610 research outputs found
Experiments in a three-dimensional adaptive-wall wind tunnel
Three dimensional adaptive-wall experiments were performed in the Ames Research Center (ARC) 25- by 13-cm indraft wind tunnel. A semispan wing model was mounted to one sidewall of a test section with solid sidewalls, and slotted top and bottom walls. The test section had separate top and bottom plenums which were divided into streamwise and cross-stream compartments. An iterative procedure was demonstrated for measuring wall interference and for adjusting the plenum compartment pressures to eliminate such interference. The experiments were conducted at a freestream Mach number of 0.60 and model angles of attack between 0 and 6 deg. Although in all the experiments wall interference was reduced after the plenum pressures were adjusted, interference could not be completely eliminated
Analysis of turbofan propulsion system weight and dimensions
Weight and dimensional relationships that are used in aircraft preliminary design studies are analyzed. These relationships are relatively simple to prove useful to the preliminary designer, but they are sufficiently detailed to provide meaningful design tradeoffs. All weight and dimensional relationships are developed from data bases of existing and conceptual turbofan engines. The total propulsion system is considered including both engine and nacelle, and all estimating relations stem from physical principles, not statistical correlations
Adaptive-wall wind-tunnel research at NASA-Ames Research Center
Adaptive wall wind tunnel research is summarized. Small scale two and three dimensional wind tunnel experiments and numerical experiments with a three dimensional adaptive wall simulator are included. A NACA 0012 airfoil was tested in a 25 by 13 cm slotted wall test section. Airflow through the test section walls was controlled by adjusting the pressures in segmented plenums. Interference free conditions were successfully attained in subsonic and transonic flows. For the three dimensional experiment, the 25 by 13 cm wind tunnel was modified to permit cross stream wall adjustments. The test model was a semispan wing mounted to one sidewall. Wall interference was substantially reduced at several angles of attack at Mach 0.60. A wing on wall configuration was also modeled in the numerical experiments. These flow simulations showed that free air conditions can be approximated by adjusting boundary conditions at only the floor and ceiling of the test section. No sidewall control was necessary. Typical results from these experiments are discussed
Recommended from our members
A typology of community and stakeholder engagement based on documented examples in the field of novel vector control.
BackgroundDespite broad consensus on the importance of community and stakeholder engagement (CSE) for guiding the development, regulation, field testing, and deployment of emerging vector control technologies (such as genetically engineered insects), the types of activities pursued have varied widely, as have the outcomes. We looked to previous CSE efforts for clarity about appropriate methods and goals. Our analysis yielded a typology of CSE, and related vocabulary, that describes distinctions that funders, organizers, and scholars should make when proposing or evaluating CSE.MethodsWe compiled available formal documentation of CSE projects, starting with projects mentioned in interviews with 17 key informants. Major features of these examples, including the initiators, target groups, timing, goals, and methods were identified using qualitative coding. Based on these examples, subcategories were developed for a subset of features and applied to the identified cases of CSE in the documents. Co-occurrence of subcategorized features was examined for patterns.ResultsWe identified 14 documented examples CSE projects, which were comprised of 28 distinct CSE activities. We found no clear patterns with respect to timing. However, we found that grouping examples according to whether initiators or targets could enact the immediate desired outcome could help to clarify relationships between goals, methods, and targets.ConclusionBased on this analysis, we propose a typology that distinguishes three categories of CSE: engagement to inquire -where initiators are empowered to act on information collected through engagement with target groups; engagement to influence -where initiators engage to affect the actions of already-empowered target groups; and engagement to involve -where initiators engage to delegate authority to target groups. The proposed typology can serve as a guide for establishing the goals, identifying appropriate methods, and evaluating and reporting CSE projects by directing attention to important questions to be asked well before determining who to engage and how
Methods for assessing wall interference in the 2- by 2-foot adaptive-wall wind tunnel
Discussed are two methods for assessing two-dimensional wall interference in the adaptive-wall test section of the NASA Ames 2 x 2-Foot Transonic Wind Tunnel: (1) a method for predicting free-air conditions near the walls of the test section (adaptive-wall methods); and (2) a method for estimating wall-induced velocities near the model (correction methods), both of which methods are based on measurements of either one or two components of flow velocity near the walls of the test section. Each method is demonstrated using simulated wind tunnel data and is compared with other methods of the same type. The two-component adaptive-wall and correction methods were found to be preferable to the corresponding one-component methods because: (1) they are more sensitive to, and give a more complete description of, wall interference; (2) they require measurements at fewer locations; (3) they can be used to establish free-stream conditions; and (4) they are independent of a description of the model and constants of integration
Effects of upper surface modification on the aerodynamic characteristics of the NACA 63 sub 2-215 airfoil section
An upper surface modification designed to increase the maximum lift coefficient of a 63 sub 2 - 215 airfoil section was tested at Mach numbers of 0.2, 0.3, and 0.4 Reynolds numbers of 1.3 x 1 million, 2 x 10 sub 6 and 2.5 x 1 million. Comparisons of the aerodynamic coefficients before and after the modification were made. The upper surface modification increased the maximum lift coefficient of the airfoil significantly at all conditions
Recommended from our members
Disposition toward privacy and information disclosure in the context of emerging health technologies.
ObjectiveWe sought to present a model of privacy disposition and its development based on qualitative research on privacy considerations in the context of emerging health technologies.Materials and methodsWe spoke to 108 participants across 44 interviews and 9 focus groups to understand the range of ways in which individuals value (or do not value) control over their health information. Transcripts of interviews and focus groups were systematically coded and analyzed in ATLAS.ti for privacy considerations expressed by respondents.ResultsThree key findings from the qualitative data suggest a model of privacy disposition. First, participants described privacy related behavior as both contextual and habitual. Second, there are motivations for and deterrents to sharing personal information that do not fit into the analytical categories of risks and benefits. Third, philosophies of privacy, often described as attitudes toward privacy, should be classified as a subtype of motivation or deterrent.DiscussionThis qualitative analysis suggests a simple but potentially powerful conceptual model of privacy disposition, or what makes a person more or less private. Components of privacy disposition are identifiable and measurable through self-report and therefore amenable to operationalization and further quantitative inquiry.ConclusionsWe propose this model as the basis for a psychometric instrument that can be used to identify types of privacy dispositions, with potential applications in research, clinical practice, system design, and policy
CARD14 gain-of-function mutation alone is sufficient to drive IL-23/IL-17-mediated psoriasiform skin inflammation in vivo
Rare autosomal dominant mutations in the gene encoding the keratinocyte signaling molecule, Caspase Recruitment Domain-Containing Protein 14 (CARD14), have been associated with an increased susceptibility to psoriasis but the physiological impact of CARD14 gain-of-function mutations remains to be fully determined in vivo. Here, we report that heterozygous mice harboring a CARD14 gain-of-function mutation (Card14ΔE138) spontaneously develop a chronic psoriatic phenotype with characteristic scaling skin lesions, epidermal thickening, keratinocyte hyperproliferation, hyperkeratosis and immune cell infiltration. Affected skin of these mice is characterized by elevated expression of anti-microbial peptides, chemokines and cytokines (including Th17 cell-signature cytokines), and an immune infiltrate rich in neutrophils, myeloid cells and T-cells, reminiscent of human psoriatic skin. Disease pathogenesis was driven by the IL-23/IL-17 axis and neutralization of IL-23p19, the key cytokine in maintaining Th17 cell polarization, significantly reduced skin lesions and the expression of antimicrobial peptides and pro-inflammatory cytokines. Therefore, hyperactivation of CARD14 alone is sufficient to orchestrate the complex immunopathogenesis that drives Th17-mediated psoriasis skin disease in vivo
Implementing Neural Network-Based Equalizers in a Coherent Optical Transmission System Using Field-Programmable Gate Arrays
In this work, we demonstrate the offline FPGA realization of both recurrent
and feedforward neural network (NN)-based equalizers for nonlinearity
compensation in coherent optical transmission systems. First, we present a
realization pipeline showing the conversion of the models from Python libraries
to the FPGA chip synthesis and implementation. Then, we review the main
alternatives for the hardware implementation of nonlinear activation functions.
The main results are divided into three parts: a performance comparison, an
analysis of how activation functions are implemented, and a report on the
complexity of the hardware. The performance in Q-factor is presented for the
cases of bidirectional long-short-term memory coupled with convolutional NN
(biLSTM + CNN) equalizer, CNN equalizer, and standard 1-StpS digital
back-propagation (DBP) for the simulation and experiment propagation of a
single channel dual-polarization (SC-DP) 16QAM at 34 GBd along 17x70km of LEAF.
The biLSTM+CNN equalizer provides a similar result to DBP and a 1.7 dB Q-factor
gain compared with the chromatic dispersion compensation baseline in the
experimental dataset. After that, we assess the Q-factor and the impact of
hardware utilization when approximating the activation functions of NN using
Taylor series, piecewise linear, and look-up table (LUT) approximations. We
also show how to mitigate the approximation errors with extra training and
provide some insights into possible gradient problems in the LUT approximation.
Finally, to evaluate the complexity of hardware implementation to achieve 400G
throughput, fixed-point NN-based equalizers with approximated activation
functions are developed and implemented in an FPGA.Comment: Invited paper at Journal of Lightwave Technology - IEE
- …