A Mid-Infrared Galaxy Atlas (MIGA)

A mid-infrared atlas of part of the Galactic plane ($75^\circ < l < 148^\circ, b = \pm6^\circ$) has been constructed using HIRES processed infrared data to provide a mid-infrared data set for the Canadian Galactic Plane Survey (CGPS). The addition of this data set to the CGPS will enable the study of the emission from the smallest components of interstellar dust at an angular resolution comparable to that of the radio, millimetre, and far-infrared data in the CGPS. The Mid-Infrared Galaxy Atlas (MIGA) is a mid-infrared (12 $\mu$m and 25 $\mu$m) counterpart to the far-infrared IRAS Galaxy Atlas (IGA), and consists of resolution enhanced ($\sim 0.5'$ resolution) HIRES images along with ancillary maps. This paper describes the processing and characteristics of the atlas, the cross-beam simulation technique used to obtain high-resolution ratio maps, and future plans to extend both the IGA and MIGA.Comment: 38 pages (including 15 tables), 13 figures (8 dithered GIF and 5 EPS). Submitted to Astrophysical Journal Supplement Series. A preprint with higher resolution figures is available at http://www.cita.utoronto.ca/~kerton/publications.htm

Patient-oriented and performance-based outcomes after knee autologous chondrocyte implantation: a timeline for the first year of recovery

It is well established that autologous chondrocyte implantation (ACI) can require extended recovery postoperatively; however, little information exists to provide clinicians and patients with a timeline for anticipated function during the first year after ACI. Objective: To document the recovery of functional performance of activities of daily living after ACI. Patients: ACI patients (n = 48, 29 male 35.1 ± 8.0 y). Intervention: All patients completed functional tests (weight-bearing squat, walk-across, sit-to-stand, step-up/over, and forward lunge) using the NeuroCom long force plate (Clackamas, OR) and completed patient-reported outcome measures (International Knee Documentation Committee Subjective Knee Evaluation Form, Lysholm, Western Ontario and McMaster Osteoarthritis Index WOMAC, and 36-Item Short-Form Health Survey) preoperatively and 3, 6, and 12 mo postoperatively. Main Outcome Measures: A covariance pattern model was used to compare performance and self-reported outcome across time and provide a timeline for functional recovery after ACI. Results: Participants demonstrated significant improvement in walk-across stride length from baseline (42.0% ± 8.9% height) at 6 (46.8% ± 8.1%) and 12 mo (46.6% ± 7.6%). Weight bearing on the involved limb during squatting at 30°, 60°, and 90° was significantly less at 3 mo than presurgery. Step-up/over time was significantly slower at 3 mo (1.67 ± 0.69 s) than at baseline (1.49 ± 0.33 s), 6 mo (1.51 ± 0.36 s), and 12 mo (1.40 ± 0.26 s). Step-up/over lift-up index was increased from baseline (41.0% ± 11.3% body weight BW) at 3 (45.0% ± 11.7% BW), 6 (47.0% ± 11.3% BW), and 12 mo (47.3% ± 11.6% BW). Forward-lunge time was decreased at 3 mo (1.51 ± 0.44 s) compared with baseline (1.39 ± 0.43 s), 6 mo (1.32 ± 0.05 s), and 12 mo (1.27 ± 0.06). Similarly, forward-lunge impact force was decreased at 3 mo (22.2% ± 1.4% BW) compared with baseline (25.4% ± 1.5% BW). The WOMAC demonstrated significant improvements at 3 mo. All patient-reported outcomes were improved from baseline at 6 and 12 mo postsurgery. Conclusions: Patients' perceptions of improvements may outpace physical changes in function. Decreased function for at least the first 3 mo after ACI should be anticipated, and improvement in performance of tasks requiring weight-bearing knee flexion, such as squatting, going down stairs, or lunging, may not occur for a year or more after surgery

Forecast of future aviation fuels: The model

A conceptual models of the commercial air transportation industry is developed which can be used to predict trends in economics, demand, and consumption. The methodology is based on digraph theory, which considers the interaction of variables and propagation of changes. Air transportation economics are treated by examination of major variables, their relationships, historic trends, and calculation of regression coefficients. A description of the modeling technique and a compilation of historic airline industry statistics used to determine interaction coefficients are included. Results of model validations show negligible difference between actual and projected values over the twenty-eight year period of 1959 to 1976. A limited application of the method presents forecasts of air tranportation industry demand, growth, revenue, costs, and fuel consumption to 2020 for two scenarios of future economic growth and energy consumption

Dimpling process in cold roll metal forming by finite element modelling and experimental validation

The dimpling process is a novel cold-roll forming process that involves dimpling of a rolled flat strip prior to the roll forming operation. This is a process undertaken to enhance the material properties and subsequent products’ structural performance while maintaining a minimum strip thickness. In order to understand the complex and interrelated nonlinear changes in contact, geometry and material properties that occur in the process, it is necessary to accurately simulate the process and validate through physical tests. In this paper, 3D non-linear finite element analysis was employed to simulate the dimpling process and mechanical testing of the subsequent dimpled sheets, in which the dimple geometry and material properties data were directly transferred from the dimpling process. Physical measurements, tensile and bending tests on dimpled sheet steel were conducted to evaluate the simulation results. Simulation of the dimpling process identified the amount of non-uniform plastic strain introduced and the manner in which this was distributed through the sheet. The plastic strain resulted in strain hardening which could correlate to the increase in the strength of the dimpled steel when compared to plain steel originating from the same coil material. A parametric study revealed that the amount of plastic strain depends upon on the process parameters such as friction and overlapping gap between the two forming rolls. The results derived from simulations of the tensile and bending tests were in good agreement with the experimental ones. The validation indicates that the finite element analysis was able to successfully simulate the dimpling process and mechanical properties of the subsequent dimpled steel products

Point-of-care measurement of blood lactate in children admitted with febrile illness to an African District Hospital.

BACKGROUND: Lactic acidosis is a consistent predictor of mortality owing to severe infectious disease, but its detection in low-income settings is limited to the clinical sign of "deep breathing" because of the lack of accessible technology for its measurement. We evaluated the use of a point-of-care (POC) diagnostic device for blood lactate measurement to assess the severity of illness in children admitted to a district hospital in Tanzania. METHODS: Children between the ages of 2 months and 13 years with a history of fever were enrolled in the study during a period of 1 year. A full clinical history and examination were undertaken, and blood was collected for culture, microscopy, complete blood cell count, and POC measurement of blood lactate and glucose. RESULTS: The study included 3248 children, of whom 164 (5.0%) died; 45 (27.4%) of these had raised levels of blood lactate (>5 mmol/L) but no deep breathing. Compared with mortality in children with lactate levels of ≤ 3 mmol/L, the unadjusted odds of dying were 1.6 (95% confidence interval [CI].8-3.0), 3.4 (95% CI, 1.5-7.5), and 8.9 (95% CI, 4.7-16.8) in children with blood lactate levels of 3.1-5.0, 5.1-8.0, or >8.0 mmol/L, respectively. The prevalence of raised lactate levels (>5 mmol/L) was greater in children with malaria than in children with nonmalarial febrile illness (P < .001) although the associated mortality was greater in slide-negative children. CONCLUSIONS: POC lactate measurement can contribute to the assessment of children admitted to hospital with febrile illness and can also create an opportunity for more hospitals in resource-poor settings to participate in clinical trials of interventions to reduce mortality associated with hyperlactatemia

Rings and Jets around PSR J2021+3651: the `Dragonfly Nebula'

We describe recent Chandra ACIS observations of the Vela-like pulsar PSR J2021+3651 and its pulsar wind nebula (PWN). This `Dragonfly Nebula' displays an axisymmetric morphology, with bright inner jets, a double-ridged inner nebula, and a ~30" polar jet. The PWN is embedded in faint diffuse emission: a bow shock-like structure with standoff ~1' brackets the pulsar to the east and emission trails off westward for 3-4'. Thermal (kT=0.16 +/-0.02 keV) and power law emission are detected from the pulsar. The nebular X-rays show spectral steepening from Gamma=1.5 in the equatorial torus to Gamma=1.9 in the outer nebula, suggesting synchrotron burn-off. A fit to the `Dragonfly' structure suggests a large (86 +/-1 degree) inclination with a double equatorial torus. Vela is currently the only other PWN showing such double structure. The >12 kpc distance implied by the pulsar dispersion measure is not supported by the X-ray data; spectral, scale and efficiency arguments suggest a more modest 3-4 kpc.Comment: 22 pages, 5 figures, 3 tables, Accepted to Ap

Hypervelocity impact testing of cables

The physics and electrical results obtained from simulated micrometeoroid testing of certain Skylab cables are presented. The test procedure, electrical circuits, test equipment, and cable types utilized are also explained

Optical Response of Grating-Coupler-Induced Intersubband Resonances: The Role of Wood's Anomalies

Grating-coupler-induced collective intersubband transitions in a quasi-two-dimensional electron system are investigated both experimentally and theoretically. Far-infrared transmission experiments are performed on samples containing a quasi-two-dimensional electron gas quantum-confined in a parabolic quantum well. For rectangular shaped grating couplers of different periods we observe a strong dependence of the transmission line shape and peak height on the period of the grating, i.e. on the wave vector transfer from the diffracted beams to the collective intersubband resonance. It is shown that the line shape transforms with increasing grating period from a Lorentzian into a strongly asymmetric line shape. Theoretically, we treat the problem by using the transfer-matrix method of local optics and apply the modal-expansion method to calculate the influence of the grating. The optically uniaxial quasi-two-dimensional electron gas is described in the long-wavelength limit of the random-phase approximation by a local dielectric tensor, which includes size quantization effects. Our theory reproduces excellently the experimental line shapes. The deformation of the transmission line shapes we explain by the occurrence of both types of Wood's anomalies.Comment: 28 pages, 7 figures. Physical Review B , in pres

Establishment of leucaena in Australia

Leucaena (Leucaena leucocephala ssp. glabrata) is a highly productive tropical perennial legume used primarily in extensive beef grazing systems across northern Australia. Its productivity provides substantial benefits to grazing businesses and economically significant areas of leucaena have been established in Queensland, with much smaller areas in both the Northern Territory and Western Australia. Specific environmental conditions (particularly soil type) and management practices are required to obtain reliable establishment and high productivity from leucaena-grass grazing systems. Significant research, development and extension have been undertaken in northern Australia, particularly in central Queensland, resulting in management packages which ensure establishment reliability and long-term productivity. However expansion into new areas can be constrained by regionally-specific establishment issues. Adaptation of known establishment and management practices together with research and development are required for leucaena-grass grazing systems in new regions