Pseudo-ternary LiBH4_{4}–LiCl–P2_{2}S5_{5} system as structurally disordered bulk electrolyte for all-solid-state lithium batteries

The properties of the mixed system LiBH$_{4}$–LiCl–P$_{2}$S$_{5}$ are studied with respect to all-solid-state batteries. The studied material undergoes an amorphization upon heating above 60 °C, accompanied with increased Li$^{+}$ conductivity beneficial for battery electrolyte applications. The measured ionic conductivity is ∼10$^{-3}$ S cm$^{-1}$ at room temperature with an activation energy of 0.40(2) eV after amorphization. Structural analysis and characterization of the material suggest that BH$_{4}$ groups and PS4 may belong to the same molecular structure, where Cl ions interplay to accommodate the structural unit. Thanks to its conductivity, ductility and electrochemical stability (up to 5 V, Au vs. Li$^{+}$/Li), this new electrolyte is successfully tested in battery cells operated with a cathode material (layered TiS$_{2}$, theo. capacity 239 mA h g$^{-1}$) and Li anode resulting in 93% capacity retention (10 cycles) and notable cycling stability under the current density ∼12 mA g$^{-1}$ (0.05C-rate) at 50 °C. Further advanced characterisation by means of operando synchrotron X-ray diffraction in transmission mode contributes explicitly to a better understanding of the (de)lithiation processes of solid-state battery electrodes operated at moderate temperatures

Pseudo-ternary LiBH4-LiCl-P2S5 system as structurally disordered bulk electrolyte for all-solid-state lithium batteries

The properties of the mixed system LiBH4 LiCl P2S5 are studied with respect to all-solid-state batteries. The studied material undergoes an amorphization upon heating above 601C, accompanied with increased Li+ conductivity beneficial for battery electrolyte applications. The measured ionic conductivity is 10-3 Scm-1 at room temperature with an activation energy of 0.40(2) eV after amorphization. Structural analysis and characterization of the material suggest that BH4 groups and PS4 may belong to the same molecular structure, where Cl ions interplay to accommodate the structural unit. Thanks to its conductivity, ductility and electrochemical stability (up to 5 V, Au vs. Li+/Li), this new electrolyte is successfully tested in battery cells operated with a cathode material (layered TiS2, theo. capacity 239 mAh g-1) and Li anode resulting in 93% capacity retention (10 cycles) and notable cycling stability under the current density 12 mA g-1 (0.05C-rate) at 501C. Further advanced characterisation by means of operando synchrotron X-ray diffraction in transmission mode contributes explicitly to a better understanding of the (de)lithiation processes of solid-state battery electrodes operated at moderate temperatures

Complex Solid State Reactions for Energy Efficient Hydrogen Storage

Le stockage d'hydrogène en phase solide sous forme d'hydrures, est l'une des solutions non-polluantes futures pour le stockage et le transport de l'énergie. Parmi les matériaux candidats, LiBH4 a été sélectionné vu sa capacité gravimétrique élevée en hydrogène (jusqu'à 13,6 % H2 en masse). Ce matériaux possède des propriétés thermodynamiques et cinétiques insuffisamment établies pour comprendre son comportement dans les applications futures. Sa décomposition peut être facilitée en présence de l'hydrure MgH2. Ainsi, le composite MgH2-xLiBH4Hydrides for solid-state hydrogen storage are one of the future solutions - pollutant free - for the storage and the transport of energy. Among the candidates, LiBH4 was selected considering its high gravimetric hydrogen capacity (up to 13.6 wt.% H2). This material has thermodynamic and kinetic properties insufficiently established to be included in future applications. Its decomposition can be facilitated within the presence of the hydride MgH2. Thus, the composite MgH2-xLiBH4 (0< x< 3.5) reactivated by high energy ball-milling, was studied regarding its microstructural properties and stability of the phases. The desorption reaction of hydrogen, with or without additives, shows the appearance of additional phases accompanying the principal reaction. Heat capacity measurements of LiBH4 revealed the presence of an abnormal behaviour before the polymorphous transition (Ttrs = 386 K), attributed to the increase of crystal defects in agreement with the existence of a hypo-stoichiometric domaine LiBH4-ε observed at higher temperatures. The stability of the three-phase system LiBH4-LiH-B was studied resulting to the principal reaction of decomposition: LiBH4(s,l) → LiH(s) + B(s) + 1,5H2(g). Vapour pressure measurements of LiBH4 showed that H2 is the major component of decomposition with minor species such as B2H6 and BH3. The thermodynamic properties of LiBH4 were critically assessed, gathering the new data with those existing in the literature, in the aim of modelling of reactions occurring in hydride mixtures

ETUDE DES REACTIONS COMPLEXES EN PHASE SOLIDE POUR LE STOCKAGE D'HYDROGENE

Hydrides for solid-state hydrogen storage are one of the future solutions - pollutant free - for the storage and the transport of energy. Among the candidates, LiBH4 was selected considering its high gravimetric hydrogen capacity (up to 13.6 wt.% H2). This material has thermodynamic and kinetic properties insufficiently established to be included in future applications. Its decomposition can be facilitated within the presence of the hydride MgH2. Thus, the composite MgH2-xLiBH4 (0< x< 3.5) reactivated by high energy ball-milling, was studied regarding its microstructural properties and stability of the phases. The desorption reaction of hydrogen, with or without additives, shows the appearance of additional phases accompanying the principal reaction. Heat capacity measurements of LiBH4 revealed the presence of an abnormal behaviour before the polymorphous transition (Ttrs = 386 K), attributed to the increase of crystal defects in agreement with the existence of a hypo-stoichiometric domaine LiBH4- observed at higher temperatures. The stability of the three-phase system LiBH4-LiH-B was studied resulting to the principal reaction of decomposition: LiBH4(s,l) LiH(s) + B(s) + 1,5H2(g). Vapour pressure measurements of LiBH4 showed that H2 is the major component of decomposition with minor species such as B2H6 and BH3. The thermodynamic properties of LiBH4 were critically assessed, gathering the new data with those existing in the literature, in the aim of modelling of reactions occurring in hydride mixtures.Le stockage d'hydrogène en phase solide sous forme d'hydrures, est l'une des solutions nonpolluantes futures pour le stockage et le transport de l'énergie. Parmi les matériaux candidats, LiBH4 a été sélectionné vu sa capacité gravimétrique élevée en hydrogène (jusqu'à 13,6 % H2 en masse). Ce matériaux possède des propriétés thermodynamiques et cinétiques insuffisamment établies pour comprendre son comportement dans les applications futures. Sa décomposition peut être facilitée en présence de l'hydrure MgH2. Ainsi, le composite MgH2-xLiBH4 (

Morphology effects in MgH2 anode for lithium ion batteries

submittedVersio

Understanding Capacity Fading of MgH2 Conversion-Type Anodes via Structural Morphology Changes and Electrochemical Impedance

acceptedVersio

Reversibility of metal-hydride anodes in all-solid-state lithium secondary battery operating at room temperature

acceptedVersio

Lithium ionic conduction in composites of Li(BH4)0.75I0.25 and amorphous 0.75Li2S·0.25P2S5 for battery applications

acceptedVersio

Morphology effects in MgH2 anode for lithium ion batteries

In order to acquire reproducible electrodes relevant for Li ion batteries new MgH2 electrodes are successfully obtained from homogenous slurries in N-Methyl-2-Pyrrolidone “NMP” solvent. The electrodes are aimed to elucidate the contribution of the cell components to the electrochemical cycling, in terms of morphology and composition. Various electrode preparations were tested and compared regarding their interaction with Li in a half-cell. The obtained electrochemical cycling curves are discussed according to the ball-milling-induced structural morphology changes and presence of carbon additives, along with the effect of the kinetic rate on the conversion reaction mechanism