265 research outputs found
Exotic magnetism in the alkali sesquoxides Rb4O6 and Cs4O6
Among the various alkali oxides the sesquioxides Rb4O6 and Cs4O6 are of
special interest. Electronic structure calculations using the local
spin-density approximation predicted that Rb4O6 should be a half-metallic
ferromagnet, which was later contradicted when an experimental investigation of
the temperature dependent magnetization of Rb4O6 showed a low-temperature
magnetic transition and differences between zero-field-cooled (ZFC) and
field-cooled (FC) measurements. Such behavior is known from spin glasses and
frustrated systems. Rb4O6 and Cs4O6 comprise two different types of dioxygen
anions, the hyperoxide and the peroxide anions. The nonmagnetic peroxide anions
do not contain unpaired electrons while the hyperoxide anions contain unpaired
electrons in antibonding pi*-orbitals. High electron localization (narrow
bands) suggests that electronic correlations are of major importance in these
open shell p-electron systems. Correlations and charge ordering due to the
mixed valency render p-electron-based anionogenic magnetic order possible in
the sesquioxides. In this work we present an experimental comparison of Rb4O6
and the related Cs4O6. The crystal structures are verified using powder x-ray
diffraction. The mixed valency of both compounds is confirmed using Raman
spectroscopy, and time-dependent magnetization experiments indicate that both
compounds show magnetic frustration, a feature only previously known from d-
and f-electron systems
Future Directions in the Molecular Breeding of Forage and Turf
Key points Molecular breeding of forage and turf plants and their endosymbionts has entered the post-genomic era with a large amount of structural genomics information and genomic resources available for key forage and turf species and relevant model systems. A primary future challenge is the conversion of this information into useful functional knowledge for the development of molecular breeding technologies and products that address a range of high impact outcome scenarios in forage and turf. High-throughput approaches for spatial and temporal analysis, from genome to phenome, and the respective data integration in a systems biology context will be critical for the establishment of stringent gene-function correlations. Translational genomics will permit results obtained using model systems to have major impact on the understanding of the molecular basis of plant processes and direct application to the molecular breeding of forage and turf plants. These developments will be enhanced through applications of transgenesis and functionally-associated genetic markers in forage and turf molecular breeding building on genomic and post-genomic discoveries in these target species
New damage curves and multimodel analysis suggest lower optimal temperature
Economic analyses of global climate change have been criticized for their poor representation of climate change damages. Here we develop and apply aggregate damage functions in three economic Integrated Assessment Models (IAMs) with different degrees of complexity. The damage functions encompass a wide but still incomplete set of climate change impacts based on physical impact models. We show that with medium estimates for damage functions, global damages are in the range of 10% to 12% of GDP by 2100 in a baseline scenario with 3 °C temperature change, and about 2% in a well-below 2 °C scenario. These damages are much higher than previous estimates in benefit-cost studies, resulting in optimal temperatures below 2 °C with central estimates of damages and discount rates. Moreover, we find a benefit-cost ratio of 1.5 to 3.9, even without considering damages that could not be accounted for, such as biodiversity losses, health and tipping points
Atomic-scale confinement of optical fields
In the presence of matter there is no fundamental limit preventing
confinement of visible light even down to atomic scales. Achieving such
confinement and the corresponding intensity enhancement inevitably requires
simultaneous control over atomic-scale details of material structures and over
the optical modes that such structures support. By means of self-assembly we
have obtained side-by-side aligned gold nanorod dimers with robust
atomically-defined gaps reaching below 0.5 nm. The existence of
atomically-confined light fields in these gaps is demonstrated by observing
extreme Coulomb splitting of corresponding symmetric and anti-symmetric dimer
eigenmodes of more than 800 meV in white-light scattering experiments. Our
results open new perspectives for atomically-resolved spectroscopic imaging,
deeply nonlinear optics, ultra-sensing, cavity optomechanics as well as for the
realization of novel quantum-optical devices
Age-related changes in global motion coherence: conflicting haemodynamic and perceptual responses
Our aim was to use both behavioural and neuroimaging data to identify indicators of perceptual decline in motion processing. We employed a global motion coherence task and functional Near Infrared Spectroscopy (fNIRS). Healthy adults (n = 72, 18-85) were recruited into the following groups: young (n = 28, mean age = 28), middle-aged (n = 22, mean age = 50), and older adults (n = 23, mean age = 70). Participants were assessed on their motion coherence thresholds at 3 different speeds using a psychophysical design. As expected, we report age group differences in motion processing as demonstrated by higher motion coherence thresholds in older adults. Crucially, we add correlational data showing that global motion perception declines linearly as a function of age. The associated fNIRS recordings provide a clear physiological correlate of global motion perception. The crux of this study lies in the robust linear correlation between age and haemodynamic response for both measures of oxygenation. We hypothesise that there is an increase in neural recruitment, necessitating an increase in metabolic need and blood flow, which presents as a higher oxygenated haemoglobin response. We report age-related changes in motion perception with poorer behavioural performance (high motion coherence thresholds) associated with an increased haemodynamic response
The shared socioeconomic pathways and their energy, land use, and greenhouse gas emissions implications: An overview
This paper presents the overview of the Shared Socioeconomic Pathways (SSPs) and their energy, land use, and emissions implications. The SSPs are part of a new scenario framework, established by the climate change research community in order to facilitate the integrated analysis of future climate impacts, vulnerabilities, adaptation, and mitigation. The pathways were developed over the last years as a joint community effort and describe plausible major global developments that together would lead in the future to different challenges for mitigation and adaptation to climate change. The SSPs are based on five narratives describing alternative socio-economic developments, including sustainable development, regional rivalry, inequality, fossil-fueled development, and a middle-of-the-road development. The long-term demographic and economic projections of the SSPs depict a wide uncertainty range consistent with the scenario literature. A multi-model approach was used for the elaboration of the energy, land-use and the emissions trajectories of SSP-based scenarios. The baseline scenarios lead to global energy consumption of 500-1100 EJ in 2100, and feature vastly different land-use dynamics, ranging from a possible reduction in cropland area up to a massive expansion by more than 700 million hectares by 2100. The associated annual CO2 emissions of the baseline scenarios range from about 25 GtCO2 to more than 120 GtCO2 per year by 2100. With respect to mitigation, we find that associated costs strongly depend on three factors: 1) the policy assumptions, 2) the socio-economic narrative, and 3) the stringency of the target. The carbon price for reaching the target of 2.6 W/m2 differs in our analysis thus by about a factor of three across the SSP scenarios. Moreover, many models could not reach this target from the SSPs with high mitigation challenges. While the SSPs were designed to represent different mitigation and adaptation challenges, the resulting narratives and quantifications span a wide range of different futures broadly representative of the current literature. This allows their subsequent use and development in new assessments and research projects. Critical next steps for the community scenario process will, among others, involve regional and sectorial extensions, further elaboration of the adaptation and impacts dimension, as well as employing the SSP scenarios with the new generation of earth system models as part of the 6th climate model intercomparison project (CMIP6)
A Process for Assessing NASA's Capability in Aircraft Noise Prediction Technology
An acoustic assessment is being conducted by NASA that has been designed to assess the current state of the art in NASA s capability to predict aircraft related noise and to establish baselines for gauging future progress in the field. The process for determining NASA s current capabilities includes quantifying the differences between noise predictions and measurements of noise from experimental tests. The computed noise predictions are being obtained from semi-empirical, analytical, statistical, and numerical codes. In addition, errors and uncertainties are being identified and quantified both in the predictions and in the measured data to further enhance the credibility of the assessment. The content of this paper contains preliminary results, since the assessment project has not been fully completed, based on the contributions of many researchers and shows a select sample of the types of results obtained regarding the prediction of aircraft noise at both the system and component levels. The system level results are for engines and aircraft. The component level results are for fan broadband noise, for jet noise from a variety of nozzles, and for airframe noise from flaps and landing gear parts. There are also sample results for sound attenuation in lined ducts with flow and the behavior of acoustic lining in ducts
Precision of genetic parameters and breeding values estimated in marker assisted BLUP genetic evaluation
In practical implementations of marker-assisted selection economic and logistic restrictions frequently lead to incomplete genotypic data for the animals of interest. This may result in bias and larger standard errors of the estimated parameters and, as a consequence, reduce the benefits of applying marker-assisted selection. Our study examines the impact of the following factors: phenotypic information, depth of pedigree, and missing genotypes in the application of marker-assisted selection. Stochastic simulations were conducted to generate a typical dairy cattle population. Genetic parameters and breeding values were estimated using a two-step approach. First, pre-corrected phenotypes (daughter yield deviations (DYD) for bulls, yield deviations (YD) for cows) were calculated in polygenic animal models for the entire population. These estimated phenotypes were then used in marker assisted BLUP (MA-BLUP) evaluations where only the genotyped animals and their close relatives were included
Morphology and photoluminescence study of titania nanoparticles
Titania nanoparticles are prepared by sol–gel chemistry with a poly(ethylene oxide) methyl ether methacrylate-block-poly(dimethylsiloxane)-block-poly(ethylene oxide) methyl ether methacrylate triblock copolymer acting as the templating agent. The sol–gel components—hydrochloric acid, titanium tetraisopropoxide, and triblock copolymer—are varied to investigate their effect on the resulting titania morphology. An increased titania precursor or polymer content yields smaller primary titania structures. Microbeam grazing incidence small-angle X-ray scattering measurements, which are analyzed with a unified fit model, reveal information about the titania structure sizes. These small structures could not be observed via the used microscopy techniques. The interplay among the sol–gel components via our triblock copolymer results in different sized titania nanoparticles with higher packing densities. Smaller sized titania particles, (∼13–20 nm in diameter) in the range of exciton diffusion length, are formed by 2% by weight polymer and show good crystallinity with less surface defects and high oxygen vacancies
- …