406 research outputs found
Comparative Evaluation of Data-Driven Approaches to Develop an Engine Surrogate Model for NOx Engine-Out Emissions under Steady-State and Transient Conditions
In this paper, a methodology based on data-driven models is developed to predict the NOx emissions of an internal combustion engine using, as inputs, a set of ECU channels representing the main engine actuations. Several regressors derived from the machine learning and deep learning algorithms are tested and compared in terms of prediction accuracy and computational efficiency to assess the most suitable for the aim of this work. Six Real Driving Emission (RDE) cycles performed at the roll bench were used for the model training, while another two RDE cycles and a steady-state map of NOx emissions were used to test the model under dynamic and stationary conditions, respectively. The models considered include Polynomial Regressor (PR), Support Vector Regressor (SVR), Random Forest Regressor (RF), Light Gradient Boosting Regressor (LightGBR) and Feed-Forward Neural Network (ANN). Ensemble methods such as Random Forest and LightGBR proved to have similar performances in terms of prediction accuracy, with LightGBR requiring a much lower training time. Afterwards, LightGBR predictions are compared with experimental NOx measurements in steady-state conditions and during two RDE cycles. Coefficient of determination (R2), normalized root mean squared error (nRMSE) and mean average percentage error (MAPE) are the main metrics used. The NOx emissions predicted by the LightGBR show good coherence with the experimental test set, both with the steady-state NOx map (R2 = 0.91 and MAPE = 6.42%) and with the RDE cycles (R2 = 0.95 and nRMSE = 0.04)
automotive turbochargers power estimation based on speed fluctuation analysis
Turbocharging technology will play a crucial role in the near future as a way to meet the requirements for pollutant emissions and fuel consumption reduction. However, optimal turbocharger control is still an issue, especially for downsized engines fitted with a low number of cylinders. As a matter of fact, automotive turbochargers are characterized by wide operating range and unsteady gas flow through the turbine, while only steady flow maps are usually provided by the manufacturer. In addition, in passenger cars applications, real-time turbocharger optimal control is even more difficult because of the lack of information about pressure/temperature in turbine upstream/downstream circuits and turbocharger rotational speed. In order to overcome these unknowns, this work presents a methodology for instantaneous turbocharger rotational speed determination through a proper processing of the signal coming from one accelerometer mounted on the compressor diffuser, or one microphone facing the compressor. The presented approach can be used to evaluate both turbocharger speed mean value and the amplitude of turbocharger speed fluctuations caused by the pulsating gas flow in turbine upstream and downstream circuits. Once turbocharger speed has been determined, it can be used to estimate power delivered by the turbine. The whole estimation algorithm has been developed and validated for a light duty turbocharged Common-Rail Diesel engine mounted in a test cell. However, the developed methodology is general and can be applied to different turbochargers, both for Spark Ignited and Diesel applications. © 2015 Published by Elsevier Ltd
Accelerometer-based SOC estimation methodology for combustion control applied to Gasoline Compression Ignition
The European Community's recent decision to suspend the marketing of cars with conventional fossil-fueled internal combustion engines from 2035 requires new solutions, based on carbon-neutral technologies, that ensure equivalent performances in terms of reliability, trip autonomy, refueling times and end-of-life disposal of components compared to those of current gasoline or diesel cars. The use of bio-fuels and hydrogen, which can be
obtained by renewable energy sources, coupled with high-efficiency combustion methodologies might allow to reach the carbon neutrality of transports (net-zero carbon dioxide emissions) even using the well-known internal combustion engine technology. Bearing this in mind, experiments were carried out on compression ignited engines running on gasoline (GCI) with a high thermal efficiency which, in the future, could be easily adapted to run on a
bio-fuel. Despite the well-reported benefits of GCI engines in terms of efficiency and pollutant emissions, combustion instability hinders the diffusion of these engines for industrial applications. A possible solution to stabilize GCI combustion is the use of multiple injections strategies, typically composed by 2 early injected fuel jests followed by the main injection. The heat released by the combustion of the earlier fuel jets allows to reduce the ignition delay of the main injection, directly affecting both delivered torque and center of combustion. As a result,
to properly manage GCI engines, a stable and reliable combustion of the pre-injections is mandatory. In this paper, an estimation methodology of the start of combustion (SOC) position, based on the analysis of the signal coming from an accelerometer sensor mounted on the engine block, is presented (the optimal sensor positioning is also discussed). A strong correlation between the SOC calculated from the accelerometer and that obtained from the
analysis of the rate of heat release (RoHR) was identified. As a result, the estimated SOC could be used to feedback an adaptive closed-loop combustion control algorithm, suitable to improve the stability of the whole combustion process
automatic calibration of control parameters based on merit function spectral analysis
Abstract The number of actuations influencing the combustion is increasing, and, as a consequence, the calibration of control parameters is becoming challenging. One of the most effective factors influencing performance and efficiency is the combustion phasing: for gasoline engines control variables such as Spark Advance (SA), Air-to-Fuel Ratio (AFR), Variable Valve Timing (VVT), Exhaust Gas Recirculation (EGR) are mostly used to set the combustion phasing. The optimal control setting can be chosen according to a cost function, taking into account performance indicators, such as Indicated Mean Effective Pressure (IMEP), Brake Specific Fuel Consumption (BSFC), pollutant emissions, or other indexes inherent to reliability issues, such as exhaust gas temperature, or knock intensity. The paper proposes the use of the extremum seeking approach during the calibration process. The main idea consists in changing the values of each control parameter at the same time, identifying its effect on the monitored cost function, allowing to shift automatically the control setting towards the optimum solution throughout the calibration procedure. Obviously, the nodal point is to establish how the various control parameters affect the monitored cost function and to determine the direction of the required variation, in order to approach the optimum. This task is carried out by means of a spectral analysis of the cost function: each control variable is varied according to a sine wave, thus its effect on the cost function can be determined by evaluating the amplitude of the Fast Fourier Transform (FFT) of the cost function, for the given excitation frequency. The FFT amplitude is representative of the cost function sensitivity to the control variable variations, while the phase can be used to assess the direction of the variation that must be applied to the control settings in order to approach the optimum configuration. Each control parameter is excited with a different frequency, thus it is possible to recognize the effect of a single parameter by analyzing the spectrum of the cost function for the given excitation frequency. The methodology has been applied to data referring to a PFI engine, trying to maximize IMEP, while limiting the knock intensity and exhaust gas temperature, using SA and AFR as control variables. The approach proved to be efficient in reaching the optimum control setting, showing that the optimal setting can be achieved rapidly and consistently
Analysis of epidermal growth factor receptor expression as a predictive factor for response to gefitinib (‘Iressa’, ZD1839) in non-small-cell lung cancer
Gefitinib ('Iressa', ZD1839) is an orally active epidermal growth factor receptor (EGFR) tyrosine kinase inhibitor that has demonstrated antitumour activity and favourable tolerability in Phase II studies. We investigated whether EGFR expression levels could predict for response to gefitinib in patients with advanced non-small-cell lung cancer (NSCLC), who received gefitinib (250 mg day(-1)) as part of a worldwide compassionate-use programme. Tissue samples were analysed by immunohistochemistry to assess membrane EGFR immunoreactivity. Of 147 patients enrolled in our institution, 50 patients were evaluable for assessment of both clinical response and EGFR expression. The objective tumour response rate was 10% and disease control was achieved in 50% of patients. Although high EGFR expression was more common in squamous-cell carcinomas than adenocarcinomas, all objective responses were observed in patients with adenocarcinoma. Response and disease control with gefitinib were not associated with high EGFR expression. Overall, median survival was 4 months, and the 1-year survival rate was 18%. Strong EGFR staining correlated with shorter survival time for all patients. Gefitinib demonstrated promising clinical activity in this group of patients with NSCLC. These results have also shown that EGFR expression is not a significant predictive factor for response to gefitinib
The cognitive neuroscience of prehension: recent developments
Prehension, the capacity to reach and grasp, is the key behavior that allows humans to change their environment. It continues to serve as a remarkable experimental test case for probing the cognitive architecture of goal-oriented action. This review focuses on recent experimental evidence that enhances or modifies how we might conceptualize the neural substrates of prehension. Emphasis is placed on studies that consider how precision grasps are selected and transformed into motor commands. Then, the mechanisms that extract action relevant information from vision and touch are considered. These include consideration of how parallel perceptual networks within parietal cortex, along with the ventral stream, are connected and share information to achieve common motor goals. On-line control of grasping action is discussed within a state estimation framework. The review ends with a consideration about how prehension fits within larger action repertoires that solve more complex goals and the possible cortical architectures needed to organize these actions
The effects of visual control and distance in modulating peripersonal spatial representation
In the presence of vision, finalized motor acts can trigger spatial remapping, i.e., reference frames transformations to allow for a better interaction with targets. However, it is yet unclear how the peripersonal space is encoded and remapped depending on the availability of visual feedback and on the target position within the individual’s reachable space, and which cerebral areas subserve such processes. Here, functional magnetic resonance imaging (fMRI) was used to examine neural activity while healthy young participants performed reach-to-grasp movements with and without visual feedback and at different distances of the target from the effector (near to the hand–about 15 cm from the starting position–vs. far from the hand–about 30 cm from the starting position). Brain response in the superior parietal lobule bilaterally, in the right dorsal premotor cortex, and in the anterior part of the right inferior parietal lobule was significantly greater during visually-guided grasping of targets located at the far distance compared to grasping of targets located near to the hand. In the absence of visual feedback, the inferior parietal lobule exhibited a greater activity during grasping of targets at the near compared to the far distance. Results suggest that in the presence of visual feedback, a visuo-motor circuit integrates visuo-motor information when targets are located farther away. Conversely in the absence of visual feedback, encoding of space may demand multisensory remapping processes, even in the case of more proximal targets
Fix Your Eyes in the Space You Could Reach: Neurons in the Macaque Medial Parietal Cortex Prefer Gaze Positions in Peripersonal Space
Interacting in the peripersonal space requires coordinated arm and eye movements to visual targets in depth. In primates, the medial posterior parietal cortex (PPC) represents a crucial node in the process of visual-to-motor signal transformations. The medial PPC area V6A is a key region engaged in the control of these processes because it jointly processes visual information, eye position and arm movement related signals. However, to date, there is no evidence in the medial PPC of spatial encoding in three dimensions. Here, using single neuron recordings in behaving macaques, we studied the neural signals related to binocular eye position in a task that required the monkeys to perform saccades and fixate targets at different locations in peripersonal and extrapersonal space. A significant proportion of neurons were modulated by both gaze direction and depth, i.e., by the location of the foveated target in 3D space. The population activity of these neurons displayed a strong preference for peripersonal space in a time interval around the saccade that preceded fixation and during fixation as well. This preference for targets within reaching distance during both target capturing and fixation suggests that binocular eye position signals are implemented functionally in V6A to support its role in reaching and grasping
Bringing the real world into the fMRI scanner: Repetition effects for pictures versus real objects
Our understanding of the neural underpinnings of perception is largely built upon studies employing 2-dimensional (2D) planar images. Here we used slow event-related functional imaging in humans to examine whether neural populations show a characteristic repetition-related change in haemodynamic response for real-world 3-dimensional (3D) objects, an effect commonly observed using 2D images. As expected, trials involving 2D pictures of objects produced robust repetition effects within classic object-selective cortical regions along the ventral and dorsal visual processing streams. Surprisingly, however, repetition effects were weak, if not absent on trials involving the 3D objects. These results suggest that the neural mechanisms involved in processing real objects may therefore be distinct from those that arise when we encounter a 2D representation of the same items. These preliminary results suggest the need for further research with ecologically valid stimuli in other imaging designs to broaden our understanding of the neural mechanisms underlying human vision
- …