21 research outputs found

    Magnetic Fabric: Methods and Applications

    Get PDF

    Magnetostratigraphy of late neogene glacial, interglacial, and preglacial sediments in the Saskatoon and Regina areas, Saskatchewan, Canada

    Get PDF
    Sherpa Romeo green journal. Permission to archive accepted author manuscriptTwo new records of glacial stratigraphy obtained from borecores collected in southcentral Saskatchewan are compared to previously published records from Wellsch Valley and Swift Current Creek in southern Saskatchewan. The comparisons are based on magnetostratigraphy and tephrochronology, and describe preglacial, glacial, and interglacial deposits. The new stratigraphy is compared to the composite global marine oxygen isotope record. Although the ages and extents of late Pleistocene continental glaciations are relatively well constrained, they are less well defined for the middle and early Pleistocene. Data presented here highlight recent studies carried out from borecores and outcrops of extensive pre-Illinoian (pre-Saalian) glacial deposits. Based on this new data, at least seven Laurentide (continental) glaciations are recognized in Saskatchewan, and these records are the most extensive to date in the Northern Interior Plains of Canada. The magnetostratigraphic records from the Sutherland Overpass and Wascana Creek sites provide the first evidence of reversely magnetized glacial deposits in the Canadian Prairies. These deposits can be assigned to the latest Matuyama (MIS 20) and indicate that Laurentide (continental) glaciations did not impact southern Saskatchewan until the late Early Pleistocene.Ye

    Provenance and deposition of glacial Lake Missoula lacustrine and flood sediments determined from rock magnetic properties

    Get PDF
    Sherpa Romeo green journal. Permission to archive accepted author manuscript.Repeated outburst flooding from glacial LakeMissoula,Montana, affected large areas of Washington duringMarine Oxygen Isotope Stage 2 (29–14 ka).We present the first high-resolution rock magnetic results from two sites that are critical to interpreting these outburst floods and that provide evidence of sediment provenance: glacial Lake Missoula, the source of the floods; and glacial Lake Columbia, where floodwaters interrupted sedimentation. Magnetic carriers in glacial LakeMissoula varves are dominated by hematite,whereas those in outburst flood sediments and glacial Lake Columbia sediments aremainly magnetite and titano-magnetite. Stratigraphic variation of magnetic parameters is consistent with changes in lithology. Importantly, magnetic properties highlight depositional processes in the flood sediments that are not evident in the field. In glacial Lake Columbia, hematite is present in fine silt and clay deposited near the end of each flood as fine sediment settled out of the water column. This signal is only present at the end of the floods because the hematite is concentrated in the finer-grained sediment transported from the floor of glacial LakeMissoula, the only possible source of hematite, ~240 km away.Ye

    GAS HYDRATES AND MAGNETISM: COMPARATIVE GEOLOGICAL SETTINGS FOR DIAGENETIC ANALYSIS

    No full text
    Geochemical processes associated with gas hydrate formation lead to the growth of iron sulphides which have a geophysically-measurable magnetic signature. Detailed magnetic investigation, complemented by petrological observations, were undertaken on cores from a permafrost setting, the Mackenzie Delta (Canadian Northwest Territories) Mallik region, and two marine settings, IODP Expedition 311 cores from the Cascadia margin off Vancouver Island and the Indian National Gas Hydrate Program Expedition 1 from the Bengal Fan. Stratigraphic profiles of the fine scale variations in bulk magnetic measurements correspond to changes in lithology, grain size and pore fluid geochemistry which can be correlated on local to regional scales. The lowest values of magnetic susceptibility are observed where iron has been reduced to paramagnetic pyrite, formed in settings with high methane and sulphate or sulphide flux, such as at methane vents. High magnetic susceptibility values are observed in sediments which contain detrital magnetite, for example from glacial deposits, which has survived diagenesis. Other high magnetic susceptibility values are observed in sediments in which the ferrimagnetic iron-sulphide minerals greigite or smythite have been diagenetically introduced. These minerals are mostly found outside the sediments which host gas hydrate. The mineral textures and compositions indicate rapid disequilibrium crystallization. The unique physical and geochemical properties of the environments where gas hydrates form, including the availability of methane to fuel microbiological activity and the concentration of pore water solutes during gas hydrate formation, lead to iron sulphide precipitation from solute-rich brines. Magnetic surveying techniques help delineate anomalies related to gas hydrate deposits and the diagenesis of magnetic iron minerals related to their formation. Detailed core logging measurements and laboratory analyses of magnetic properties provide direct ties to original lithology, petrophysical properties and diagenesis caused by gas hydrate formation.Non UBCUnreviewe

    The Henkel Petrophysical Plot: Mineralogy and Lithology From Physical Properties

    No full text
    Abstract The Henkel plot (logarithm of magnetic susceptibility versus density of rock samples) reveals that most rocks fall on either a “magnetite trend” or a “paramagnetic trend.” Interpretation of gravity and magnetic surveys is improved when the mineralogical and lithological basis of these trends is understood. We present a quantitative mineralogical mixing model, involving the components QFC (quartz‐feldspar‐calcite), FM (ferromagnesian silicates), and M (magnetite) and discuss the geological processes which produce or modify these mixtures. Igneous rocks mostly plot on the magnetite trend, where the FM/M ratio is about 10. The density‐susceptibility mineralogical mixing model is compatible with the CIPW mineral calculation for igneous classification from chemical analyses. Sedimentary and metamorphic processes usually involve oxidation, reduction, and/or iron loss, all which are magnetite‐destructive and lead to petrophysical measurements along the paramagnetic trend where FM/M > 1,000. Mineralization, with the introduction of sulfides and oxides, leads to dense rocks which do not plot along the magnetite nor paramagnetic trends. This quantitative analysis provides a method to integrate geological processes in the interpretation of geophysical surveys

    A Cretaceous pole from south China, and the Mesozoic hairpin turn of the Eurasian apparent polar wander path

    No full text
    International audienceTo contribute to the apparent polar wander path (APWP) of the South China Block and Eurasia in general, we collected paleomagnetic samples from Mesozoic red beds around the city of Ya' an (30°N, 103°E) in the western tip of the Sichuan Basin. In this paper we present the results from 373 oriented cores taken from one section representing 3 km of sedimentary rocks. The section is dated with continental ostracods and with a magnetostratigraphic correlation between a densely sampled 272-m sequence and the polarity time scale, giving an upper Jurassic to Upper Cretaceous or Lower Tertiary age. The remanent direction is remarkably stable throughout the section (D=2.0°, I=34.2°, k=63.1,α95=3.6°, N=26/28 sites). While this fact might suggest that the section has been remagnetized, paleomagnetic and rock magnetic tests indicate that the remanence is primary. The pole position (78.6°N, 273.4°E, dp=2.4°, dm=4.1°) corresponds to a rather low paleolatitude (λ=18.8°±2.4°) but is consistent with other Cretaceous poles from China. If one accepts the Eurasian APWP of Irving and Irving (1982), this result would imply that more than 1000 km of shortening took place between South China and Eurasia, following the acquisition of the remanence. However, there is no geological evidence for this large shortening. We propose that the remanence was acquired within the time corresponding to the tip of the hairpin turn (∌150–50 Ma) in the revised APWP of Besse and Courtillot (this issue). The local geology suggests that the syncline from which the samples were taken has been rotated by 15°±5° counterclockwise, which is reflected in a similar discrepancy between the measured paleodeclination and that predicted by the Besse and Courtillot (this issue) Eurasian APWP. After correcting for this rotation, the pole position is 70.9°N, 225.2°E (dp=2.4°, dm=6.5°). We conclude that Eurasia was fully assembled by the end of the Jurassic and that the Mesozoic Eurasian hairpin turn is a real feature

    How turbidity current frequency and character varies down a fjord-delta system: Combining direct monitoring, deposits and seismic data

    Get PDF
    Submarine turbidity currents are one of the most important processes for moving sediment across our planet; they are hazardous to offshore infrastructure, deposit petroleum reservoirs worldwide, and may record tsunamigenic landslides. However, there are few studies that have monitored these submarine flows in action, and even fewer studies that have combined direct monitoring with longer‐term records from core and seismic data of deposits. This article provides one of the most complete studies yet of a turbidity current system. The aim here is to understand what controls changes in flow frequency and character along the turbidite system. The study area is a 12 km long delta‐fed fjord (Howe Sound) in British Columbia, Canada. Over 100 often powerful (up to 2 to 3 m sec−1) events occur each year in the highly‐active proximal channels, which extend for 1 to 2 km from the delta lip. About half of these events reach the lobes at the channel mouths. However, flow frequency decreases rapidly once these initially sand‐rich flows become unconfined, and only one to five flows run out across the mid‐slope each year. Many of these sand‐rich, channelized, delta‐sourced flows therefore dissipated over a few hundred metres, once unconfined, rather than eroding and igniting. Upflow migrating bedforms indicate that supercritical flow dominated in the proximal channels and lobes, and also across the unconfined mid‐slope. These supercritical flows deposited thick sand beds in proximal channels and lobes, but thinner and finer beds on the unconfined mid‐slope. The distal flat basin records far larger volume and more hazardous events that have a recurrence interval of ca 100 years. This study shows how sand‐rich delta‐fed flows dissipate rapidly once they become unconfined, that supercritical flows dominate in both confined and unconfined settings, and how a second type of more hazardous, and much less frequent event is linked to a different scale of margin failure

    Slipstream: an early Holocene slump and turbidite record from the frontal ridge of the Cascadia accretionary wedge off western Canada and paleoseismic implications

    No full text
    Slipstream Slump, a well-preserved 3 km wide sedimentary failure from the frontal ridge of the Cascadia accretionary wedge 85 km off Vancouver Island, Canada, was sampled during Canadian Coast Guard Ship (CCGS) John P. Tully cruise 2008007PGC along a transect of five piston cores. Shipboard sediment analysis and physical property logging revealed 12 turbidites interbedded with thick hemipelagic sediments overlying the slumped glacial diamict. Despite the different sedimentary setting, atop the abyssal plain fan, this record is similar in number and age to the sequence of turbidites sampled farther to the south from channel systems along the Cascadia Subduction Zone, with no extra turbidites present in this local record. Given the regional physiographic and tectonic setting, megathrust earthquake shaking is the most likely trigger for both the initial slumping and subsequent turbidity currents, with sediments sourced exclusively from the exposed slump face of the frontal ridge. Planktonic foraminifera picked from the resedimented diamict of the underlying main slump have a disordered cluster of 14C ages between 12.8 and 14.5 ka BP. For the post-slump stratigraphy, an event-free depth scale is defined by removing the turbidite sediment intervals and using the hemipelagic sediments. Nine 14C dates from the most foraminifera-rich intervals define a nearly constant hemipelagic sedimentation rate of 0.021 cm/year. The combined age model is defined using only planktonic foraminiferal dates and Bayesian analysis with a Poisson-process sedimentation model. The age model of ongoing hemipelagic sedimentation is strengthened by physical property correlations from Slipstream events to the turbidites for the Barkley Canyon site 40 km south. Additional modelling addressed the possibilities of seabed erosion or loss and basal erosion beneath turbidites. Neither of these approaches achieves a modern seabed age when applying the commonly used regional marine 14C reservoir age of 800 years (marine reservoir correction ΔR = 400 years). Rather, the top of the core appears to be 400 years in the future. A younger marine reservoir age of 400 years (ΔR = 0 years) brings the top to the present and produces better correlations with the nearby Effingham Inlet paleo-earthquake chronology based only on terrestrial carbon requiring no reservoir correction. The high-resolution dating and facies analysis of Slipstream Slump in this isolated slope basin setting demonstrates that this is also a useful type of sedimentary target for sampling the paleoseismic record in addition to the more studied turbidites from submarine canyon and channel systems. The first 10 turbidites at Slipstream Slump were deposited between 10.8 and 6.6 ka BP, after which the system became sediment starved and only two more turbidites were deposited. The recurrence interval for the inferred frequent early Holocene megathrust earthquakes is 460 ± 140 years, compatible with other estimates of paleoseismic megathrust earthquake occurrence rates along the subduction zone
    corecore