Broadening the bandwidth of entangled photons: a step towards the generation of extremely short biphotons

We demonstrate a technique that allows to fully control the bandwidth of entangled photons independently of the frequency band of interest and of the nonlinear crystal. We show that this technique allows to generate nearly transform-limited biphotons with almost one octave of bandwidth (hundreds of THz) which corresponds to correlation times of just a few femtoseconds. The presented method becomes an enabling tool for attosecond entangled-photons quantum optics. The technique can also be used to generate paired photons with a very high degree of entanglement.Comment: 4 page

Timing performance of 30-nm-wide superconducting nanowire avalanche photodetectors

We investigated the timing jitter of superconducting nanowire avalanche photodetectors (SNAPs, also referred to as cascade switching superconducting single photon detectors) based on 30-nm-wide nanowires. At bias currents (IB) near the switching current, SNAPs showed sub 35 ps FWHM Gaussian jitter similar to standard 100 nm wide superconducting nanowire single-photon detectors. At lower values of IB, the instrument response function (IRF) of the detectors became wider, more asymmetric, and shifted to longer time delays. We could reproduce the experimentally observed IRF time-shift in simulations based on an electrothermal model, and explain the effect with a simple physical picture

Ultraslow propagation of matched pulses by four-wave mixing in an atomic vapor

We have observed the ultraslow propagation of matched pulses in nondegenerate four-wave mixing in a hot atomic vapor. Probe pulses as short as 70 ns can be delayed by a tunable time of up to 40 ns with little broadening or distortion. During the propagation, a probe pulse is amplified and generates a conjugate pulse which is faster and separates from the probe pulse before getting locked to it at a fixed delay. The precise timing of this process allows us to determine the key coefficients of the susceptibility tensor. The presence of gain in this system makes this system very interesting in the context of all-optical information processing.Comment: 5 pages, 4 figure

Afterpulsing and instability in superconducting nanowire avalanche photodetectors

We investigated the reset time of superconducting nanowire avalanche photodetectors (SNAPs) based on 30 nm wide nanowires. We studied the dependence of the reset time of SNAPs on the device inductance and discovered that SNAPs can provide a speed-up relative to superconducting nanowire single-photon detectors with the same area but with some limitations: (1) Reducing the series inductance of SNAPs (necessary for the avalanche formation) could result in the detectors operating in an unstable regime, (2) a trade-off exists between maximizing the bias current margin and minimizing the reset time of SNAPs, and (3) reducing the reset time of SNAPs below ∼1 ns resulted in afterpulsing.United States. Intelligence Advanced Research Projects ActivityUnited States. Air Force (Air Force Contract No. FA8721-05-C-0002)United States. Dept. of Energy. Center for Excitonics (Award No. DE-SC0001088

Kinetic-inductance-limited reset time of superconducting nanowire photon counters

We investigate the recovery of superconducting NbN-nanowire photon counters after detection of an optical pulse at a wavelength of 1550 nm, and present a model that quantitatively accounts for our observations. The reset time is found to be limited by the large kinetic inductance of these nanowires, which forces a tradeoff between counting rate and either detection efficiency or active area. Devices of usable size and high detection efficiency are found to have reset times orders of magnitude longer than their intrinsic photoresponse time.Comment: Submitted to Applied Physics Letter

Conveyor belt clock synchronization

A protocol for synchronizing distant clocks is proposed that does not rely on the arrival times of the signals which are exchanged, and an optical implementation based on coherent-state pulses is described. This protocol is not limited by any dispersion that may be present in the propagation medium through which the light signals are exchanged. Possible improvements deriving from the use of quantum-mechanical effects are also addressed.Comment: 8 pages, 7 figure

Large-area NbN superconducting nanowire avalanche photon detectors with saturated detection efficiency

Superconducting circuits comprising SNSPDs placed in parallel—superconducting nanowire avalanche photodetectors, or SNAPs—have previously been demonstrated to improve the output signal-to-noise ratio (SNR) by increasing the critical current. In this work, we employ a 2-SNAP superconducting circuit with narrow (40 nm) niobium nitride (NbN) nanowires to improve the system detection efficiency to near-IR photons while maintaining high SNR. Additionally, while previous 2-SNAP demonstrations have added external choke inductance to stabilize the avalanching photocurrent, we show that the external inductance can be entirely folded into the active area by cascading 2-SNAP devices in series to produce a greatly increased active area. We fabricated series-2-SNAP (s2-SNAP) circuits with a nanowire length of 20 μm with cascades of 2-SNAPs providing the choke inductance necessary for SNAP operation. We observed that (1) the detection efficiency saturated at high bias currents, and (2) the 40 nm 2-SNAP circuit critical current was approximately twice that for a 40 nm non-SNAP configuration.United States. Dept. of Defense. Assistant Secretary of Defense for Research & Engineering (United States. Air Force Contract FA8721-05-C-0002

Heralding efficiency and correlated-mode coupling of near-IR fiber-coupled photon pairs

We report on a systematic experimental study of the heralding efficiency and generation rate of telecom-band infrared photon pairs generated by spontaneous parametric down-conversion and coupled to single-mode optical fibers. We define the correlated-mode coupling efficiency, an inherent source efficiency, and explain its relation to heralding efficiency. For our experiment, we developed a reconfigurable computer-controlled pump-beam and collection-mode optical apparatus which we used to measure the generation rate and correlated-mode coupling efficiency. The use of low-noise, high-efficiency superconducting nanowire single-photon detectors in this setup allowed us to explore focus configurations with low overall photon flux. The measured data agree well with theory, and we demonstrated a correlated-mode coupling efficiency of 97% ± 2%, which is the highest efficiency yet achieved for this type of system. These results confirm theoretical treatments and demonstrate that very high overall heralding efficiencies can, in principle, be achieved in quantum optical systems. It is expected that these results and techniques will be widely incorporated into future systems that require, or benefit from, a high heralding efficiency.United States. Dept. of Defense. Assistant Secretary of Defense for Research & Engineering (Air Force Contract FA8721-05-C-0002

Superconducting nanowire photon number resolving detector at telecom wavelength

The optical-to-electrical conversion, which is the basis of optical detectors, can be linear or nonlinear. When high sensitivities are needed single-photon detectors (SPDs) are used, which operate in a strongly nonlinear mode, their response being independent of the photon number. Nevertheless, photon-number resolving (PNR) detectors are needed, particularly in quantum optics, where n-photon states are routinely produced. In quantum communication, the PNR functionality is key to many protocols for establishing, swapping and measuring entanglement, and can be used to detect photon-number-splitting attacks. A linear detector with single-photon sensitivity can also be used for measuring a temporal waveform at extremely low light levels, e.g. in long-distance optical communications, fluorescence spectroscopy, optical time-domain reflectometry. We demonstrate here a PNR detector based on parallel superconducting nanowires and capable of counting up to 4 photons at telecommunication wavelengths, with ultralow dark count rate and high counting frequency

Tomography and state reconstruction with superconducting single-photon detectors

We perform quantum state reconstruction of coherent and thermal states with a detector which has an enhanced multiphoton response. The detector is based on superconducting nanowires, where the bias current sets the dependence of the click probability on the photon number; this bias current is used as tuning parameter in the state reconstruction. The nonlinear response makes our nanowire-based detector superior to the linear detectors that are conventionally used for quantum state reconstruction.Comment: revision of intro compared to V