Effects of Chronic Waterborne Nickle Exposure on Two Successive Generations of \u3cem\u3eDaphnia Magna\u3c/em\u3e

In a 21-d chronic toxicity test in which an F0 generation of Daphnia magna were exposed to waterborne Ni, the noobservable-effect concentration (for survival, reproduction, and growth) was 42 μg Ni L-1, or 58% of the measured 21-d median lethal concentration (LC50) of 71.9 μg Ni L-1 (95% confidence interval, 56.5–95.0). Chronic exposure to 85 μg Ni L-1 caused marked decreases in survival, reproduction, and growth in F0 animals. In the F1 generation (daphnids born of mothers from the chronically exposed F0 generation), animals chronically exposed to 42 μg Ni L-1 for 11 d weighed significantly less (20%) than controls, indicating increased sensitivity of F1 animals. Additionally, in this successive generation, significant decreases in whole-body levels of metabolites occurred following exposure to both 42 μg Ni L-1 (decreased glycogen and adenosine triphosphate [ATP]) and 21 μg Ni L-1 (decreased ATP). No significant changes were observed in whole-body total lipid, total protein, and lactate levels at any concentration. Whereas F1 neonates with mothers that were exposed to 21 μg Ni L-1 showed increased resistance to acute Ni challenge, as measured by a significant (83%) increase in the acute (48-h) LC50, F1 neonates with mothers that were exposed to 42 μg Ni L-1 were no more tolerant of acute Ni challenge than control animals were. Nickel accumulations in F1 animals chronically exposed to 21 and 42 μg Ni L-1 were 11- and 18-fold, respectively, above control counterparts. The data presented suggest that chronic Ni exposure to two successive generations of D. magna lowered the overall energy state in the second generation. Whereas the quantity of neonates produced was not affected, the quality was; thus, environmentally meaningful criteria for regulating waterborne Ni concentrations in freshwater require consideration of possible multigenerational effects

A Research Paper Presented to The Department of Educational Administration and Counseling

I began to seriously think about teaching as a career during my senior year of high school. Before that, I knew I was going to college, but I had no idea what I was going to study. I was going to play football, and if I learned something along the way that was fine. A knee injury during the third game of my senior year quickly altered any thought of ever playing football again. I knew I wanted to stay around football and figured the only way to do that was to coach. Teaching was going to be the vehicle for me to achieve that goal. I liked history class during high school, so I declared to be a History Major at Iowa State University. Two things that I had not accounted for when I enrolled at Iowa State University was the new foreign language requirement for incoming freshman history majors and the bleak job outlook for social studies teachers. These two concerns made me change my major during my sophomore year to elementary education. The College of Education had no foreign language requirements, the job prospects for a male elementary teacher were unlimited, I could still teach social studies, and I could coach

Multi-Mission Power Analysis Tool (MMPAT) Version 3

The Multi-Mission Power Analysis Tool (MMPAT) simulates a spacecraft power subsystem including the power source (solar array and/or radioisotope thermoelectric generator), bus-voltage control, secondary battery (lithium-ion or nickel-hydrogen), thermostatic heaters, and power-consuming equipment. It handles multiple mission types including heliocentric orbiters, planetary orbiters, and surface operations. Being parametrically driven along with its user-programmable features can reduce or even eliminate any need for software modifications when configuring it for a particular spacecraft. It provides multiple levels of fidelity, thereby fulfilling the vast majority of a project s power simulation needs throughout the lifecycle. It can operate in a stand-alone mode with a graphical user interface, in batch mode, or as a library linked with other tools. This software can simulate all major aspects of a spacecraft power subsystem. It is parametrically driven to reduce or eliminate the need for a programmer. Added flexibility is provided through user-designed state models and table-driven parameters. MMPAT is designed to be used by a variety of users, such as power subsystem engineers for sizing power subsystem components; mission planners for adjusting mission scenarios using power profiles generated by the model; system engineers for performing system- level trade studies using the results of the model during the early design phases of a spacecraft; and operations personnel for high-fidelity modeling of the essential power aspect of the planning picture

Improved Thermoelectric Cooling Based on the Thomson Effect

Traditional thermoelectric Peltier coolers exhibit a cooling limit which is primarily determined by the figure of merit, zT. Rather than a fundamental thermodynamic limit, this bound can be traced to the difficulty of maintaining thermoelectric compatibility. Self-compatibility locally maximizes the cooler's coefficient of performance for a given zT and can be achieved by adjusting the relative ratio of the thermoelectric transport properties that make up zT. In this study, we investigate the theoretical performance of thermoelectric coolers that maintain self-compatibility across the device. We find such a device behaves very differently from a Peltier cooler, and term self-compatible coolers "Thomson coolers" when the Fourier heat divergence is dominated by the Thomson, as opposed to the Joule, term. A Thomson cooler requires an exponentially rising Seebeck coefficient with increasing temperature, while traditional Peltier coolers, such as those used commercially, have comparatively minimal change in Seebeck coefficient with temperature. When reasonable material property bounds are placed on the thermoelectric leg, the Thomson cooler is predicted to achieve approximately twice the maximum temperature drop of a traditional Peltier cooler with equivalent figure of merit (zT). We anticipate the development of Thomson coolers will ultimately lead to solid state cooling to cryogenic temperatures.Comment: The Manuscript has been revised for publication in PR

Constructed Wetlands for Agricultural Wastewater Treatment in Northeastern North America:A Review

Constructed wetlands (CW) are a treatment option for agricultural wastewater. Their ability to adequately function in cold climates continues to be evaluated as they are biologically active systems that depend on microbial and plant activity. In order to assess their performance and to highlight regional specific design considerations, a review of CWs in Eastern Canada and the Northeastern USA was conducted. Here, we synthesize performance data from 21 studies, in which 25 full-scale wetlands were assessed. Where possible, data were separated seasonally to evaluate the climatic effects on treatment performance. The wastewater parameters considered were five-day biochemical oxygen demand (BOD5), total suspended solids (TSS), E. coli, fecal coliforms, total Kjeldahl nitrogen (TKN), ammonia/ammonium (NH3/NH4+-N), nitrate-nitrogen (NO3−-N), and total phosphorus (TP). Average concentration reductions were: BOD5 81%, TSS 83%, TKN 75%, NH4+-N 76%, NO3−-N 42%, and TP 64%. Average log reductions for E. coli and fecal coliforms were 1.63 and 1.93, respectively. Average first order areal rate constants (ka, m·y−1) were: BOD5 6.0 m·y−1, TSS 7.7 m·y−1, E. coli 7.0 m·y−1, fecal coliforms 9.7 m·y−1, TKN 3.1 m·y−1, NH4+-N 3.3 m·y−1, NO3−-N 2.5 m·y−1, and TP 2.9 m·y−1. In general, CWs effectively treated a variety of agricultural wastewaters, regardless of season

Laser wakefield acceleration with high-power, few-cycle mid-IR lasers

The study of laser wakefield electron acceleration (LWFA) using mid-IR laser drivers is a promising path for future laser driven electron accelerators, when compared to traditional near-IR laser drivers operating at 0.8-1 mu m central wavelength (lambda(laser)), as the necessary vector potential (a(0)) for electron injection can be achieved with smaller laser powers due to the linear dependence on lambda(laser). In this work, we perform 2D PIC simulations on LWFA using few-cycle, high power (5-15 TW) laser systems with lambda(laser) ranging from 0.88 to 10 mu m. Such fewcycle systems are currently under development, aiming at Gas High Harmonics Generation applications, where the favorable lambda(2)(laser) scaling extends the range of the XUV photon energies. We keep a(0) and n(e)/n(cr) (n(e) being the plasma density and n(cr) the critical density for each lambda(laser)) as common denominators in our simulations, allowing for comparisons between drivers with different lambda(laser), with respect to the accelerated electron beam energy, charge and conversion efficiency. While the electron energies are mainly dominated by the plasma dynamics, the laser to electron beam energy conversion efficiency shows significant enhancement with longer wavelength laser drivers. (c) 2018 Elsevier B.V. All rights reserved

Simulating the Gradually Deteriorating Performance of an RTG

Degra (now in version 3) is a computer program that simulates the performance of a radioisotope thermoelectric generator (RTG) over its lifetime. Degra is provided with a graphical user interface that is used to edit input parameters that describe the initial state of the RTG and the time-varying loads and environment to which it will be exposed. Performance is computed by modeling the flows of heat from the radioactive source and through the thermocouples, also allowing for losses, to determine the temperature drop across the thermocouples. This temperature drop is used to determine the open-circuit voltage, electrical resistance, and thermal conductance of the thermocouples. Output power can then be computed by relating the open-circuit voltage and the electrical resistance of the thermocouples to a specified time-varying load voltage. Degra accounts for the gradual deterioration of performance attributable primarily to decay of the radioactive source and secondarily to gradual deterioration of the thermoelectric material. To provide guidance to an RTG designer, given a minimum of input, Degra computes the dimensions, masses, and thermal conductances of important internal structures as well as the overall external dimensions and total mass

In Defense of Preservation

In Defense of Preservation is the transcript of a presentation at the Gotham History Festival at the CUNY Graduate Center, October 6, 2001. The discussants argued that historic preservation is vital to New York City\u27s economic and cultural health, and countered arguments that preservation was elitist and hindered the city\u27s growth. Dorothy Minor discussed the legal basis for preservation and reviewed the Penn Central decision and other court cases. Anthony C. Wood discussed the history of historic preservation in New York. And Eric W. Allison presented the intersection of preservation with the liveable cities movement