Ne III) 36 micron line at 4 positions in the Orion Nebula to probe its ionization structure. The measurements, made with a -40" diameter beam, were spaced every 45" in a line south from and including the Trapezium. The wavelength of the (Ne III) line was measured to be 36.013 + or - 0.004 micron. Electron densities and abundance ratios of N(++)/O(++) have been calculated and compared to other radio and optical observations. Detailed one component and two component (bar plus halo) spherical models were calculated for exciting stars with effective temperatures of 37 to 40,000K and log g = 4.0 and 4.5. Both the new infrared observations and the visible line measurements of oxygen and nitrogen require T sub eff approx less than 37,000K. However, the double ionized neon requires a model with T sub eff more than or equal to 39,000K, which is more consistent with that inferred from the radio flux or spectral type. These differences in T sub eff are not due to effects of dust on the stellar radiation field, but are probably due to inaccuracies in the assumed stellar spectrum. The observed N(++)/O(++) ratio is almost twice the N(+)/O(+) ratio. The best fit models give N/H = 8.4 x 10 to the -5 power, O/H = 4.0 x 10 to the -4 power, and Ne/H = 1.3 x 10 to the -4 power. Thus neon and nitrogen are approximately solar, but oxygen is half solar in abundance. From the infrared O(++) lines it is concluded that the ionization bar results from an increase in column depth rather than from a local density enhancement