23,220 research outputs found
Confinement of Light in Disordered Photonic Lattices: A New Platform for Waveguidance
A right amount of disorder in the form of refractive index variation has been
introduced to achieve transverse localization of light 1D semi-infinite
photonic lattices. Presence of longitudinally-invariant transverse disorder
opens-up a new waveguiding mechanism.Comment: 3 page
Power-dependent speciation of volatile organic compounds in aircraft exhaust
As part of the third NASA Aircraft Particle Emissions Experiment (APEX-3, November 2005), whole air samples were collected to determine the emission rates of volatile organic compounds (VOCs) from aircraft equipped with three different gas-turbine engines (an Allison Engine 3007-A1E, a Pratt-Whitney 4158, and a Rolls-Royce RB211-535E4B). Samples were collected 1 m behind the engine exhaust plane of the engines while they were operated at powers ranging from idle up to 30% of maximum rated thrust.Exhaust emission indices (mass emitted per kilogram of fuel used) for CO and non-methane hydrocarbons (NMHCs) were calculated based on enhancements over background relative to CO 2. Emissions of all NMHCs were greatest at low power with values decreasing by an order of magnitude with increasing power. Previous studies have shown that scaling idle hydrocarbon emissions to formaldehyde or ethene (which are typically emitted at a ratio of 1-to-1 at idle) reduces variability amongst engine types. NMHC emissions were found to scale at low power, with alkenes contributing over 50% of measured NMHCs. However, as the power increases hydrocarbon emissions no longer scale to ethene, as the aromatics become the dominant species emitted. This may be due in part to a shift in combustion processes from thermal cracking (producing predominantly alkenes) to production of new molecules (producing proportionally more aromatics) as power increases. The formation of these aromatics is an intermediate step in the production of soot, which also increases with increasing power. The increase in aromatics relative to alkenes additionally results in a decrease in the hydroxyl radical reactivity and ozone formation potential of aircraft exhaust.Samples collected 30 m downwind of the engine were also analyzed for NMHCs and carbonyl compounds (acetone, 2-butanone and C 1-C 9 aldehydes). Formaldehyde was the predominant carbonyl emitted; however, the ratio of ethene-to-formaldehyde varied between the aircraft, possibly due to the sampling of transient emissions such as engine start-up and power changes. A large portion of the measured emissions (27-42% by mass) in the plume samples was made up of hazardous air pollutants (HAPs) with oxygenated compounds being most significant. © 2012
Solitonic dispersive hydrodynamics: theory and observation
Ubiquitous nonlinear waves in dispersive media include localized solitons and
extended hydrodynamic states such as dispersive shock waves. Despite their
physical prominence and the development of thorough theoretical and
experimental investigations of each separately, experiments and a unified
theory of solitons and dispersive hydrodynamics are lacking. Here, a general
soliton-mean field theory is introduced and used to describe the propagation of
solitons in macroscopic hydrodynamic flows. Two universal adiabatic invariants
of motion are identified that predict trapping or transmission of solitons by
hydrodynamic states. The result of solitons incident upon smooth expansion
waves or compressive, rapidly oscillating dispersive shock waves is the same,
an effect termed hydrodynamic reciprocity. Experiments on viscous fluid
conduits quantitatively confirm the soliton-mean field theory with broader
implications for nonlinear optics, superfluids, geophysical fluids, and other
dispersive hydrodynamic media.Comment: 8 pages, 5 figure
An exact minimum variance filter for a class of discrete time systems with random parameter perturbations
An exact, closed-form minimum variance filter is designed for a class of discrete time uncertain systems which allows for both multiplicative and additive noise sources. The multiplicative noise model includes a popular class of models (Cox-Ingersoll-Ross type models) in econometrics. The parameters of the system under consideration which describe the state transition are assumed to be subject to stochastic uncertainties. The problem addressed is the design of a filter that minimizes the trace of the estimation error variance. Sensitivity of the new filter to the size of parameter uncertainty, in terms of the variance of parameter perturbations, is also considered. We refer to the new filter as the 'perturbed Kalman filter' (PKF) since it reduces to the traditional (or unperturbed) Kalman filter as the size of stochastic perturbation approaches zero. We also consider a related approximate filtering heuristic for univariate time series and we refer to filter based on this heuristic as approximate perturbed Kalman filter (APKF). We test the performance of our new filters on three simulated numerical examples and compare the results with unperturbed Kalman filter that ignores the uncertainty in the transition equation. Through numerical examples, PKF and APKF are shown to outperform the traditional (or unperturbed) Kalman filter in terms of the size of the estimation error when stochastic uncertainties are present, even when the size of stochastic uncertainty is inaccurately identified
Predicting Intermediate Storage Performance for Workflow Applications
Configuring a storage system to better serve an application is a challenging
task complicated by a multidimensional, discrete configuration space and the
high cost of space exploration (e.g., by running the application with different
storage configurations). To enable selecting the best configuration in a
reasonable time, we design an end-to-end performance prediction mechanism that
estimates the turn-around time of an application using storage system under a
given configuration. This approach focuses on a generic object-based storage
system design, supports exploring the impact of optimizations targeting
workflow applications (e.g., various data placement schemes) in addition to
other, more traditional, configuration knobs (e.g., stripe size or replication
level), and models the system operation at data-chunk and control message
level.
This paper presents our experience to date with designing and using this
prediction mechanism. We evaluate this mechanism using micro- as well as
synthetic benchmarks mimicking real workflow applications, and a real
application.. A preliminary evaluation shows that we are on a good track to
meet our objectives: it can scale to model a workflow application run on an
entire cluster while offering an over 200x speedup factor (normalized by
resource) compared to running the actual application, and can achieve, in the
limited number of scenarios we study, a prediction accuracy that enables
identifying the best storage system configuration
The Tunisian textile industry: local responses to internationalisation.
The continuing internationalisation of the textile industry has reduced the labour cost advantages of Tunisian clothing firms. These firms have a precarious position in the international value chain, often as subcontractors and only rarely contributing high value inputs. To remain viable in the hyper competition wrought by internationalisation, firms must cut costs further or adopt an entrepreneurial approach. We examined 103 small Tunisian textile firms to find how they have responded to international competitive pressures. Our conceptual framework is entrepreneurial orientation. Employing multiple correspondence analysis and typological analysis, we identify clusters of approaches. Our typology shows three distinctive types: innovators, potentially innovative, passive imitators and a further ambiguous group. Our results show that different small firms have responded in different ways to the threats and opportunities of globalisation. However, many Tunisian firms have improved their position in the international supply chain by innovation strategies, rather than simply focusing on cost reduction
Knowledge sharing processes in Tunisian small ICT firms.
Purpose: The purpose of this paper is to examine how knowledge and information is shared by small information and communication technology firms in Tunisia. Design/methodology/approach: The paper employs a comparative case study approach. This was intended to collect data that describe processes and also to elicit information about the reasons for these processes. The authors set the study in the context of a developing country. Findings: It was found that information and knowledge is key to the operational success of these companies. Knowledge, and its application, is crucial to their competitive advantage. The companies have developed very useful internal systems for sharing information. They also have efficient methods for tapping into existing external knowledge. However, evidence was also found of immature national information sharing systems. The authors attribute this to the level of development in Tunisia and to the understandable attitudes of the firm owners. Research limitations/implications: Whilst unable to generalise empirically beyond these cases, the authors can conceptually generalise that these processes are likely to be common in similar national contexts. The implication is then that developing countries such as Tunisia may need to invest more in creating knowledge hubs. Originality/value: The paper contributes by describing knowledge sharing in a less well-researched area. Conceptually, it offers an appreciation of how knowledge sharing works in less-developed regions
Innovation culture in small Tunisian ICT firms.
Purpose: The research aims to ask whether, in the absence of overarching innovative conditions, a small firm can have an innovative culture and what its scale and scope is. Design/methodology/approach: The study employs four exploratory case studies. This methodological choice is justified in that a case study approach allows the use of the existing literature without inhibiting the detection of any unique characteristics in the Tunisian context. This context of a developing economy is likely to be different from established economies. Findings: The study finds evidence of a learning environment within the firms and a good fit with the concepts of an innovative culture. Internal knowledge sharing is evident for all companies. However, this culture faces inwards, so that the paucity of linkages and weak socialisation combines with institutional thinness to isolate the firms. Local competitive advantages are not amplified but rather are dampened by the relative absence of interaction. Research limitations/implications: Most research about innovation in the ICT sector is conducted in the context of developed countries. This paper shows the specificities and uniqueness of innovation culture in the context of a developing country. Practical implications: The findings imply that despite recent improvements, Tunisia lacks many of the regional "institutions" that produce the synergic benefits of an innovative milieu. Originality/value: The context of a developing country is novel. The value of the findings may, however, be extended to other similar countries. This is important given the role of ICT in 'catching up'
- …