42 research outputs found
Current-source single-phase module integrated inverters for PV grid-connected applications
This paper presents a modular grid-connected single-phase system based on series-connected current-source module integrated converters (MICs). The modular configuration improves the reliability, redundancy and scalability of photovoltaic (PV) distributed generators. In this system, each PV panel is connected to a dc/ac inverter to permit individual Maximum Power Point Tracking (MPPT) operation for each panel. Thus, the harvested power from the PV system will increase significantly. There are four different inverter topologies suitable to be used as MICs with different performances in terms of filtering elements size, power losses, efficiency, output voltage range, and high frequency transformers’ size. For the MPPT control, the oscillating even order harmonic components should be eliminated from the inverter’s input side otherwise the maximum power cannot be extracted. The proposed modulation scheme in this paper will ease the control of inverter’s input and output sides. Therefore, the 2nd order harmonic in the input current can be eliminated without adding new active semiconductor switches. A repetitive controller coupled with proportional-resonant controllers are employed to achieve accurate tracking for grid side as well as input side currents. Comparisons and performance evaluations for the proposed MICs are presented and validated with 1 kVA prototype controlled by TMS320F29335 DSP
Electroporation for water disinfection: a proof of concept experimentation
This paper is a proof of concept showing the effectiveness of using irreversible electroporation (IRE) as a stage of water disinfection in the water treatment process. The IRE process essentially requires relatively high voltage pulses to pose a pulsed electric field across harmful microorganisms. In this paper, a laboratory-based solid-state Marx generator was built for this purpose and untreated water samples have been used to test the effectiveness of applying variable pulse width, magnitude and rate. All the pulses are unipolar rectangular. The tested samples are all from the same water source with the same coliform count. After performing the electroporation disinfection process the coliform count reached zero proving the effectiveness of IRE
A modular multilevel based high-voltage pulse generator for water disinfection applications
The role of irreversible electroporation using pulsed electric field (PEF) is to generate high voltage (HV) pulses with a predefined magnitude and duration. These HV pulses are applied to the treatment chamber until decontamination of the sample is completed. In this paper, a new topology for HV rectangular pulse generation for water disinfection applications is introduced. The proposed topology has four arms comprised of series connected half H-bridge modular multilevel converter cells. The rectangular pulse characteristics can be controlled via a software controller without any physical changes in power topology. The converter is capable of generating both bipolar and monopolar HV pulses with micro-second pulse durations at a high frequency rate with different characteristics. Hence, the proposed topology provides flexibility by software control, along with hardware modularity, scalability, and redundancy. Moreover, a cell's capacitance is relatively small which drastically reduces the converter footprint. The adopted charging and discharging process of the cell capacitors in this topology eliminate the need of any voltage measurements or complex control for cell-capacitors voltage balance. Consequently, continuity of converter operation is assured under cell malfunction. In this paper, analysis and cell-capacitor sizing of the proposed topology are detailed. Converter operation is verified using MATLAB/Simulink simulation and scaled experimentation
Cancer treatment: an overview of pulsed electric field utilization and generation
Patients diagnosed with cancer receive different types of treatments based on the type and the level of the tumour. An emerging treatment that differs from well-developed systematic therapies (i.e., Chemotherapy, Radiotherapy, and Immunotherapy) is Tumour Treating Field (TTF) treatment. Tumour behaviour under TTF treatment varies based on the electric field intensity; the process of exposing the tumour cells to an electric field is called electroporation. From the electrical perspective, the most efficient method for electroporation is to use a voltage pulse generator. Several pulse generator topologies have been introduced to overcome existing limitations, mitigate the drawbacks of classical generators, and provide more controllable, flexible, and portable solid-state voltage pulse generators. This paper provides a review of cancer treatment using TTF and highlights the key specifications required for efficient treatment. Additionally, potential voltage pulse generators are reviewed and compared in terms of their treatment efficacy and efficient use of electrical power
A new DC-DC converter linking LCC-HVDC transmission networks
Transferring bulk power via high voltage direct current (HVDC) transmission is dominated by line commutated converters (LCC). This is due to the robustness and higher ratings of the thyristors as well as the higher converter efficiency. Nevertheless, most of these transmission networks are point to point. This is due to the challenges of allowing multi-terminal LCC based networks and power reversal. This paper introduces a new dc-dc converter topology that allows connecting two independent LCC networks. The proposed converter is based on insulated gate commutated thyristors (IGCTs). Utilizing IGCTs allow mimicking similar control and performance as in insulated gate bipolar transistor (IGBT) based voltage source dc-dc converters. However, IGCTs have more superior features over IGBTs such as higher efficiency, higher short circuit current and higher power ratings. Detailed analysis and simulations are provided to validate the proposed converter topology, which confirms its potential in connecting HVDC-LCC networks
Modified variable step-size incremental conductance MPPT technique for photovoltaic systems
A highly efficient photovoltaic (PV) system requires a maximum power point tracker to extract peak power from PV modules. The conventional variable step-size incremental conductance (INC) maximum power point tracking (MPPT) technique has two main drawbacks. First, it uses a pre-set scaling factor, which requires manual tuning under different irradiance levels. Second, it adapts the slope of the PV characteristics curve to vary the step-size, which means any small changes in PV module voltage will significantly increase the overall step-size. Subsequently, it deviates the operating point away from the actual reference. In this paper, a new modified variable step-size INC algorithm is proposed to address the aforementioned problems. The proposed algorithm consists of two parts, namely autonomous scaling factor and slope angle variation algorithm. The autonomous scaling factor continuously adjusts the step-size without using a pre-set constant to control the trade-off between convergence speed and tracking precision. The slope angle variation algorithm mitigates the impact of PV voltage change, especially during variable irradiance conditions to improve the MPPT efficiency. The theoretical investigations of the new technique are carried out while its practicability is confirmed by simulation and experimental results
Tri-State Cuk Inverter with Power Decoupling for Photovoltaic Applications
This paper proposes modified modulation and control schemes for power decoupling of single-stage single-phase Cuk inverter in continuous conduction mode. Because it has inherent two inductors at the input and output side, the Cuk inverter is able to step up/down the voltage with reduced input and output current ripples. Thus, smaller filtering capacitance, especially at the input side, can be used which increases its suitability for photovoltaic applications. For the maximum power point tracking control, the oscillating even order harmonic components should be eliminated from the inverter’s input side otherwise the maximum power cannot be extracted. The proposed modulation scheme will ease the control of inverter’s input and output sides. Therefore, the 2nd order harmonic in the input current can be eliminated without adding new active semiconductor switches. In addition, the paper presents a control scheme using fractional-order repetitive control with a conventional proportional-resonant controller. With this closed-loop controller, a sinusoidal output grid current can be generated and controlled while the input current is kept constant with tim
A comparative review of three different power inverters for DC–AC applications
This paper presents a comparative review of three different widely used power inverters, namely the conventional six-switch inverter; the reduced switch count four-switch inverter; and the eight-switch inverter. The later inverter can be reconfigured as a neutral-point diode-clamped inverter at the failure of one inverter leg. The three power inverters are compared and discussed with respect to cost, complexity, losses, common mode voltage, and control techniques. The paper is intended to serve as a guide regarding selecting the appropriate inverter for each specific application. Simulation results are presented to demonstrate the performance of the three power inverters, followed by a comprehensive comparison between the three power inverters