Development and design of binder systems for titanium metal injection molding: An overview

Titanium metal injection molding (Ti-MIM) has been practiced since the late 1980s. Logically, the Ti-MIM practice follows the similar processes developed for the antecedent materials such as stainless steel and ceramics. Although Ti-MIM is a favorite research topic today, the issue of convincing the designers to use Ti injection-molded parts still exists. This is mainly because of the concern about contamination which seems unavoidable during the Ti-MIM process. Much information about the binder formulation, powder requirements, debinding, and sintering is available in the literature. There are several powder vendors and feedstock suppliers. However, most of the binders in the feedstock are proprietarily protected. The disclosed information on the binders used for formulating powder feedstock is very limited, which in turn discourages their adoption by engineering designers. This overview intends to discuss some of major binder systems for Ti-MIM available in the literature. It serves to provide a guideline for the Ti-MIM practitioners to choose a suitable powder feedstock

On the behavior of titanium within thermal barrier coatings and its influence on residual stress within the TGO

This research focuses on analysing the interaction between three commercially used diffusion coatings and a nickel based superalloy CMSX-4. The coatings applied are alumide, Pt-alumide and Pt-modifed γ/γ′. The research has two main themes, firstly diffusion and secondly oxidation. Results of quantitative EPMA show that titanium diffusion towards the surface varies between coatings, and has a strong correlation with the use of platinum within coatings. The concentrations of Ti within Pt-aluminide coatings after 100 hours oxidation in air at 1100°C were found to be twice as high as those within the plain aluminised CMSX-4 samples. Furthermore uphill diffusion of Ti was observed to occur within Pt-modifed γ/γ′ after the same exposure. In order to examine the effect of platinum additions on the diffusive behavior of titanium, first principle calculations using the density functional theory implementation CASTEP have been performed. In an ordered lattice structure, diffusion of a solute species must occur via the presence of defects, either anti-site (NiAl) or vacancy (VNi). Moreover clustering of these defects leads to increased opportunities for solute diffusion and hence increased diffusion rates within that structure. We have shown that the use of Pt strengthens defect formation and defect clustering within the Ni3Al L12 phase. By increasing the amount of defect clusters Ti can diffuse more freely from the substrate through the coating to the surface

Two-Dimensional FTIR as a Tool to Study the Chemical Interactions within Cellulose-Ionic Liquid Solutions

In this study two-dimensional FTIR analysis was applied to understand the temperature effects on processing cellulose solutions in imidazolium-based ionic liquids. Analysis of the imidazolium ion νC2–H peak revealed hydrogen bonding within cellulose solutions to be dynamic on heating and cooling. The extent of hydrogen bonding was stronger on heating, consistent with greater ion mobility at higher temperature when the ionic liquid network structure is broken. At ambient temperatures a blue shifted νC2–H peak was indicative of greater cation-anion interactions, consistent with the ionic liquid network structure. Both cellulose and water further impact the extent of hydrogen bonding in these solutions. The FTIR spectral changes appeared gradual with temperature and contrast shear induced rheology changes which were observed on heating above 70°C and cooling below 40°C. The influence of cellulose on solution viscosity was not distinguished on initial heating as the ionic liquid network structure dominates rheology behaviour. On cooling, the quantity of cellulose has a greater influence on solution rheology. Outcomes suggest processing cellulose in ionic liquids above 40°C and to reduce the impacts of cation-anion effects and enhance solubilisation, processing should be done at 70°C

Genetic and structural elucidation of capsular polysaccharides from Streptococcus pneumoniae serotype 23A and 23B, and comparison to serotype 23F

Streptococcus pneumoniae is a globally important encapsulated human pathogen with approximately 100 different serotypes recognized. Serogroup 23 consists of serotype 23F, present in licensed vaccines, and emerging serotypes 23A and 23B. Here, we report the previously unknown structures of the pneumococcal capsular polysaccharides serotype 23A and 23B determined using genetic analysis, NMR spectroscopy, composition and linkage analysis and Smith degradation (of polysaccharide 23A). The structure of the serotype 23A capsular polysaccharide is: \u21924)-\u3b2-D-Glcp-(1\u21923)-[[\u3b1-L-Rhap-(1\u21922)]-[Gro-(2\u2192P\u21923)]-\u3b2-D-Galp-(1\u21924)]-\u3b2-L-Rhap-(1\u2192. This structure differs from polysaccharide 23F as it features a disaccharide backbone and the di-substituted \u3b2-Gal is linked to \u3b2-Rha as a side chain. This is due to the different polymerization position catalysed by the unusually divergent repeat unit polymerase Wzy in the 23A cps biosynthesis locus. Steric crowding in 23A, confirmed by molecular models, causes the NMR signal for H-1 of the di-substituted 2,3-\u3b2-Gal to resonate in the \u3b1-anomeric region. The structure of the serotype 23B capsular polysaccharide is the same as 23F, but without the terminal \u3b1-Rha: \u21924)-\u3b2-D-Glcp-(1\u21924)-[Gro-(2\u2192P\u21923)]-\u3b2-D-Galp-(1\u21924)-\u3b2-L-Rhap-(1\u2192. The immunodominant terminal \u3b1-Rha of 23F is more sterically crowded in 23A and absent in 23B. This may explain the reported typing cross reactions for serotype 23F: slight with 23A and none with 23B

Edge- and Node-Disjoint Paths in P Systems

In this paper, we continue our development of algorithms used for topological network discovery. We present native P system versions of two fundamental problems in graph theory: finding the maximum number of edge- and node-disjoint paths between a source node and target node. We start from the standard depth-first-search maximum flow algorithms, but our approach is totally distributed, when initially no structural information is available and each P system cell has to even learn its immediate neighbors. For the node-disjoint version, our P system rules are designed to enforce node weight capacities (of one), in addition to edge capacities (of one), which are not readily available in the standard network flow algorithms.Comment: In Proceedings MeCBIC 2010, arXiv:1011.005

Hydrothermal venting in magma deserts : the ultraslow-spreading Gakkel and Southwest Indian Ridges

Author Posting. © American Geophysical Union, 2004. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geochemistry Geophysics Geosystems 5 (2004): Q08002, doi:10.1029/2004GC000712.Detailed hydrothermal surveys over ridges with spreading rates of 50–150 mm/yr have found a linear relation between spreading rate and the spatial frequency of hydrothermal venting, but the validity of this relation at slow and ultraslow ridges is unproved. Here we compare hydrothermal plume surveys along three sections of the Gakkel Ridge (Arctic Ocean) and the Southwest Indian Ridge (SWIR) to determine if hydrothermal activity is similarly distributed among these ultraslow ridge sections and if these distributions follow the hypothesized linear trend derived from surveys along fast ridges. Along the Gakkel Ridge, most apparent vent sites occur on volcanic highs, and the extraordinarily weak vertical density gradient of the deep Arctic permits plumes to rise above the axial bathymetry. Individual plumes can thus be extensively dispersed along axis, to distances >200 km, and ∼75% of the total axial length surveyed is overlain by plumes. Detailed mapping of these plumes points to only 9–10 active sites in 850 km, however, yielding a site frequency F s , sites/100 km of ridge length, of 1.1–1.2. Plumes detected along the SWIR are considerably less extensive for two reasons: an apparent paucity of active vent fields on volcanic highs and a normal deep-ocean density gradient that prevents extended plume rise. Along a western SWIR section (10°–23°E) we identify 3–8 sites, so F s = 0.3–0.8; along a previously surveyed 440 km section of the eastern SWIR (58°–66°E), 6 sites yield F s = 1.3. Plotting spreading rate (us) versus F s, the ultraslow ridges and eight other ridge sections, spanning the global range of spreading rate, establish a robust linear trend (F s = 0.98 + 0.015us), implying that the long-term heat supply is the first-order control on the global distribution of hydrothermal activity. Normalizing F s to the delivery rate of basaltic magma suggests that ultraslow ridges are several times more efficient than faster-spreading ridges in supporting active vent fields. This increased efficiency could derive from some combination of three-dimensional magma focusing at volcanic centers, deep mining of heat from gabbroic intrusions and direct cooling of the upper mantle, and nonmagmatic heat supplied by exothermic serpentinization.This research was partially supported the NOAA VENTS Program. P.J.M. and H.J.B.D. gratefully acknowledge NSF grant OPP 9911795 for support of the AMORE Expedition; P.J.M. and E.T.B. acknowledge NSF grant OPP 0107767 and the VENTS Program for development and construction of MAPRs for use in ice-covered seas. H.J.B.D. acknowledges NSF grant OCE-9907630 for support of SWIR studies. J.E.S. was supported by Deutsche Forschungsgemeinschaft grant SN15/2

Diabetes foot complications and standardized mortality rate in type 2 diabetes

Aim: To quantify the impact of foot complications on mortality outcomes in people with type 2 diabetes (T2D), and how routinely measured factors might modulate that risk. Materials and Methods: Data for individuals with T2D for 2010-2020, from the Salford Integrated Care Record (Salford, UK), were extracted for laboratory and clinical data, and deaths. Annual expected deaths were taken from Office of National Statistics mortality data. An index of multiple deprivation (IMD) adjusted the standardized mortality ratio (SMR_IMD). Life years lost per death (LYLD) was estimated from the difference between expected and actual deaths. Results: A total of 11 806 T2D patients were included, with 5583 new diagnoses and 3921 deaths during 2010-2020. The number of expected deaths was 2135; after IMD adjustment, there were 2595 expected deaths. Therefore, excess deaths numbered 1326 (SMR_IMD 1.51). No foot complications were evident in n = 9857. This group had an SMR_IMD of 1.13 and 2.74 LYLD. In total, 2979 patients had any foot complication recorded. In this group, the SMD_IMR was 2.29; of these, 2555 (75%) had only one foot complication. Patients with a foot complication showed little difference in percentage HbA1c more than 58 mmol/mol. In multivariate analysis, for those with a foot complication and an albumin-to-creatinine ratio of more than 3 mg/mmol, the odds ratio (OR) for death was 1.93, and for an estimated glomerular filtration rate of less than 60 mL/min/1.73m2, the OR for death was 1.92. Conclusions: Patients with T2D but without a foot complication have an SMR_IMD that is only slightly higher than that of the general population. Those diagnosed with a foot complication have a mortality risk that is double that of those without T2D

Nutritional Asymmetries Are Related to Division of Labor in a Queenless Ant

Eusocial species exhibit pronounced division of labor, most notably between reproductive and non-reproductive castes, but also within non-reproductive castes via morphological specialization and temporal polyethism. For species with distinct worker and queen castes, age-related differences in behavior among workers (e.g. within-nest tasks versus foraging) appear to result from physiological changes such as decreased lipid content. However, we know little about how labor is divided among individuals in species that lack a distinct queen caste. In this study, we investigated how fat storage varied among individuals in a species of ant (Dinoponera australis) that lacks a distinct queen caste and in which all individuals are morphologically similar and capable of reproduction (totipotent at birth). We distinguish between two hypotheses, 1) all individuals are physiologically similar, consistent with the possibility that any non-reproductive may eventually become reproductive, and 2) non-reproductive individuals vary in stored fat, similar to highly eusocial species, where depletion is associated with foraging and non-reproductives have lower lipid stores than reproducing individuals. Our data support the latter hypothesis. Location in the nest, the probability of foraging, and foraging effort, were all associated with decreased fat storage

World-wide distributions of lactase persistence alleles and the complex effects of recombination and selection

The genetic trait of lactase persistence (LP) is associated with at least five independent functional single nucleotide variants in a regulatory region about 14 kb upstream of the lactase gene [-13910*T (rs4988235), -13907*G (rs41525747), -13915*G (rs41380347), -14009*G (rs869051967) and -14010*C (rs145946881)]. These alleles have been inferred to have spread recently and present-day frequencies have been attributed to positive selection for the ability of adult humans to digest lactose without risk of symptoms of lactose intolerance. One of the inferential approaches used to estimate the level of past selection has been to determine the extent of haplotype homozygosity (EHH) of the sequence surrounding the SNP of interest. We report here new data on the frequencies of the known LP alleles in the 'Old World' and their haplotype lineages. We examine and confirm EHH of each of the LP alleles in relation to their distinct lineages, but also show marked EHH for one of the older haplotypes that does not carry any of the five LP alleles. The region of EHH of this (B) haplotype exactly coincides with a region of suppressed recombination that is detectable in families as well as in population data, and the results show how such suppression may have exaggerated haplotype-based measures of past selection