Program for computing partial pressures from residual gas analyzer data

A computer program for determining the partial pressures of various gases from residual-gas-analyzer data is given. The analysis of the ion currents of 18 m/e spectrometer peaks allows the determination of 12 gases simultaneously. Comparison is made to ion-gage readings along with certain other control information. The output data are presented in both tabular and graphical form

Sibling risks in cancer: clues to recessive or X-linked genes?

A systematic analysis of cancer risks to offspring and to siblings of cancer cases was carried out based on the nation-wide Swedish Family-Cancer Database. For all 13 cancer sites examined, risks to both offspring and siblings of cases of cancer at the same site were significantly elevated. The relative risk to siblings was approximately 2 fold more than the offspring risk for cancers of the prostate, testis, kidney and bladder, suggesting that recessive or X-linked susceptibility genes may be important for these cancers. Risks to siblings of cases where a parent was also affected were increased >20 fold over population rates for colorectal, ovarian, prostate and renal cancer, and for leukaemia, consistent with the effects of rare high-risk susceptibility alleles. © 2001 Cancer Research Campaign http://www.bjcancer.co

Residual stress generation in tungsten-copper brazed joint using brazing alloy

Understanding the residual stress state in brazed joints is crucial for operational design and life time performance of the part in service. High magnitudes residual stresses are expected in the joined materials following cooling from brazing temperatures (≈950°C) due to large mismatches in material properties such as coefficient of thermal expansion and Young’s modulus. This study aims at further understanding of the generation and distribution of residual stresses when brazing tungsten to copper using a eutectic gold-copper brazing alloy. This configuration is potentially useful for future divertor designs. Finite Element Analysis (FEM) has been used to predict the brazing induced stresses and residual stress measurements were carried out on the brazed joint by X-ray diffraction (XRD) to validate the prediction model. Large residual stresses are predicted and measured in the tungsten; however there is disagreement in the sign of the stress. Predicted stresses are highly tensile in nature close to the brazing interface, whereas the measured stresses are highly compressive. The disagreement is believed to be caused by the model not accurately simulating the complex brazing process. Residual stress measurements on the copper were not possible due to texturing during brazing, grain growth and significant inelastic strains and deformations. Misalignment of parent materials was also observed to significantly affect residual stresses

Residual stress generations in brazed tungsten dissimilar joints

Understanding the residual stress state in brazed joints is crucial for the operational design and lifetime performance of the part in service. High-magnitude residual stresses are expected in the joined materials following cooling from brazing temperatures (≈950 °C) due to large mismatches in the thermal and mechanical properties. This paper aims at further understanding of the residual stresses caused when brazing tungsten to copper and tungsten to 316L austenitic steel using a eutectic gold-copper brazing alloy. These configurations are potentially useful for future diverter designs. Finite element analysis has been used to predict the brazing-induced stresses and residual stress measurements were carried out on the brazed joint by X-ray diffraction to validate the prediction model. Large residual stresses are predicted and measured in the tungsten; however, there is disagreement in the nature of the stress in the tungsten-copper configuration. Predicted stresses are highly tensile in nature close to the brazing interface, whereas the measured stresses are highly compressive. The disagreement is believed to be caused by the model not accurately simulating the complex brazing process. Residual stress measurements on the copper were not possible due to texturing during brazing, grain growth, and significant inelastic strains. There is excellent correlation between the measured and predicted stresses in the tungsten-316L configuration. High-tensile stresses were predicted in the tungsten (magnitude approximately 1000 MPa close to the braze interface) and high tensile stresses were measured (magnitude approximately 800 MPa in the same region). Joint misalignment of parent materials was also observed to significantly affect the residual stresses

Higher and lower supramolecular orders for the design of self-assembled heterochiral tripeptide hydrogel biomaterials

The self-assembly behaviour of the eight stereoisomers of Val\u2013Phe\u2013Phe tripeptides under physiological conditions is assessed by several spectroscopy and microscopy techniques. We report the first examples of self-organised hydrogels from tripeptides in the L\u2013D\u2013L or D\u2013L\u2013D configuration, besides the expected gels with the D\u2013L\u2013L or L\u2013D\u2013D configuration, thus widening the scope for using amino acid chirality as a tool to drive self-assembly. Importantly, the positions of D- and L-amino acids in the gelling tripeptides determine a higher or lower supramolecular order, which translates into macroscopic gels with different rheological properties and thermal behaviours. The more durable hydrogels perform well in cytotoxicity assays, and also as peptides in solution. An appropriate design of the chirality of self-assembling sequences thus allows for the fine-tuning of the properties of the gel biomaterials. In conclusion, this study adds key details of supramolecular organization that will assist in the ex novo design of assembling chiral small molecules for their use as biomaterials

Grain refinement of stainless steel in ultrasound-assisted additive manufacturing

Metals and alloys fabricated by fusion-based additive manufacturing (AM), or 3D printing, undergo complex dynamics of melting and solidification, presenting challenges to the effective control of grain structure. Herein, we report on the use of high-intensity ultrasound that controls the process of solidification during AM of 316L stainless steel. We find that the use of ultrasound favours the columnar-to-equiaxed transition, promoting the formation of fine equiaxed grains with random crystallographic texture. Moreover, the use of ultrasound increases the number density of grains from 305 mm-2 to 2748 mm-2 despite an associated decrease in cooling rate and temperature gradient in the melt pool during AM. Our assessment of the relationship between grain size and cooling rate indicates that the formation of crystallites during AM is enhanced by ultrasound. Furthermore, the use of ultrasound increases the amount of constitutional supercooling during solidification by lowering the temperature gradient in the bulk of the melt pool, thus creating an environment that favours nucleation, growth, and survival of grains. This new understanding provides opportunities to better exploit ultrasound to control grain structure in AM-fabricated metal products.Comment: Paper published in Additive Manufacturin

Cloned defective interfering influenza virus protects ferrets from pandemic 2009 influenza A virus and allows protective immunity to be established

Influenza A viruses are a major cause of morbidity and mortality in the human population, causing epidemics in the winter, and occasional worldwide pandemics. In addition there are periodic outbreaks in domestic poultry, horses, pigs, dogs, and cats. Infections of domestic birds can be fatal for the birds and their human contacts. Control in man operates through vaccines and antivirals, but both have their limitations. In the search for an alternative treatment we have focussed on defective interfering (DI) influenza A virus. Such a DI virus is superficially indistinguishable from a normal virus but has a large deletion in one of the eight RNAs that make up the viral genome. Antiviral activity resides in the deleted RNA. We have cloned one such highly active DI RNA derived from segment 1 (244 DI virus) and shown earlier that intranasal administration protects mice from lethal disease caused by a number of different influenza A viruses. A more cogent model of human influenza is the ferret. Here we found that intranasal treatment with a single dose of 2 or 0.2 µg 244 RNA delivered as A/PR/8/34 virus particles protected ferrets from disease caused by pandemic virus A/California/04/09 (A/Cal; H1N1). Specifically, 244 DI virus significantly reduced fever, weight loss, respiratory symptoms, and infectious load. 244 DI RNA, the active principle, was amplified in nasal washes following infection with A/Cal, consistent with its amelioration of clinical disease. Animals that were treated with 244 DI RNA cleared infectious and DI viruses without delay. Despite the attenuation of infection and disease by DI virus, ferrets formed high levels of A/Cal-specific serum haemagglutination-inhibiting antibodies and were solidly immune to rechallenge with A/Cal. Together with earlier data from mouse studies, we conclude that 244 DI virus is a highly effective antiviral with activity potentially against all influenza A subtypes

Design of a hydrophobic tripeptide that self-assembles into amphiphilic superstructures forming a hydrogel biomaterial

We report the rational design of a heterochiral hydrophobic tripeptide self-assembling into amphiphilic D-superstructures that yield a self-supportive hydrogel at physiological pH. The material endures cell culture conditions and sustains fibroblast proliferation. Tripeptide superstructures are thoroughly analysed by several techniques

A 2.75-Approximation Algorithm for the Unconstrained Traveling Tournament Problem

A 2.75-approximation algorithm is proposed for the unconstrained traveling tournament problem, which is a variant of the traveling tournament problem. For the unconstrained traveling tournament problem, this is the first proposal of an approximation algorithm with a constant approximation ratio. In addition, the proposed algorithm yields a solution that meets both the no-repeater and mirrored constraints. Computational experiments show that the algorithm generates solutions of good quality.Comment: 12 pages, 1 figur

Evaluating the Economic Potential for Geological Hydrogen Storage in Australia

Australia has ambitions to become a major global hydrogen producer by 2030. The establishment of Australia’s and the world’s hydrogen economy, however, will depend upon the availability of affordable and reliable hydrogen storage. Geological hydrogen storage is a practical solution for large scale storage requirements ensuring hydrogen supply can always meet demand, and excess renewable electricity can be stored for later use, improving electricity network reliability. Hosting thick, underground halite (salt) deposits and an abundance of onshore depleted gas fields, Australia is well placed to take advantage of geological hydrogen storage options to support its ambition of building a global hydrogen hub export industry. Using the Bluecap modelling software, we identify regions in Australia that are potentially profitable for large scale hydrogen production and storage. We use the results of this work to suggest high-potential regions for hydrogen development, supporting policymaker and investor decisions on the locations of new infrastructure and hydrogen projects in Australia