Geant4 Monte Carlo simulation study of the secondary radiation fields at the laser-driven ion source LION

At the Center for Advanced Laser Applications (CALA), Garching, Germany, the LION (Laser-driven ION Acceleration) experiment is being commissioned, aiming at the production of laser-driven bunches of protons and light ions with multi-MeV energies and repetition frequency up to 1 Hz. A Geant4 Monte Carlo-based study of the secondary neutron and photon fields expected during LION’s different commissioning phases is presented. Goal of this study is the characterization of the secondary radiation environment present inside and outside the LION cave. Three different primary proton spectra, taken from experimental results reported in the literature and representative of three different future stages of the LION’s commissioning path are used. Together with protons, also electrons are emitted through laser-target interaction and are also responsible for the production of secondary radiation. For the electron component of the three source terms, a simplified exponential model is used. Moreover, in order to reduce the simulation complexity, a two-components simplified geometrical model of proton and electron sources is proposed. It has been found that the radiation environment inside the experimental cave is either dominated by photons or neutrons depending on the position in the room and the source term used. The higher the intensity of the source, the higher the neutron contribution to the total dose for all scored positions. Maximum neutron and photon ambient dose equivalent values normalized to 10(9) simulated incident primaries were calculated at the exit of the vacuum chamber, where values of about 85 nSv (10(9) primaries)(−1) and 1.0 μSv (10(9) primaries)(−1) were found

I would never take preventive medication! Perspectives and information needs of people who underwent predictive tests for rheumatoid arthritis

Objective: Little is known about the experiences, values and needs of people without arthritis who undergo predictive biomarker testing for the development of rheumatoid arthritis (RA). Our study aimed to explore the perspectives of these individuals and describe their information needs. Methods: A qualitative, multicenter interview study with a thematic analysis was conducted in Austria, Germany and the UK. Individuals who underwent predictive biomarker testing for RA and had a positive test result, but no diagnosis of any inflammatory joint disease, were interviewed. Participants included patients with arthralgia and asymptomatic individuals. Information and education needs were developed from the qualitative codes and themes using the Arthritis Educational Needs Assessment Tool (ENAT) as a frame of reference. Results: Thematic saturation was reached in 34 individuals (76% female; 24 [71%] with arthralgia and 10 [29%] asymptomatic individuals). Thirty‐seven codes were summarized into four themes, namely (i) decision making around whether to undergo initial predictive testing, (ii) willingness to consider further predictive tests and/or (iii) preventive interventions, including medication and (iv) varying reactions after receiving a positive test result. Individuals with arthralgia were more likely to be willing to take preventive action, undergo further testing, and experience psychological distress than asymptomatic individuals. All participants expressed the need for tailored, lay‐understandable information. Conclusion: Individuals at risk of RA are currently the subjects of research aimed at developing better predictive strategies and preventive approaches. Their perceptions and needs should be addressed to inform the future development of interventions combined with education

A novel approach to electron data background treatment in an online wide-angle spectrometer for laser-accelerated ion and electron bunches

Laser-based ion acceleration is driven by electrical fields emerging when target electrons absorb laser energy and consecutively leave the target material. A direct correlation between these electrons and the accelerated ions is thus to be expected and predicted by theoretical models. We report on a modified wide-angle spectrometer allowing the simultaneous characterization of angularly resolved energy distributions of both ions and electrons. Equipped with online pixel detectors, the RadEye1 detectors, the investigation of this correlation gets attainable on a single shot basis. In addition to first insights, we present a novel approach for reliably extracting the primary electron energy distribution from the interfering secondary radiation background. This proves vitally important for quantitative extraction of average electron energies (temperatures) and emitted total charge

I-BEAT: New ultrasonic method for single bunch measurement of ion energy distribution

The shape of a wave carries all information about the spatial and temporal structure of its source, given that the medium and its properties are known. Most modern imaging methods seek to utilize this nature of waves originating from Huygens' principle. We discuss the retrieval of the complete kinetic energy distribution from the acoustic trace that is recorded when a short ion bunch deposits its energy in water. This novel method, which we refer to as Ion-Bunch Energy Acoustic Tracing (I-BEAT), is a generalization of the ionoacoustic approach. Featuring compactness, simple operation, indestructibility and high dynamic ranges in energy and intensity, I-BEAT is a promising approach to meet the needs of petawatt-class laser-based ion accelerators. With its capability of completely monitoring a single, focused proton bunch with prompt readout it, is expected to have particular impact for experiments and applications using ultrashort ion bunches in high flux regimes. We demonstrate its functionality using it with two laser-driven ion sources for quantitative determination of the kinetic energy distribution of single, focused proton bunches.Comment: Paper: 17 Pages, 3 figures Supplementary Material 16 pages, 7 figure

Laser-driven x-ray and proton micro-source and application to simultaneous single-shot bi-modal radiographic imaging

Radiographic imaging with x-rays and protons is an omnipresent tool in basic research and applications in industry, material science and medical diagnostics. The information contained in both modalities can often be valuable in principle, but difficult to access simultaneously. Laser-driven solid-density plasma-sources deliver both kinds of radiation, but mostly single modalities have been explored for applications. Their potential for bi-modal radiographic imaging has never been fully realized, due to problems in generating appropriate sources and separating image modalities. Here, we report on the generation of proton and x-ray micro-sources in laser-plasma interactions of the focused Texas Petawatt laser with solid-density, micrometer-sized tungsten needles. We apply them for bi-modal radiographic imaging of biological and technological objects in a single laser shot. Thereby, advantages of laser-driven sources could be enriched beyond their small footprint by embracing their additional unique properties, including the spectral bandwidth, small source size and multi-mode emission. Here the authors show a synchronized single-shot bi-modal x-ray and proton source based on laser-generated plasma. This source can be useful for radiographic and tomographic imaging

An automated, 0.5Hz nano-foil target positioning system for intense laser plasma experiments

We report on a target system supporting automated positioning of nano-targets with a precision resolution of in three dimensions. It relies on a confocal distance sensor and a microscope. The system has been commissioned to position nanometer targets with 1Hz repetition rate. Integrating our prototype into the table-top ATLAS 300 TW-laser system at the Laboratory for Extreme Photonics in Garching, we demonstrate the operation of a 0.5Hz laser-driven proton source with a shot-to-shot variation of the maximum energy about 27% for a level of confidence of 0.95. The reason of laser shooting experiments operated at 0.5Hz rather than 1Hz is because the synchronization between the nano-foil target positioning system and the laser trigger needs to improve.DFG Cluster of Excellence Munich-Centre for Advanced Photonics (MAP); Centre for Advanced Laser Applications; China Scholarship [201508080084]SCI(E)ARTICLE

Factors and Situations Affecting the Value of Patient Preference Studies: Semi-Structured Interviews in Europe and the US

Objectives: Patient preference information (PPI) is gaining recognition among the pharmaceutical industry, regulatory authorities, and health technology assessment (HTA) bodies/payers for use in assessments and decision-making along the medical product lifecycle (MPLC). This study aimed to identify factors and situations that influence the value of patient preference studies (PPS) in decision-making along the MPLC according to different stakeholders. Methods: Semi-structured interviews (n = 143) were conducted with six different stakeholder groups (physicians, academics, industry representa

Patient Preferences in the Medical Product Life Cycle: What do Stakeholders Think? Semi-Structured Qualitative Interviews in Europe and the USA.

Background Patient preferences (PP), which are investigated in PP studies using qualitative or quantitative methods, are a growing area of interest to the following stakeholders involved in the medical product lifecycle: academics, health technology assessment bodies,