A generalized memory test algorithm

A general algorithm for testing digital computer memory is presented. The test checks that (1) every bit can be cleared and set in each memory work, and (2) bits are not erroneously cleared and/or set elsewhere in memory at the same time. The algorithm can be applied to any size memory block and any size memory word. It is concise and efficient, requiring the very few cycles through memory. For example, a test of 16-bit-word-size memory requries only 384 cycles through memory. Approximately 15 seconds were required to test a 32K block of such memory, using a microcomputer having a cycle time of 133 nanoseconds

Design of a high-speed digital processing element for parallel simulation

A prototype of a custom designed computer to be used as a processing element in a multiprocessor based jet engine simulator is described. The purpose of the custom design was to give the computer the speed and versatility required to simulate a jet engine in real time. Real time simulations are needed for closed loop testing of digital electronic engine controls. The prototype computer has a microcycle time of 133 nanoseconds. This speed was achieved by: prefetching the next instruction while the current one is executing, transporting data using high speed data busses, and using state of the art components such as a very large scale integration (VLSI) multiplier. Included are discussions of processing element requirements, design philosophy, the architecture of the custom designed processing element, the comprehensive instruction set, the diagnostic support software, and the development status of the custom design

Frequency response of an axial-flow compressor exposed to inlet pressure perturbations

Experimental results of a series of engine tests designed to obtain the stage dynamics of an eight-stage axial-flow compressor over the frequency range of 0.5 to 200 hertz are presented. The total pressure at the compressor face was varied by means of a secondary air jet system installed in the engine inlet and positioned to oppose the primary airflow. Total-pressure probes located at each compressor stage were used to obtain the frequency response of each compressor-stage total pressure to the average compressor-inlet total pressure. The engine operating conditions were chosen to illustrate the effects of changing the rotor speed, changing the exhaust nozzle area, and isolating the compressor discharge pressure perturbations from the fuel control and hence, the fuel flow

Application of integration algorithms in a parallel processing environment for the simulation of jet engines

The application of Predictor corrector integration algorithms developed for the digital parallel processing environment are investigated. The algorithms are implemented and evaluated through the use of a software simulator which provides an approximate representation of the parallel processing hardware. Test cases which focus on the use of the algorithms are presented and a specific application using a linear model of a turbofan engine is considered. Results are presented showing the effects of integration step size and the number of processors on simulation accuracy. Real time performance, interprocessor communication, and algorithm startup are also discussed

An automated procedure for calculating system matrices from perturbation data generated by an EAI Pacer and 100 hybrid computer system

Techniques are presented for determining the elements of the A, B, C, and D state variable matrices for systems simulated on an EAI Pacer 100 hybrid computer. An automated procedure systematically generates disturbance data necessary to linearize the simulation model and stores these data on a floppy disk. A separate digital program verifies this data, calculates the elements of the system matrices, and prints these matrices appropriately labeled. The partial derivatives forming the elements of the state variable matrices are approximated by finite difference calculations

Performance of a J85-13 compressor with clean and distorted inlet flow

The results presented are of a series of experimental tests in which a J85-13 turbojet engine was subjected to both distorted and undistorted inlet total pressure conditions. A distinctive feature of the data base obtained is that it includes compressor interstage information not previously recorded for a J85-13 engine. Each of the eight compressor stages was instrumented to obtain the characteristics of the individual stages for undistorted inlet conditions, and these data are documented in the report along with the undistorted compressor overall performance. Also included in the report is the overall performance of the compressor exposed to 14 different distorted-inlet conditions - 10 circumferential patterns and 4 radial patterns. The distortion patterns were introduced using screens that spoiled from 8 to 50 percent of the compressor face area; the distortion screen density, or the area blocked by the screen wire per unit area of screen, varied from 26 to 69 percent

Robust study design is as important on the social as it is on the ecological side of applied ecological research

1. The effective management of natural systems often requires resource users to change their behaviour. This has led to many applied ecologists using research tools developed by social scientists. This comes with challenges as ecologists often lack relevant disciplinary training. 2. Using an example from the current issue of Journal of Applied Ecology that investigated how conservation interventions influenced conservation outcomes, we discuss the challenges of conducting interdisciplinary science. We illustrate our points using examples from research investigating the role of law enforcement and outreach activities in limiting illegal poaching and the application of the theory of planned behaviour to conservation. 3. Synthesis and applications. Interdisciplinary research requires equal rigour to be applied to ecological and social aspects. Researchers with a natural science background need to access expertise and training in the principles of social science research design and methodology, in order to permit a more balanced interdisciplinary understanding of social–ecological system

Simulating a small turboshaft engine in real-time multiprocessor simulator (RTMPS) environment

A Real-Time Multiprocessor Simulator (RTMPS) has been developed at NASA Lewis Research Center. The RTMPS uses parallel microprocessors to achieve computing speeds needed for real-time engine simulation. This report describes the use of the RTMPS system to simulate a small turboshaft engine. The process of programming the engine equations and distributing them over one, two, and four processors is discussed. Steady-state and transient results from the RTMPS simulation are compared with results from a main-frame-based simulation. Processor execution times and the associated execution time savings for the two and four processor cases are presented using actual data obtained from the RTMPS system. Included is a discussion of why the minimum achievable calculation time for the turboshaft engine model was attained using four processors. Finally, future enhancements to the RTMPS system are discussed including the development of a generalized partitioning algorithm to automatically distribute the system equations among the processors in optimum fashion

Partitioning and packing mathematical simulation models for calculation on parallel computers

The development of multiprocessor simulations from a serial set of ordinary differential equations describing a physical system is described. Degrees of parallelism (i.e., coupling between the equations) and their impact on parallel processing are discussed. The problem of identifying computational parallelism within sets of closely coupled equations that require the exchange of current values of variables is described. A technique is presented for identifying this parallelism and for partitioning the equations for parallel solution on a multiprocessor. An algorithm which packs the equations into a minimum number of processors is also described. The results of the packing algorithm when applied to a turbojet engine model are presented in terms of processor utilization

A serological survey of ruminant livestock in Kazakhstan during post-Soviet transitions in farming and disease control

The results of a serological survey of livestock in Kazakhstan, carried out in 1997–1998, are reported. Serum samples from 958 animals (cattle, sheep and goats) were tested for antibodies to foot and mouth disease (FMD), bluetongue (BT), epizootic haemorrhagic disease (EHD), rinderpest (RP) and peste des petits ruminants (PPR) viruses, and to Brucella spp. We also investigated the vaccination status of livestock and related this to changes in veterinary provision since independence in 1991. For the 2 diseases under official surveillance (FMD and brucellosis) our results were similar to official data, although we found significantly higher brucellosis levels in 2 districts and widespread ignorance about FMD vaccination status. The seroprevalence for BT virus was 23%, and seropositive animals were widespread suggesting endemicity, despite the disease not having being previously reported. We found a few seropositives for EHDV and PPRV, which may suggest that these diseases are also present in Kazakhstan. An hierarchical model showed that seroprevalence to FMD and BT viruses were clustered at the farm/village level, rather than at a larger spatial scale. This was unexpected for FMD, which is subject to vaccination policies which vary at the raion (county) level