365 research outputs found
Composition of fish communities in macrotidal salt marshes of the Mont Saint-Michel bay (France)
At least 100 fish species are known to be present in the intertidal areas (estuaries, mudflats and salt marshes) of Mont Saint-Michel Bay. These and other comparable shallow marine coastal waters, such as estuaries and lagoons, play a
nursery role for many fish species. However, in Europe little attention has been paid to the value of tidal salt marshes for fishes. Between March 1996 and April 1999, 120 tides were sampled in a tidal creek. A total of 31 species were caught. This community was largely dominated by mullets (Liza ramada represent 87% of the total biomass) and sand gobies(Pomatoschistus minutus and P. lozanoi represent 82% of the total numbers). These species and also Gasterosteus aculeatus, Syngnathus rostellatus, Dicentrarchus labrax, Mugil spp., Liza aurata and Sprattus sprattus were the most frequent species (>50% of monthly frequency of occurrence). In Europe, salt marshes and their creeks are flooded only during high spring tides. So, fishes only invade this environment during short immersion periods, and no species can be considered as marsh
resident. But, the salt marsh was colonized by fish every time the tide reached the creek, and during the short time of flood, dominant fishes fed actively and exploited the high productivity. Nevertheless, this study shows that there is little interannual variation in the fish community and there are three ‘ seasons ’ in the fish fauna of the marsh. Marine straggler and marine estuarine dependent species colonize marshes between spring (recruitment period in the bay) and autumn before returning into deeper adjacent waters. Estuarine fishes are present all year round with maximum abundances in the end of summer. The presence of fishes confirms that this kind of wetland plays an important trophic and nursery role for these species. Differences in densities and stages distribution of these species into Mont Saint-Michel systems (tidal mudflats, estuaries and tidal salt marshes) can reduce the trophic competition
Le marais doux endigué de Bourgneuf-Machecoul (Pays de Loire) Premier éléments de connaissance du peuplement piscicole. Relation ichtyofaune-habitat et problèmes majeurs de gestion (Maroc)
Le peuplement ichtyologique d'un marais littoral endigué, géré en eau douce, a été étudié sur une zone de 2 700 ha, située au nord du marais Breton-Vendéen (Loire-Atlantique, France). Le réseau hydraulique, qui représente près de 16 % de cette surface, se compose, d'environ 91 m de linéaire de fossés par ha (en tout 234 km) et de bassins présents uniquement dans la partie d'origine salicole du marais. Les hauteurs d'eau, l'envasement et le recouvrement par la végétation aquatique dépendent de la gestion humaine et sont très variables (moyennes respectives : 42 cm; 43 cm; 70 %). Cela se traduit par un morcellement spatial de l'habitat pour les poissons. La stratégie d'échantillonnage adoptée, qui tient compte de cette hétérogénéité, a permis de décrire un peuplement comportant 21 espèces. Dominé par les poissons-chats et par les anguilles, ce dernier est caractéristique de la zone à brèmes des cours d'eau. Les abondances sont relativement élevées (en moyenne 315 kg/ha et 11 460 poissons/ha), mais elles sont très hétérogènes. L'évolution qualitative et quantitative de la répartition spatio-temporelle est décrite à l'aide d'une analyse factorielle des correspondances portant sur 74 échantillons prélevés par pêche électrique entre 1987 et 1989. Bien que l'approche de ce milieu soit complexe et les références bibliographiques relativement rares, l'analyse des premières données permet d'ores et déjà d'identifier quelques problèmes de gestion ayant des répercussions directes sur le peuplement piscicole de cette zone.The dammed up marshes of the French Atlantic coast cover about 200 000 ha between River Vilaine and the « Bassin d'Arcachon ». Eighty eight % are managed with freshwater. They constitute original environments initially created for agriculture or for salt production, and they are now threatened by land abandonment within the next decade. Concurrently to aquaculture (in created or existing ponds), exploitation of the fish stocks in the ditchweb is likely to encourage a diversification of agricultural activities. Unfortunately, bibliographic analysis reveals the relative scarceness of research about sampling methods and qualitative or quantitative characteristics of these fish communities. This is quite surprising considering the importance of the ditchwed of this kind of environment outlined by several authors. In the Netherlands, BELTMANN (1984) assessed that there is a total of 400 000 km of ditches. In France, the littoral dyked marshes of the Atlantic coast couid comprise 20 000 km of ditches and about 24 000 ha of open water. The present work provides for the first data on the fish community of Bourgneuf marsh.The northern part of the marsh of Bourgneuf, 2 700 ha provided whith f reshwater, contains nearly every kind of landscapes found throughout the whole Breton-Vendéen marsh. The pattern of the ditch network strongly changes from a zone to another (fig.1) : presence of former salt pans in the western part, regular geometric shapes in the recently created polders next to the River Falleron, irregular ditchweb pattern in the eastern part. The average density of the ditch network is 91 m of ditches per ha, totalizing 234 km in the study area. The total surface of open water, composed of ditches and basins (former salt pans), covers 411 ha (over 15 % of the study site). Diversity of ditch types occurs at fine scales (<1 000 m2), they vary according to their widths (0,3 to 7 m), depths (average, 42 cm; SD, 20,4), thickness of silt layer (average, 43 cm; SD, 42) and their hydrophyte vegetation cover (average, 70 %; SD, 60 %). As a consequence of this heterogeneity, available habitats are scattered over the marsh (mosaïc distribution). A nested sampling (FRONTIER, 1983) was carried out to take into account this high heterogeneity : 5 sampling areas were selected randomly. In each one, 3 to 5 ditches were chosen according to their characteristics (see above). Sampling stations were delimited by 2 stop nets (5 mm mesh) settled 30 m apart, in order to avoid fish migration. Field work was conducted using « Heron » electric fishing material (see LAMARQUE et al., 1978). In each ditch-section, we carried out as many successive catches as necessary to apply the maximum likelihood weighted estimation method of CARLE and STRUB (1978). Nine to 19 stations were sampled at 5 periods, between 1987 and 1989. A total of 74 samples were collected.The fish community was composed of 21 species (table 1) and corresponded to the bream zone of Verneaux's classification (1977). The densities and biomass were quite high (on average 315 kg/ha and 11 460 fishes/ha) but very variable (0 to 2 120 kg/ ha and 0 to 39 300 fishes/ha). The catfish, Ictalurus nebulosus (170 kg/ha), the eel, Anguilla anguilla (47 kg/ha) and the tench, Tinca tinca (28 kg/ha), represented on average 77,5 % of the standing crop, but their spatial distribution was very irregular. These estimates are assumed to be reliable considering that the data used for the calculations were provided by a sampling design which permits to respect the basic assumptions of the removal method. (f) The population size could only change because of the fishings (no migration because of the stop nets; no recruitment/death because of the short duration of the fishing sequences). (ii) The standard sampling design permitted to reduce the variations of the catch probabilities between the successive removals. Several studies have shown that this removal method under-estimates by about 20 % the true size of the fish populations (e. g. BOHLIN and SUNDSTROM, 1977; MAHON, 1980). But they were based on Zippin's method, and the estimator of CARLE and STRUB (1978), that we used, was shown to be more robust (COWX, 1983; GERDEAUX, 1987). Nevertheless, we assume that the values presented in this paper provide for an approached information on the sizes of the studied fish populations.To assess the fish-habitat relationship, a correspondence analysis (fig. 2) was performed on the 74 samples X 17 species matrix (excluding the sticklebacks, Gaslerosteus aculeatus and Pungitius pungitius, which population size estimations failed because of their low catchabilities). Four groups of samples were ordinated according to their specific richness and the species they contained. Several habitat parameters were projected on F1-F2 factorial map (fig. 3). Hydrophyte cover, thickness of silt layer, water depth (fig. 3 and 4), which are directly controlled by human maintenance, appeared to be the major structuring habitat parameters for the fish community. In the deepest and less silted stations, the communities were rich (on average 11 species; group 4, fig. 2). Predators such as pike-perch, Stizostedion lucioperca, and perch, Perca fluviatilis, occurred, and cold water species were found, such as minnow, Phoxinus phoxinus, or chub, Leuciscus cephalus. When the silt layer was thicker and the water level was intermediate, the specific richness decreased (average, 6,2 species) and the community was either dominated by the cattish (group 2, fig. 2) or by the rudd, Scardinius erythrophtalmus (group 3, fig. 2), according to the importance of the aquatic vegetation cover. Habitats with thickest silt layers, shallowest waters and maximum aquatic vegetation cover contained the poorest communities (average 3,9 species) dominated by eel (group 1, fig. 2). There is also evidence that the diversity of the community has progressively decreased since 1987 (fig. 5). The most stenothermous species disappeared, and the importance of the catfish increased : it doubled between May 1987 and September 1989 (fig. 6). Although the eel is the species most adapted to this environment, we emphasize the diminution of its biomass (fig. 7). These phenomena could be partly due to the climate (cold winter in 1987, important swelling in January 1988 and 2 droughts in summers 1988 and 1989). But they are mainly caused by the water management policy which is intended to favour agriculture by keeping stable water levels (evacuation of swellings) and by preventing the freshwater part from the marine influence (collective sluice gates). This does mot permit an optimal breeding of the species that have to spawn on flooded meadows, neither a proper colonisation of the marsh by elvers
Optimization of Piezoelectric Electrical Generators Powered by Random Vibrations
This paper compares the performances of a vibrationpowered electrical
generators using PZT piezoelectric ceramic associated to two different power
conditioning circuits. A new approach of the piezoelectric power conversion
based on a nonlinear voltage processing is presented and implemented with a
particular power conditioning circuit topology. Theoretical predictions and
experimental results show that the nonlinear processing technique may increase
the power harvested by a factor up to 4 compared to the Standard optimization
technique. Properties of this new technique are analyzed in particular in the
case of broadband, random vibrations, and compared to those of the Standard
interface.Comment: Submitted on behalf of TIMA Editions
(http://irevues.inist.fr/tima-editions
Building governance and energy efficiency: Mapping the interdisciplinary challenge
Improving the energy efficiency of multi-owned properties (MoPs)—commonly known as apartment or condominium buildings—is central to the achievement of European energy targets. However, little work to date has focused on how to facilitate retrofit in this context. Drawing on interdisciplinary Social Sciences and Humanities expertise in academia, policy and practice, this chapter posits that decision-making processes within MoPs might provide a key to the retrofit challenge. Existing theories or models of decision-making, applied in the MoP context, might help to explain how collective retrofit decisions are taken—or overlooked. Insights from case studies and practitioners are also key. Theories of change might then be employed to develop strategies to facilitate positive retrofit decisions. The chapter maps the issues and sets an agenda for further interdisciplinary research in this novel area
Search for the disappearance of muon antineutrinos in the NuMI neutrino beam
We report constraints on muon antineutrino oscillation parameters that were obtained by using the two MINOS detectors to measure the 7% antineutrino component of the NuMI neutrino beam. In the Far Detector, we select 130 events in the charged-current muon antineutrino sample, compared to a prediction of 136.4 +/- 11.7(stat) ^{+10.2}_{-8.9}(syst) events under the assumption |dm2bar|=2.32x10^-3 eV^2, snthetabar=1.0. A fit to the two-flavor oscillation approximation constrains |dm2bar|<3.37x10^-3 eV^2 at the 90% confidence level with snthetabar=1.0
Cadmium isotope fractionation in soil-cacao systems of Ecuador: a pilot field study
The often high Cd concentrations of cacao beans are a serious concern for producers in Latin America due to the implementation of stricter Cd limits for cocoa products by the European Union in 2019. This is the first investigation to employ coupled Cd isotope and concentration measurements to study soil – cacao systems. Analyses were carried out for 29 samples of soils, soil amendments and cacao tree organs from organic farms in Ecuador that harvest three distinct cacao cultivars. The majority of soils from 0–80 cm depth have very similar δ114/110Cd of about −0.1‰ to 0‰. Two 0–5 cm topsoils, however, have high Cd concentrations coupled with heavy Cd isotope compositions of δ114/110Cd ≈ 0.2%, possibly indicating Cd additions from the tree litter used as organic fertilizer. Whilst cacao leaves, pods and beans are ubiquitously enriched in Cd relative to soils there are distinct Cd isotope signatures. The leaves and pods are isotopically heavier than the soils, with similar Δ114/110Cdleaf–soil values of 0.22 ± 0.07‰ to 0.41 ± 0.09‰. In contrast, the data reveal differences in Δ114/110Cdbean–leaf that may be linked to distinct cacao cultivars. In detail, Δ114/110Cdbean–leaf values of −0.34‰ to −0.40‰ were obtained for Nacional cacao from two farms, whilst CCN-51 hybrid cacao from a third farm showed no fractionation within error (−0.08 ± 0.13‰). As such, further work to investigate whether Cd isotopes are indeed useful for tracing sources of Cd enrichments in soils and to inform genetic efforts to reduce the Cd burden of cocoa is indicated
Toward energy harvesting using active materials and conversion improvement by nonlinear processing
The relationship between auroral hiss at high altitudes over the polar caps and the substorm dynamics of aurora
Strong variations of intensity and cutoff frequency of the auroral hiss were observed by INTERBALL-2 and POLAR satellites at high altitudes, poleward from the auroral oval. The hiss intensifications are correlated with the auroral activations during substorms and/or pseudo-breakups. The low cutoff frequency of auroral hiss increases with the distance between the aurora and the satellite footprint. Multicomponent wave measurements of the hiss emissions on board the POLAR spacecraft show that the horizontal component of the Poynting flux of auroral hiss changes its direction in good accordance with longitudinal displacements of the bright auroras. The vertical component of the Poynting flux is directed upward from the aurora region, indicating that hiss could be generated by upgoing electron beams. This relationship between hiss and the aurora dynamics means that the upgoing electron beams are closely related to downgoing electron beams which produce the aurora. During the auroral activations the upgoing and downgoing beams move and change their intensities simultaneously.<br><br> <b>Keywords.</b> Magnetospheric physics (Auroral phenomena; Plasma waves and instabilities; Storms and substorms
Characterization Of Epoxy-Coated Oxide Films Using Acoustic Microscopy
An adhesive joint consisting of aluminum adherends bonded with an epoxy adhesive is composed of three main layers. The adherends are usually a few millimeters thick with a layer of epoxy adhesive between one and three hundred microns thick between them. The surfaces of the adherends are typically pre-treated to produce a thin film of porous aluminum oxide, which has a honeycomb-like structure. The epoxy adhesive may then penetrate into these honeycomb cells or pores. The resulting layer between the adhesive and adherend is therefore a micro-composite and it is typically of the order of one micron in thickness. The use of the surface pre-treatment is a major factor in increasing the durability of the adhesive joint when it is exposed to water. Additionally, joints which have been in use for some time, especially ones which have been subject to environmental attack, usually experience a failure along the plane of this film. Therefore, characterization of this epoxy/oxide interlayer is very important in understanding adhesive joints and how they are affected by environmental factors. Unfortunately, not much is known about their mechanical properties
- …