Nano-droplets deposited in microarrays by femtosecond Ti:sapphire laser-induced forward transfer

The authors present the deposition of nanoscale droplets of Cr using femtosecond Ti:Sapphire Laser-Induced Forward Transfer. Deposits around 300 nm in diameter, significantly smaller than any previously reported, are obtained from a 30 nm thick source film. Deposit size, morphology, and adhesion to a receiver substrate as functions of applied laser fluence are investigated. We show that deposits can be obtained from previously irradiated areas of the source material film with negligible loss of deposition quality, allowing sub-spot size period microarrays to be produced without the need to move the source film

Development of cyanide for feral pig and fox control

This report provides an overview of a series of pig- and fox-baiting research projects conducted 2005–2010. It is intended to collate and summarise the outcomes of these unpublished projects, including the completed pen and field trials, and provide recommendations for future research. This review will provide a useful reference document to support further research

Space station common module network topology and hardware development

Conceptual space station common module power management and distribution (SSM/PMAD) network layouts and detailed network evaluations were developed. Individual pieces of hardware to be developed for the SSM/PMAD test bed were identified. A technology assessment was developed to identify pieces of equipment requiring development effort. Equipment lists were developed from the previously selected network schematics. Additionally, functional requirements for the network equipment as well as other requirements which affected the suitability of specific items for use on the Space Station Program were identified. Assembly requirements were derived based on the SSM/PMAD developed requirements and on the selected SSM/PMAD network concepts. Basic requirements and simplified design block diagrams are included. DC remote power controllers were successfully integrated into the DC Marshall Space Flight Center breadboard. Two DC remote power controller (RPC) boards experienced mechanical failure of UES 706 stud-mounted diodes during mechanical installation of the boards into the system. These broken diodes caused input to output shorting of the RPC's. The UES 706 diodes were replaced on these RPC's which eliminated the problem. The DC RPC's as existing in the present breadboard configuration do not provide ground fault protection because the RPC was designed to only switch the hot side current. If ground fault protection were to be implemented, it would be necessary to design the system so the RPC switched both the hot and the return sides of power

3D geometric modelling of discontinuous fibre composites using a force-directed algorithm

A geometrical modelling scheme is presented to produce representative architectures for discontinuous fibre composites, enabling downstream modelling of mechanical properties. The model generates realistic random fibre architectures containing high filament count bundles (>3k) and high (~50%) fibre volume fractions. Fibre bundles are modelled as thin shells using a multi-dimension modelling strategy, in which fibre bundles are distributed and compacted to simulate pressure being applied from a matched mould tool. FE simulations are performed to benchmark the in-plane mechanical properties obtained from the numerical model against experimental data, with a detailed study presented to evaluate the tensile properties at various fibre volume fractions and specimen thicknesses. Tensile modulus predictions are in close agreement (less than 5% error) with experimental data at volume fractions below 45%. Ultimate tensile strength predictions are within 4.2% of the experimental data at volume fractions between 40%-55%. This is a significant improvement over existing 2D modelling approaches, as the current model offers increased levels of fidelity, capturing dominant failure mechanisms and the influence of out-of-plane fibres

Secondary user relations in emerging mobile computing environments

Mobile technologies are enabling access to information in diverse environ.ments, and are exposing a wider group of individuals to said technology. Therefore, this paper proposes that a wider view of user relations than is usually considered in information systems research is required. Specifically, we examine the potential effects of emerging mobile technologies on end-­‐user relations with a focus on the ‘secondary user’, those who are not intended to interact directly with the technology but are intended consumers of the technology’s output. For illustration, we draw on a study of a U.K. regional Fire and Rescue Service and deconstruct mobile technology use at Fire Service incidents. Our findings provide insights, which suggest that, because of the nature of mobile technologies and their context of use, secondary user relations in such emerging mobile environments are important and need further exploration

The development of a light-weight, long-life diphacinone rodent bait

Ross, J.G., Eason, C.T., Sam, S., Shapiro, L., Blackie, H., MacMorran, D., Aylett, P., Tucker, N., Razzaq, H

Encapsulated sodium nitrite as a new toxicant for possum control in New Zealand

Sodium nitrite (NaNO₂), a commonly used food preservative, has been researched in New Zealand for the control of brushtail possums (Trichosurus vulpecula). In sufficiently high doses, NaNO₂ is toxic because it disrupts circulatory transport of oxygen. As NaNO₂ is very bitter, encapsulation and mixing it through a highly palatable bait formulation is necessary to effectively deliver it to target pest species. In no-choice cage trials, 12/12 possums consumed a lethal dose of toxic paste bait and died on average after 95.6 minutes (±4.9 SE). In two-choice cage trials 7/8 possums consumed a lethal dose of toxic paste bait and died on average after 96.7 minutes (±11.4 SE). Two field trials targeting possums using this toxic paste in bait stations reduced their abundance by 81.2% (± 2.5% SE) and 72.7% (± 1.6% SE) respectively. NaNO₂ paste, known as BaitRite, has been registered in New Zealand as a vertebrate toxic agent for controlling possums

Epitaxial growth of high quality ZnS films on sapphire and silicon by pulsed laser deposition

We report for the first time, epitaxial growth of high-quality ZnS films on sapphire and silicon substrates, using pulsed laser deposition. X-ray diffraction results show that at all growth temperatures from 200°C to 680°C, epitaxial wurtzite (002) ZnS films have been successfully grown on (1012) sapphire and (001) silicon substrates. X-ray diffraction data yield full width at half maximum 2theta values of 0.13° for as-grown samples, compared with 28 values or 0.09° and 0.08° for the bare sapphire and silicon substrates respectively

Association between longer hospitalization and development of de novo donor specific antibodies in simultaneous liver–kidney transplant recipients

© 2019, © 2019 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group. Background:De novo Donor Specific Antibodies (DSA) are considered as a risk factor for the kidney allograft outcomes in recipients after simultaneous liver–kidney transplantation (SLKT). We hypothesized that length of hospital stay (LOS) might be associated with de novo DSA development of due to the increased likelihood of receiving blood transfusions with reduced immunosuppressive regimens. Methods: This study is a single-center, retrospective cohort study consisting of 85 recipients who underwent SLKT from 2009 to 2018 in our hospital. We divided the patients into two groups according to LOS [long hospital stay (L) group (LOS \u3e14 days) and short hospital stay (S) group (LOS ≤14 days)]. Propensity score (PS) has been created using logistic regression to predict LOS greater than median of 14 days. The association between the presence of de novo DSA and LOS was assessed by logistic regression models adjusted for PS. Results: The mean age at transplantation of the entire cohort was 55.5 ± 10.1 years. Sixty percent of the recipients were male and Caucasian. Median LOS in (L) group was three-fold longer than (S) group [L: median 30 days (IQR: 21–52), S: median 8.5 days (IQR: 7–11)]. Eight patients developed de novo DSA after SLKT (9.4%), all of them were in (L) group. Longer LOS was significantly associated with higher risk of development of de novo DSA in unadjusted (OR+ each 5 days: 1.09, 95% CI:1.02–1.16) and PS adjusted (OR+ each 5 days: 1.11, 95% CI:1.02–1.21) analysis. Conclusion: Longer hospitalization is significantly associated with the development of de novo DSA in SLKT