587 research outputs found
First electron beam polarization measurements with a Compton polarimeter at Jefferson Laboratory
A Compton polarimeter has been installed in Hall A at Jefferson Laboratory.
This letter reports on the first electron beam polarization measurements
performed during the HAPPEX experiment at an electron energy of 3.3 GeV and an
average current of 40 A. The heart of this device is a Fabry-Perot cavity
which increased the luminosity for Compton scattering in the interaction region
so much that a 1.4% statistical accuracy could be obtained within one hour,
with a 3.3% total error
New pixelized Micromegas detector for the COMPASS experiment
New Micromegas (Micro-mesh gaseous detectors) are being developed in view of
the future physics projects planned by the COMPASS collaboration at CERN.
Several major upgrades compared to present detectors are being studied:
detectors standing five times higher luminosity with hadron beams, detection of
beam particles (flux up to a few hundred of kHz/mm^2, 10 times larger than for
the present detectors) with pixelized read-out in the central part, light and
integrated electronics, and improved robustness. Studies were done with the
present detectors moved in the beam, and two first pixelized prototypes are
being tested with muon and hadron beams in real conditions at COMPASS. We
present here this new project and report on two series of tests, with old
detectors moved into the beam and with pixelized prototypes operated in real
data taking condition with both muon and hadron beams.Comment: 11 pages, 5 figures, proceedings to the Micro-Pattern Gaseous
Detectors conference (MPGD2009), 12-15 June 2009, Kolympari, Crete, Greece
Minor details added and language corrections don
A photon calorimeter using lead tungstate crystals for the CEBAF Hall A Compton polarimeter
The performances of the calorimeter of the Jlab Hall A Compton Polarimeter
have been measured using the Mainz tagged photon beam.Comment: 13 page
New pixelized Micromegas detector with low discharge rate for the COMPASS experiment
New Micromegas (Micro-mesh gaseous detectors) are being developed in view of
the future physics projects planned by the COMPASS collaboration at CERN.
Several major upgrades compared to present detectors are being studied:
detectors standing five times higher luminosity with hadron beams, detection of
beam particles (flux up to a few hundred of kHz/mm^{2}, 10 times larger than
for the present Micromegas detectors) with pixelized read-out in the central
part, light and integrated electronics, and improved robustness. Two solutions
of reduction of discharge impact have been studied, with Micromegas detectors
using resistive layers and using an additional GEM foil. Performance of such
detectors has also been measured. A large size prototypes with nominal active
area and pixelized read-out has been produced and installed at COMPASS in 2010.
In 2011 prototypes featuring an additional GEM foil, as well as an resistive
prototype, are installed at COMPASS and preliminary results from those
detectors presented very good performance. We present here the project and
report on its status, in particular the performance of large size prototypes
with an additional GEM foil.Comment: 11 pages, 5 figures, proceedings to the Micro-Pattern Gaseous
Detectors conference (MPGD2011), 29-31 August 2011, Kobe, Japa
Fast readout of the COMPASS RICH CsI-MWPC photon chambers
Abstract A new readout system for CsI-coated MWPCs, used in the COMPASS RICH detector, has been proposed and tested in nominal high-rate conditions. It is based on the APV25-S1 analog sampling chip, and will replace the Gassiplex chip readout used up to now. The APV chip, originally designed for silicon microstrip detectors, is shown to perform well even with "slow" signals from a MWPC, keeping a signal-to-noise ratio of 9. For every trigger the system reads three consecutive in-time samples, thus allowing to extract information on the signal shape and its timing. The effective time window is reduced from ∼3 μs for the Gassiplex to below 400 ns for the APV25-S1 chip, reducing pile-up events at high particle rate. A significant improvement of the signal-to-background ratio by a factor 5–6 with respect to the original readout has been measured in the central region of the RICH detector. Due to its pipelined architecture, the new readout system also considerably reduces the dead time per event, allowing efficient data taking at higher trigger rate
Precision Measurement of the Neutron Spin Asymmetry and Spin-Flavor Decomposition in the Valence Quark Region
We have measured the neutron spin asymmetry with high precision at
three kinematics in the deep inelastic region at , 0.47 and 0.60, and
, 3.5 and 4.8 (GeV/c), respectively. Our results unambiguously
show, for the first time, that crosses zero around and becomes
significantly positive at . Combined with the world proton data,
polarized quark distributions were extracted. Our results, in general, agree
with relativistic constituent quark models and with perturbative quantum
chromodynamics (pQCD) analyses based on the earlier data. However they deviate
from pQCD predictions based on hadron helicity conservation.Comment: 5 pages, 2 figures, this is the final version appeared in Phys. Rev.
Let
Parity-Violating Electron Scattering from 4He and the Strange Electric Form Factor of the Nucleon
We have measured the parity-violating electroweak asymmetry in the elastic
scattering of polarized electrons from ^4He at an average scattering angle
= 5.7 degrees and a four-momentum transfer Q^2 = 0.091 GeV^2. From
these data, for the first time, the strange electric form factor of the nucleon
G^s_E can be isolated. The measured asymmetry of A_PV = (6.72 +/- 0.84 (stat)
+/- 0.21 (syst) parts per million yields a value of G^s_E = -0.038 +/- 0.042
(stat) +/- 0.010 (syst), consistent with zero
A FABRY-PEROT CAVITY FOR COMPTON POLARIMETRY
A new kind of Compton polarimeter using a resonant Fabry—Pe« rot cavity as a power buildup for the photon beam is proposed. A prototype of such a cavity is described, along with the results obtained in terms of source to be used in a Compton scattering polarimeter. ( 1998 Elsevier Science B.V. All rights reserved
Recoil Polarization Measurements for Neutral Pion Electroproduction at Q^2=1 (GeV/c)^2 Near the Delta Resonance
We measured angular distributions of differential cross section, beam
analyzing power, and recoil polarization for neutral pion electroproduction at
Q^2 = 1.0 (GeV/c)^2 in 10 bins of W across the Delta resonance. A total of 16
independent response functions were extracted, of which 12 were observed for
the first time. Comparisons with recent model calculations show that response
functions governed by real parts of interference products are determined
relatively well near 1.232 GeV, but variations among models is large for
response functions governed by imaginary parts and for both increases rapidly
with W. We performed a nearly model-independent multipole analysis that adjusts
complex multipoles with high partial waves constrained by baseline models.
Parabolic fits to the W dependence of the multipole analysis around the Delta
mass gives values for SMR = (-6.61 +/- 0.18)% and EMR = (-2.87 +/- 0.19)% that
are distinctly larger than those from Legendre analysis of the same data.
Similarly, the multipole analysis gives Re(S0+/M1+) = (+7.1 +/- 0.8)% at
W=1.232 GeV, consistent with recent models, while the traditional Legendre
analysis gives the opposite sign because its truncation errors are quite
severe. Finally, using a unitary isobar model (UIM), we find that excitation of
the Roper resonance is dominantly longitudinal with S1/2 = (0.05 +/- 0.01)
GeV^(-1/2) at Q^2=1. The ReS0+ and ReE0+ multipoles favor pseudovector coupling
over pseudoscalar coupling or a recently proposed mixed-coupling scheme, but
the UIM does not reproduce the imaginary parts of 0+ multipoles well.Comment: 60 pages, 54 figure
- …