Probing the role of single defects on the thermodynamics of electric-field induced phase transitions

The kinetics and thermodynamics of first order transitions is universally controlled by defects that act as nucleation sites and pinning centers. Here we demonstrate that defect-domain interactions during polarization reversal processes in ferroelectric materials result in a pronounced fine structure in electromechanical hysteresis loops. Spatially-resolved imaging of a single defect center in multiferroic BiFeO3 thin film is achieved, and the defect size and built-in field are determined self-consistently from the single-point spectroscopic measurements and spatially-resolved images. This methodology is universal and can be applied to other reversible bias-induced transitions including electrochemical reactions.Comment: 34 pages,4 figures, high quality figures are available upon request, submitted to Phys. Rev. Let

Nanoelectromechanics of Piezoresponse Force Microscopy

To achieve quantitative interpretation of Piezoresponse Force Microscopy (PFM), including resolution limits, tip bias- and strain-induced phenomena and spectroscopy, analytical representations for tip-induced electroelastic fields inside the material are derived for the cases of weak and strong indentation. In the weak indentation case, electrostatic field distribution is calculated using image charge model. In the strong indentation case, the solution of the coupled electroelastic problem for piezoelectric indentation is used to obtain the electric field and strain distribution in the ferroelectric material. This establishes a complete continuum mechanics description of the PFM contact mechanics and imaging mechanism. The electroelastic field distribution allows signal generation volume in PFM to be determined. These rigorous solutions are compared with the electrostatic point charge and sphere-plane models, and the applicability limits for asymptotic point charge and point force models are established. The implications of these results for ferroelectric polarization switching processes are analyzed.Comment: 81 pages, 19 figures, to be published in Phys. Rev.

Suppression of Octahedral Tilts and Associated Changes of Electronic Properties at Epitaxial Oxide Heterostructure Interfaces

Epitaxial oxide interfaces with broken translational symmetry have emerged as a central paradigm behind the novel behaviors of oxide superlattices. Here, we use scanning transmission electron microscopy to demonstrate a direct, quantitative unit-cell-by-unit-cell mapping of lattice parameters and oxygen octahedral rotations across the BiFeO3-La0.7Sr0.3MnO3 interface to elucidate how the change of crystal symmetry is accommodated. Combined with low-loss electron energy loss spectroscopy imaging, we demonstrate a mesoscopic antiferrodistortive phase transition and elucidate associated changes in electronic properties in a thin layer directly adjacent to the interface

Finite size and intrinsic field effect on the polar-active properties of the ferroelectric-semiconductor heterostructures

Using Landau-Ginzburg-Devonshire approach we calculated the equilibrium distributions of electric field, polarization and space charge in the ferroelectric-semiconductor heterostructures containing proper or incipient ferroelectric thin films. The role of the polarization gradient and intrinsic surface energy, interface dipoles and free charges on polarization dynamics are specifically explored. The intrinsic field effects, which originated at the ferroelectric-semiconductor interface, lead to the surface band bending and result into the formation of depletion space-charge layer near the semiconductor surface. During the local polarization reversal (caused by the inhomogeneous electric field induced by the nanosized tip of the Scanning Probe Microscope (SPM) probe) the thickness and charge of the interface layer drastically changes, it particular the sign of the screening carriers is determined by the polarization direction. Obtained analytical solutions could be extended to analyze polarization-mediated electronic transport.Comment: 35 pages, 12 figures, 1 table, 2 appendices, to be submitted to Phys. Rev.

Impact of the tip radius on the lateral resolution in piezoresponse force microscopy

We present a quantitative investigation of the impact of tip radius as well as sample type and thickness on the lateral resolution in piezoresponse force microscopy (PFM) investigating bulk single crystals. The observed linear dependence of the width of the domain wall on the tip radius as well as the independence of the lateral resolution on the specific crystal-type are validated by a simple theoretical model. Using a Ti-Pt-coated tip with a nominal radius of 15 nm the so far highest lateral resolution in bulk crystals of only 17 nm was obtained

Nanoscale piezoelectric response across a single antiparallel ferroelectric domain wall

Surprising asymmetry in the local electromechanical response across a single antiparallel ferroelectric domain wall is reported. Piezoelectric force microscopy is used to investigate both the in-plane and out-of- plane electromechanical signals around domain walls in congruent and near-stoichiometric lithium niobate. The observed asymmetry is shown to have a strong correlation to crystal stoichiometry, suggesting defect-domain wall interactions. A defect-dipole model is proposed. Finite element method is used to simulate the electromechanical processes at the wall and reconstruct the images. For the near-stoichiometric composition, good agreement is found in both form and magnitude. Some discrepancy remains between the experimental and modeling widths of the imaged effects across a wall. This is analyzed from the perspective of possible electrostatic contributions to the imaging process, as well as local changes in the material properties in the vicinity of the wall

Electronic Transport Imaging in a Multiwire SnO2 ChemFET Device

The electronic transport and the sensing performance of an individual SnO2 crossed nanowires device in a three-terminal field effect configuration were investigated using a combination of macroscopic transport measurements and Scanning Surface Potential Microscopy (SSPM). The structure of the device was determined using both Scanning Electron- and Atomic Force Microscopy data. The SSPM images of two crossed 1D nanostructures, simulating a prototypical nanowire network sensors, exhibit large dc potential drops at the crossed-wire junction and at the contacts, identifying them as the primary electroactive elements in the circuit. The gas sensitivity of this device was comparable to those of sensors formed by individual homogeneous nanostructures of similar dimensions. Under ambient conditions, the DC transport measurements were found to be strongly affected by field-induced surface charges on the nanostructure and the gate oxide. These charges result in a memory effect in transport measurements and charge dynamics which are visualized by SSPM. Finally, scanning probe microscopy is used to measure the current-voltage characteristics of individual active circuit elements, paving the way to a detailed understanding of chemical functionality at the level of an individual electroactive element in an individual nanowire.Comment: 30 pages, 8 figures, accepted to J. Appl. Phy

Experimental study of the strength characteristics of fixation of the symphysis pubis with an original plate for the reconstruction of the anterior pelvic semi-ring

The destabilization of bone fixators has led to repeated surgical interventions that increased the risk of migrations of metal fixators, infectious and inflammatory complications as well. The modern trends in hip bone injury surgery are related to developing and using of metal fixators, which are effective in acute injury; however, sometimes the condition of the patient and the technical support of hospitals don’t allow performing surgery in the acute period, and these metal fixators are ineffective for chronic damage. Consequently, until now, the problem of finding the optimal design of structures for fixing chronic damage of anterior pelvic semi-ring which will be able to exclude its destabilization, is still of current interest.The purpose of the study: developing and experimental researching of durable features of original plate for reconstruction of the anterior pelvic semi-ring.Materials and methods: In order to ensure stable fixation of chronic pelvic injuries, the original metal plates have been worked out. They are made individually in accordance with the anatomical and functional structures of the anterior pelvic semi-ring of the patient with using additive technologies. The study of the reliability of the different variants of ostiosynthesis of the anterior pelvic semi-ring with using well-known pelvic plates and a new original design was carried out. Stability tests for different plate fixing methods and mechanical strength of metallophyxators were carried out on a universal test machine of LFM-50kN series.Results: one plate fixation in tensile test showed the lowest result – 0.341 kN, a low result of shear loads was received with the same object. The best result was shown by the polyaxial monolithic plate fixation in case of stretching – 0.51 kN at the shear loads – 0.591 kN. Necessary force applied to destabilizing of the metal structure while using a polyaxial monolithic plate was a half-higher than stretched, and a third higher than at shear loads, it demonstrates the benefits of using these metal fixators.Conclusion: It is experimentally confirmed that the polyaxial monolithic plate provides the highest stability of fixing anterior pelvic semi-ring indicator in contrast with fixing of one or two plates