Heat flux evaluation in high temperature ring-on-ring contacts

A comprehensive methodology to investigate heat flux in a ring-on-ring tribometer is presented. Thermal fluxes under high contact pressures and temperature differences were evaluated through an experimental campaign and by a numerical procedure of inverse analysis applied to surface temperature measurements. An approximation of a two-dimensional time-dependent analytical solution for the temperature distribution was first developed and subsequently adapted to mimic the specific testing configuration characteristics; the problem was finally simplified to enable further inverse analysis. Experiments were performed using an innovative high temperature ring-on-ring tribometer. The evaluated contact heat transfer rates were reported as a function of normal load and temperature difference between the discs under steady-state conditions; the results reported here show that, in the present test configuration, the temperature difference has stronger influence than the applied load in terms of heat transfer induced by contact

Gnss and photogrammetric uav derived data for coastal monitoring: A case of study in emilia-romagna, italy

GNSS real-time techniques and UAV photogrammetry can be alternative methods for the monitoring of sand beaches. This activity is particularly important in environments such as the Emilia-Romagna coastline. In this paper, two couples of surveys (year 2019 and 2020) performed using GNSS or a low-cost UAV equipment over a common area were compared in order to analyse: point-wise height differences, profile shapes along defined sections, and volumes variations over time. Both surveys were aligned to the same reference benchmark through GNSS measurements. The highest discrepancies between the two surveying methods (tens of cm) were found in vegetated areas and along the shoreline, otherwise, the height differences are mainly within the 10 cm level. In terms of volumes, excluding the most critical areas, differences close to zero can be found. Obtained results show that GNSS and UAV photogrammetry provides similar results, at least for quite flat terrains and when decimetre-level accuracy is required

How do cardiologists select patients for dual antiplatelet therapy continuation beyond 1 year after a myocardial infarction? Insights from the EYESHOT Post-MI Study

Background: Current guidelines suggest to consider dual antiplatelet therapy (DAPT) continuation for longer than 12 months in selected patients with myocardial infarction (MI). Hypothesis: We sought to assess the criteria used by cardiologists in daily practice to select patients with a history of MI eligible for DAPT continuation beyond 1 year. Methods: We analyzed data from the EYESHOT Post-MI, a prospective, observational, nationwide study aimed to evaluate the management of patients presenting to cardiologists 1 to 3 years from the last MI event. Results: Out of the 1633 post-MI patients enrolled in the study between March and December 2017, 557 (34.1%) were on DAPT at the time of enrolment, and 450 (27.6%) were prescribed DAPT after cardiologist assessment. At multivariate analyses, a percutaneous coronary intervention (PCI) with multiple stents and the presence of peripheral artery disease (PAD) resulted as independent predictors of DAPT continuation, while atrial fibrillation was the only independent predictor of DAPT interruption for patients both at the second and the third year from MI at enrolment and the time of discharge/end of the visit. Conclusions: Risk scores recommended by current guidelines for guiding decisions on DAPT duration are underused and misused in clinical practice. A PCI with multiple stents and a history of PAD resulted as the clinical variables more frequently associated with DAPT continuation beyond 1 year from the index MI

Performance of Atlas GNSS Global Correction Service for High-Accuracy Positioning

In the last decade, a number of correction services for global navigation satellite systems (GNSS) precise positioning have been developed, mainly for offshore applications, based on a precise point positioning (PPP) real-time processing. These allow receiving corrections without the need for an internet connection or reference benchmarks around the survey area. In the paper, we tested the Atlas correction service implemented in a Stonex S900A machine (Monza, Italy), with the purpose to verify its performances under optimal operational conditions and in the practical case of a land survey on several benchmarks along the Adriatic coast. The data analysis focused on: accuracy with respect to the reference frame, repeatability of the coordinates considering short and long acquisition periods, time to initialize the survey, and reliability of the formal errors provided by the instrument. The system confirmed the declared performances in most cases and is shown to be a viable alternative to other GNSS techniques also for land surveys where no obstacles affect the sky visibility

Impact of Multiconstellation on Relative Static GNSS Positioning

none4noUntil a few years ago, a precise survey was only possible using global positioning system (GPS) and Global'naja Navigacionnaja Sputnikovaja Sistema (GLONASS) constellations, but the result was not guaranteed under conditions of poor sky visibility, as in urban canyons. Currently, the number of Global Navigation Satellite System (GNSS) satellites in orbit has strongly increased thanks to the great evolution of the Galileo and the Beidou constellations. In this paper, we investigate the impact of using different constellations and their combinations, in static positioning with the classical differencing approach. For this purpose, two distinct baselines of different lengths (10 and 60 km) were processed using commercial software over a period of one year (2018.24-2019.24). Data were acquired by permanent stations belonging to the European Permanent Network (EPN) network providing 24-h observing sessions. Two datasets were tested, one consisting of 24-h Receiver Independent Exchange Format (RINEX) files and the other considering only 2-h sessions of data acquisition. In both cases, a one-year-long time span has been considered. The baselines were processed considering each of the four GNSS constellations and a series of combinations, for a total of eight solutions. Results have been evaluated looking at the accuracy and repeatability of the coordinates, together with the main constellation parameters. During the analyzed period the number of contemporary visible satellites of the BeiDou constellation was still too poor over the considered area, and therefore this constellation did not provide comparable precisions in respect to the others. Positioning precision provided by the Galileo constellation has shown to be very close to those given by GPS or GLONASS, with a significant difference only on the height component, especially in the case of processing 2-h data. As for 24-h observing sessions, the use of multiconstellation observables actually leads to small improvements in precision with respect to the use of GPS data only, mainly appreciable considering the vertical component. The GPS-Galileo combination gives quite the same performances of the GPS-GLONASS one, but it can potentially take advantage of the integrity message provided by the European constellation.mixedPoluzzi L.; Tavasci L.; Vecchi E.; Gandolfi S.Poluzzi L.; Tavasci L.; Vecchi E.; Gandolfi S

15 Years of the Italian GNSS Geodetic Reference Frame (RDN): Preliminary Analysis and Considerations

In 2011, the IGMI (Istituto Geografico Militare Italiano) defined the new Italian geodetic reference, materialized by the Rete Dinamica Nazionale (RDN), a cluster of 99 GNSS permanent stations located in Italy and, few of them, in neighbouring areas. RDN also includes some IGS and EPN sites, so that it constitutes a densification of those two networks. The official coordinates of the 99 GNSS stations were initially obtained by computing a limited period of 28 days starting from the end of 2007 and aligned to the datum ETRS89-ETRF2000 at epoch 2008.0. After years of continuously acquired data, other studies published the stations’ coordinates together with the associated velocities. This paper presents the updated results of the velocity trends considering the whole dataset now available, consisting of 15 years of data. The analysis considered only the 77 stations that worked consistently for at least five years. The workflow starts with the archive organization and pre-analysis, followed by the geodetic computation using the Precise Point Positioning approach implemented in the GIPSYX software. After the post-processing of the solutions, which included the alignment to the ETRF2000 frame and the analysis of discontinuities, the mean velocities have been computed. The latter were compared to those estimated in a previous work basing on 8 years long dataset. The comparison shows the overall agreement between the linear trends, but also highlights the importance of considering the whole dataset nowadays available to assess the behaviour of those few sites who underwent velocity changes over time

Super-resolution of thermal images using an automatic total variation based method

The relatively poor spatial resolution of thermal images is a limitation for many thermal remote sensing applications. A possible solution to mitigate this problem is super-resolution, which should preserve the radiometric content of the original data and should be applied to both the cases where a single image or multiple images of the target surface are available. In this perspective, we propose a new super-resolution algorithm, which can handle either single or multiple images. It is based on a total variation regularization approach and implements a fully automated choice of all the parameters, without any training dataset nor a priori information. Through simulations, the accuracy of the generated super-resolution images was assessed, in terms of both global statistical indicators and analysis of temperature errors at hot and cold spots. The algorithm was tested and applied to aerial and terrestrial thermal images. Results and comparisons with state-of-the-art methods confirmed an excellent compromise between the quality of the high-resolution images obtained and the required computational time